A004 DID Contractor Configuration Management Plan.pdf
PDF 121 KB Posted
- Attached to
- F16 BSCR Federal contract opportunity
- Solicitation number
- SPRHA1-20-R-7003
- Issued by
- Defense Logistics Agency Aviation
About this file
This Data Item Description provides the format and content requirements for a Supplier's Configuration Management Plan related to the F-16 Brake Control System solicitation issued by Defense Logistics Agency Aviation. The Supplier's CM Plan must identify the supplier's processes and procedures for configuration management and planning over the product lifecycle, configuration identification, configuration change management to control and document the product and its configuration information through end of life, and configuration status accounting to record and report information needed to trace and manage the product configuration, including hardware, software, and firmware. Verification and audits must also be established to ensure consistency of product information. The plan shall be prepared in the supplier's own format and provided to the government for review, evaluation, and monitoring of the supplier's CM program and associated proposed components.
View the file
Other files for this federal contract opportunity
Show all 50
F16 BSCR has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: SUPPLIER’S CONFIGURATION MANAGEMENT PLAN
Number: DI-SESS-80858D Approval Date: 20200211
AMSC Number: N10144 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Preparing Activity: NM Project Number: SESS-2020-007
Applicable Forms: N/A
Use/relationship: The Supplier’s Configuration Management (CM) Plan describes the organization, procedures, and controls of the Supplier’s CM program. The principle use is to provide the
Government a basis for review, evaluation, and monitoring of the CM program and associated proposed components.
a. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in EIA-649-1 and the principles of EIA-649 (Copies of these standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel 877-606-7323 [inside USA and Canada] or 724-776-4970 [outside
USA]).
b. This DID supersedes DI-SESS-80858C.
Requirements:
1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2. Format. The Supplier’s CM plan shall be prepared in Supplier format.
3. Content. The Supplier’s CM plan shall identify the Supplier’s processes and procedures for:
a. Configuration management and planning over the lifecycle of a product.
b. Configuration identification throughout the product lifecycle.
c. Configuration change management involves controlling and documenting the product and its product configuration information to the product’s end of life.
d. Configuration status accounting involves recording and reporting of information needed to trace and manage configuration of a product.
e. Verification and audits to ensure consistency of product information are established and maintained in the execution of the total configuration, including hardware, software, and firmware.
End of DI-SESS-80858D
DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.
Source: http://assist.dla.mil -- Downloaded: 2020-07-15T18:59Z
Check the source to verify that this is the current version before use.
http://www.sae.org/
File details come from the government source that posted it. Updated .