A002 DI-SESS-81000ET Drawing.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER __X__

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-81000E/T

5. CONTRACT REFERENCE

PD 1.4.2.1

6. REQUIRING OFFICE

402 CMXG/MXDEF

7. DD 250 REQ

NO

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

ONE/R

12. DATE OF 1ST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

N/A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft

Final

Reg Repro

15. TOTAL 0 1 0

J. DATE

DD Form 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page _ _ of __Pages

18. ESTIMATED

TOTAL PRICE

17. PRICE

GROUP

D. SYSTEM/ITEM

Die & Mold

1 1

G. PREPARED BY DATE

A002 Developmental Design Drawings, Models, and Associated Lists

16. REMARKS

Blocks 11, 12, 13:

The TDP will be defined on a unique call basis. The 2D drawings are level 2 and not entered into the RAFB repository.

The TDP shall provide the necessary engineering design, manufacturing, first article testing and quality assurance requirements information necessary to enable the procurement or manufacture of an interchangeable item that duplicates the physical and performance characteristics of the original product without additional design engineering effort or recourse to the original design activity or any third party. Vendor Item Control Drawings shall be used to specify the requirements for purchased items when such items have been approved for use in the design and are used without alteration, selection or source qualification (testing of an item prior to procurement action to ensure that it satisfies the specified requirements). All engineering product definition data created using Government funding as a result of this contract shall be considered a part of the TDP and shall be delivered to the Government with unlimited rights. The TDP shall be delivered in accordance with Air Force Product Data Specification drawing 9579776 (CAGE 98752) and Air Force Drawing Requirement 9626025, reference attached DD Form 1423 Block 16. The Contractor drawings received shall be Level 2 and the Contractor will not be required to enter drawings into the RAFB Data Repository.

The final TDP shall represent the approved, tested, and accepted configuration of the defined delivered item(s). The required TDP data shall be specified on the unique call.

Addressee:

The electronic file shall be emailed to:

Technical Focal Point listed on each call.

SEE BLK 16

ELECTRONIC 1 1 0

Christine L. Clark Christine L. Clark04 May 2021 04 May 2021

1230481071C Cross-Out