A6C_GSP_WFO_Roof_and_HVAC_Replacement_Statement_of_Work_Attachment_6C.pdf
PDF 158 KB Posted
- Attached to
- Roof & HVAC Replacement NWS WFO in Greer, SC
- Solicitation number
- 1305M326Q0300
About this file
This is a product accessories guide for JM White EPDM roofing materials and components distributed by Johns Manville.
The guide catalogs two primary categories of accessories: General Accessories and Peel and Stick Accessories. General Accessories include JM White EPDM Pre-Taped Curb Flashing (20" × 50', SKU 70009122) and JM White EPDM Seam Tape Plus available in 3" × 100' or 6" × 100' widths with self-adhering pressure-sensitive tape. Peel and Stick Accessories comprise multiple specialized products including JM White EPDM Peel and Stick Flashing (6", 9", or 12" wide options), Peel and Stick Sealing Strips (60 mil, 6" to 12" widths), Peel and Stick Walkpads (30" × 30" heavy-duty rubber pads, 50 per pallet, SKU 70009141), Peel and Stick Inside/Outside Corners (60 mil uncured EPDM, 1"–6" sizes), Peel and Stick Pipe Boots (5.75" round or 6" diameter, 100 per box, SKU 70009123), Peel and Stick T-Joint Patches (round uncured EPDM with factory-applied tape), and Peel and Stick Pourable Sealer Pockets (prefabricated penetration sealing units). Each product listing includes component classifications, type designations, applicable component codes, sizing specifications, quantity per box or pallet, and corresponding SKU numbers. Technical support is available at (800) 922-5922 or through JM.com/roofing.
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JM EPDM ACCESSORIES GUIDE
WHITE
RS-9374 12-24 (New)
GENERAL ACCESSORIES
QUESTIONS?
If you have questions about JM EPDM or any other JM products, please feel free to call (800) 922-5922. or scan the qr code below to take you right to JM.com/roofing
PEEL AND STICK ACCESSORIES
SIZE SKU
20" × 50' 70009122
JM White EPDM Pre-Taped Curb Flashing 60 mil thick, White EPDM with a release liner and a 3” factory laminated, self-adhering White EPDM tape to efficiently flash curbs with a consistent, clean appearance.
Component
Single Ply
Accessory A
Type
Curb/Corner
FC
SIZE QTY/BOX SKU
3" × 100' 4 Rolls/Box 70009129 6" × 100' 2 Rolls/Box 70009130
JM White EPDM Seam Tape Plus 3” or 6” wide, self-adhering, extruded White EPDM pressure-sensitive tape.
Component
Type
Single Ply
Accessory
Membrane Seaming
A
MS
Cured 6”, 9” or 12” wide White EPDM strip and factory applied pressure-sensitive tape.
6”, 9” or 12” wide, uncured White EPDM with a release liner and a factory laminated, self-adhering White EPDM tape.
SIZE QTY/BOX SKU
6" × 100' 2 Rolls/Box 70009118 9" × 100' 1 Roll/Box 70009119 12" × 50' 1 Roll/Box 70009121
SIZE QTY/BOX SKU
MIL
6" × 100' 2 Rolls/Box 70008833 9" × 50' 1 Roll/Box 70008834 12" × 50' 1 Roll/Box 70008835
JM White EPDM Peel and Stick Flashing
JM White EPDM Peel and Stick Sealing Strip
Component
Type
Single Ply
Accessory
Flashing Wall
A
FW
Curb/Corner
Penetration
FC
FP
Component
Type
Single Ply
Accessory
Membrane Seaming
A
MS
Finishing Edge
FE
SIZE QTY/PALLET SKU
30" × 30" 50/Pallet 70009141
SIZE QTY/BOX SKU
7" × 9" 20/Box 70008896
JM White EPDM Peel and Stick Walkpad
JM White EPDM Peel and Stick Inside/Outside Corner
1/4” x 30” x 30” heavy-duty, white solid rubber pads with three rows of 3” factory-applied pressure-sensitive tape to protect roofs from damaging foot traffic.
60 mil peel and stick uncured White EPDM used to install inside or outside corners. Can be used for either TPO or EPDM.
Component
Type
Single Ply
Accessory
Protection
A
PT
Component
Type
Single Ply
Accessory A
Curb/Corner
FC
SIZE QTY/BOX SKU
1" – 6" 10/Box 70009438
JM White EPDM Peel and Stick Pipe Boot White EPDM manufactured with conical steps and factory-applied pressure-sensitive tape around the base.
Component
Type
Single Ply
Accessory
Penetration
A
FP
SIZE QTY/BOX SKU
5.75" Round 100/Box 70009123
SIZE QTY/BOX SKU
6" (15.2 cm) Diameter 6/Box 70009124
JM White EPDM Peel and Stick T-Joint Patch
JM White EPDM Peel and Stick Pourable Sealer PocketRound, White uncured EPDM with a factory-applied pressure-sensitive tape.
One-piece, prefabricated unit with a factory-applied pressure-sensitive tape on the bottom of the base flange. Use to seal difficult-to-flash penetrations through the membrane.
Component
Type
Single Ply
Accessory
Membrane Seaming
A
MS
Component
Type
Single Ply
Accessory
Penetration
A
FP
File details come from the government source that posted it. Updated .