A04. A002 DI-SESS-81359B PARTS LIST.pdf

DATA ITEM DESCRIPTION

Title: Parts List

Number: DI-SESS-81359B Approval Date: 30 OCT 2006 AMSC Number: G6993 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: None Office of Primary Responsibility: NS/DA023 Applicable Forms: N/A

Use/relationship:

The Part List is required in support of the provisioning process and includes detailed parts information on each separate item of equipment. The required information will be sufficient enough to identify maintenance part support requirements for the field to the Lowest Replaceable Unit (LRU) level (unless specified otherwise as piece part or box level).

This Data Item Description (DID) contains format and content preparation instructions for the Parts List resulting from the work task described in paragraphs 3.2.7 through

3.2.8.4 of DOD-M-86001(NS).

This DID is applicable to the acquisition of Non Developmental Item (NDI) i.e.,Commercial-Off-The-Shelf (COTS) and Government 0ff-the-Shelf (GOTS) equipment.

This DID supersede DI-ILSS-81359A

Requirements:

1. Reference documents: The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as cited in the current issue of the DODISS at the time of the solicitation; for non DODISS-listed documents, as stated herein.

2. Format/Content: The Spare Parts List shall include the following data in accordance with paragraphs 3.2.7 through 3.2.8.4 of DOD-M-86001(NS).

3. Parts List. The parts list shall include all maintenance significant parts in the equipment which can be replaced and repaired in the field by maintenance personnel utilizing the LRU concept. Each assembly shall be broken down in top-down order with the part number proceeding the listing. For example, list an assembly by part number first then all of the printed circuit cards and modules by part number which comprise the assembly as described in the following:

Source: http://assist.dla.mil -- Downloaded: 2024-04-01T12:40Z Check the source to verify that this is the current version before use.

10. List Electro Static Discharge (ESD) requirements.

DI-SESS-81359B

a. List all parts which may require repair or procurement during the life of the equipment.

b. Do not list hardware items such as attaching parts, chassis, or frames, nor items

Normally supplied in bulk (wire, tubing, .etc) unless they are special type or Critical dimension.

c. Arrange the list in reference designator order.

d. Start with top assembly (equipment) then break down each assembly (A1, A2, etc) followed by replaceable chassis mounted components.

e Provide sufficient information of each item to permit its acquisition for the Manufacturer identified by CAGE code or from a similarly identified commercial Source.

f. The parts list shall contain the following information in the same order listed name.

1. The true manufacturer model and part number designated for each item.

System designers or end item manufacturers part numbers may be used as Acceptable true manufacturers numbers only for those items altered specifically for use in the item.

2. A description of each part. The identifying noun or item name

3. The reference designation of each part listed.

4. The true manufacturers CAGE code for each part(in lieu of the manufacturers noun name).

5. The quantity of each part in the equipment/unit.

6. The unit cost of each part at the time parts list is prepared.

7. Unit of issue.

8. Recommended quantity to sustain operation for the time period and under the conditions stated in the contract.

9. indicate presence and quantity of precious metals.

4. Component Location Illustration. (Figure 1) To support the parts list described in 2 above a component location illustration is required which can be either a photograph or a line drawing as long as the location of each part on the part list is identified.

5. END OF DI-SESS-81359B

DI-SESS-81359B

DATA ITEM DESCRIPTION