A003 Inspection Test Plan LFI Strips.pdf
PDF 87 KB Posted
- Attached to
- Manufacturing of LFI Strips
- Solicitation number
- W911SR-23-R-0005
About this file
This document is a Contract Data Requirements List (CDRL) outlining quality control procedures for the manufacturing of Lateral Flow Immunoassay (LFI) strips under Solicitation W911SR-23-R-0005 issued by the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground. The CDRL requires the contractor to submit an overarching Inspection and Test Plan including First Article Test, Production Article Test, Stability Test, and Sampling Plans. The plan must outline inspection and testing throughout manufacturing, including receipt inspection, in-process inspections, physical inspections of LFI strips, and operational testing of the strips in the Handheld Assay configuration. The detailed plan is due 30 days after contract award for government review, with final plan incorporating comments due 15 days after receipt of feedback. The plan shall be submitted electronically to two specified government recipients.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
| A_CONTRACT_LINE_ITEM_NO: TBD |
| B_EXHIBIT: |
| TDP: |
| TM: |
| OTHER: x |
| DSYSTEMITEM: |
| E_CONTRACTPR_NO: TBD |
| FCONTRACTOR: TBD |
| 1_DATA_ITEM_NO: A003 |
| 2_TITLE_OF_DATA_ITEM: Inspection and Test Plan |
| 3_SUBTITLE: |
| 4_AUTHORITY_Data_Acquisit: DI-QCIC-81110 |
| 5_CONTRACT_REFERENCE: |
| 6_REQUIRING_OFFICE: JPL CBRND EB-DBPAO |
| 7_DID_250_REQ: |
| 8_APP_CODE: A |
| DIST_STATEMENT: |
| 10_FREQUENCY: One/R |
| 11_AS_OF_DATE: award date |
| 12_DATE_OF_FIRST_SUBMISSI: see blk 16 |
| 13_DATE_OF_SUBSEQUENT_SUB: see blk 16 |
| addressee1: See address in |
| draft1: 2 |
| reg1: 2 |
| repro1: |
| addressee2: blk 16 |
| draft2: |
| reg2: |
| repro2: |
| addressee3: |
| draft3: |
| reg3: |
| repro3: |
| addressee4: |
| draft4: |
| reg4: |
| repro4: |
| addressee5: |
| draft5: |
| reg5: |
| repro5: |
| addressee6: |
| draft6: |
| reg6: |
| repro6: |
| addressee7: |
| draft7: |
| reg7: |
| repro7: |
| addressee8: |
| draft8: |
| reg8: |
| repro8: |
| addressee9: |
| draft9: |
| reg9: |
| repro9: |
| addressee10: |
| draft10: |
| reg10: |
| repro10: |
| addressee11: |
| draft11: |
| reg11: |
| repro11: |
| addressee12: |
| draft12: |
| reg12: |
| repro12: |
| addressee13: |
| draft13: |
| reg13: |
| repro13: |
| addressee14: |
| draft14: |
| reg14: |
| repro14: |
| addressee15: |
| draft15: |
| reg15: |
| repro15: |
| addressee16: |
| draft16: |
| reg16: |
| repro16: |
| addressee17: |
| draft17: |
| reg17: |
| repro17: |
| addressee18: |
| draft18: |
| reg18: |
| repro18: |
| addressee19: |
| draft19: |
| reg19: |
| repro19: |
| addressee20: |
| draft20: |
| reg20: |
| repro20: |
| addressee21: |
| draft21: |
| reg21: |
| repro21: |
| addressee22: |
| draft22: |
| reg22: |
| repro22: |
| addressee23: |
| draft23: |
| reg23: |
| repro23: |
| addressee24: |
| draft24: |
| reg24: |
| repro24: |
| addressee25: |
| draft25: |
| reg25: |
| repro25: |
| addressee26: |
| draft26: |
| reg26: |
| repro26: |
| addressee27: |
| draft27: |
| reg27: |
| repro27: |
| addressee28: |
| draft28: |
| reg28: |
| repro28: |
| addressee29: |
| draft29: |
| reg29: |
| repro29: |
| addressee30: |
| draft30: |
| reg30: |
| repro30: |
| addressee31: |
| draft31: |
| reg31: |
| repro31: |
| addressee32: |
| draft32: |
| reg32: |
| repro32: |
| addressee33: |
| draft33: |
| reg33: |
| repro33: |
| addressee34: |
| draft34: |
| reg34: |
| repro34: |
| addressee35: |
| draft35: |
| reg35: |
| repro35: |
| addressee36: |
| draft36: |
| reg36: |
| repro36: |
| addressee37: |
| draft37: |
| reg37: |
| repro37: |
| addressee38: |
| draft38: |
| reg38x: |
| repro38: |
| total_draft: 2 |
| total_repro: 0 |
| 16_REMARKS: Blk 4. DID can be obtained from https://quicksearch.dla.mil/qsSearch.aspx. |
The contractor shall provide an overarching Inspection and Test Plan that includes the following test plans: First Article Test (FAT) Plan, Production Article Test (PAT) Plan, Stability Test Plan, and Sampling Plan. The Inspection and Test Plan shall outline quality control procedures to include inspection and testing throughout the manufacturing process that includes inspection of components upon receipt, in-process inspections, physical inspections of LFI strips, and operational testing of the LFI strips (i.e., testing in the Handheld Assay configuration).
Blk 8. Government will respond within 30 days following receipt of detailed plan.
Blk 12. Submit a detailed plan 30 days after contract start for Government review and comment.
Blk 13. Submit final plan 15 days after receipt of Government comments.
Blk 14. and Blk 15. Submit via e-mail in Microsoft Office format to:
susan.e.ruzicka2.civ@army.mil and bryan.d.necciai.civ@army.mil
| 17_PRICE_GROUP: | |
| ESTIMATED_TOTAL_PRICE: | |
| G_PREPARED_BY: | |
| H_DATE: 1/6/2023 | |
| 1_APPROVED_BY: | |
| J_DATE: | |
| Page: | |
| of_pages: | |
| Reset: | |
| reg38t: 2 | |
| 2023-01-06T14:30:04-0500 | |
| REDMOND.BRADY.WAYNE.1280051590 |
File details come from the government source that posted it. Updated .