A1_TECHNICAL CAPABILITY DATA SHEET.pdf

ATTACHMENT 1 – TECHNICAL CAPABILITY DATA SHEET SOLICITATION SPE601-26-Q-0301

TECHNICAL CAPABILITY

OFFERORS ARE REQUIRED TO SUBMIT A TECHNICAL CAPABILITY STATEMENT FOR THIS

SOLICITATION.

Please submit fill-in data for the Technical Capability non-cost factor. A SEPARATE DATA SHEET MUST BE COMPLETED FOR EACH PRODUCT OFFERED. The offeror may also submit continuation sheets with this fill-in provision to provide additional technical narrative. The offer will be evaluated strictly on technical merit and should describe and justify the offeror's technical approach to the requirements of the work to be performed and/or delivery of product under the contract. The technical offer should be specific and provide concise, straight-forward descriptions of the offeror's capability to perform the requirements of the contract. Offers that are unrealistic in terms of the description of the offeror’s technical capability may be considered indicative of a lack of understanding of the solicitation’s requirements.

Offeror Name: __________________________________

Check Box if a Capability Statement is provided for the product:

☐ Product 1: Aviator Breathing Oxygen (NSN: 6830-016442463)

Product 1: Aviator Breathing Oxygen NSN: 6830-016442463

(i) General description of how the offeror will ensure a reliable supply of on-spec product and/or service to meet the Government’s requirements as stated in the solicitation.

(A) Production capability per day of proposed fill plant:

(B) Plant storage capacity for product offered:

(C) If the offeror will be making deliveries to customers, describe type, number and size of containers that will be used for delivery of product to each customer location that the offeror proposes on:

(D) If the contract requires maintenance and repair of Government owned equipment, such as repairs to cylinders or tube trailers, describe how such services will be performed to meet solicitation requirements.

(E) Describe the in-process quality control procedures that will ensure the production and delivery of on-spec product:

(F) Describe offeror’s proposed quality sampling plan that will be implemented to assure individual shipments made under this solicitation meet the product quality requirements stated in the applicable specification or product describe.

(ii) Description of Contractor-furnished equipment at a location other than the Contractor’s facility (e.g., on Government property) such as storage tanks.

(A) Describe all Contractor provided equipment to include a description of size, certifications, instrumentation (including alarms), design parameters, etc.

(B) Include a timeline for the purchase, installation, testing and commissioning of the equipment.

N/A

N/A

(iii) Describe the method for securing delivery container(s) and/or cargo tank openings with tamper indicating devices (i.e., seals) to prevent tampering and/or pilferage from the time the cargo tank is loaded until it is delivered to its destination. (Refer to the CONTRACTOR SEAL REQUIREMENT contract provision.)

(iv) For solicitations containing product CLINs, if the offeror is not the manufacturer of the product to be delivered under the contract or is otherwise proposing to provide product from a fill plant or production facility other than one owned and operated by the offeror, the offeror shall provide a written supply commitment letter from the owner of the fill plant or production facility from where the product will be obtained in performance of any resultant contract.

Are you the manufacturer of this product? ☐ Yes or ☐ No

If you are not the manufacturer of this product, who is your supplier? ___________________________

Did you provide a written supply commitment letter clearly indicating (A) The owner of the fill plant or production facility is willing to provide the products and/or services required to be delivered/performed under any resultant contract for the duration of the delivery period shown in the Schedule; and (B) Confirmation of the quantity and specification of the products to be delivered? ☐ Yes or ☐ No

(v) This paragraph describes additional information for the offer not asked for in above paragraphs.

NOTE:

• Product(s) to be supplied shall fully meet the requirements of the applicable specification(s) as stated in the Statement of Objectives (SOO), unless otherwise modified elsewhere in this solicitation and/or the resultant contract.

• The offeror shall provide an offer that provides a general description of how the offeror will ensure a reliable supply of on-spec product to meet the Government’s requirements.

• Offeror will provide a Quality Control Plan for Review.

Supplemental Quality Assurance Provision (SQAP) - E33.10 Manufacturing and Filling Points

(a) Provide the name, complete addresses and telephone number of the manufacturing and filling points for each product to be furnished, and identify the filling points as primary or secondary.

Aviator Breathing Oxygen Primary

Manufacturer Name:___________________________________________________

Complete Address: ____________________________________________________

POC Name:__________________________________________________________

Telephone Number: ___________________________________________________

Or

Aviator Breathing Oxygen Secondary

Manufacturer Name:___________________________________________________

Complete Address: ____________________________________________________

POC Name:__________________________________________________________

Telephone Number: ___________________________________________________