(A-18) Attachment 1- Milford- Office- Janitor.pdf

Attachment 01 A-18 Milford Lake Project

Office- Janitor

VENDOR’S INFORMATION

OFFEROR’S NAME:

OFFEROR’S ADDRESS:

OFFEROR’S PHONE #:

OFFEROR’S EMAIL:

OFFEROR’S DUNS #:

OFFEROR’S CAGE CODE #:

SIGNATURE:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Custodian – Janitorial Services – Base Year 2021

FFP

The Government's payment for Custodian – Janitorial services shall constitute full compensation to the Contractor for furnishing all labor, equipment, and materials;

and performing all operations required to complete the work in conformity with Performance Work Statement (PWS) located in section C.

FOB: Destination

NET AMT

0002 1 Job OPTION Custodian – Janitorial Services – Option Year 2022

FFP

The Government's payment for Custodian – Janitorial services shall constitute full compensation to the Contractor for furnishing all labor, equipment, and materials;

and performing all operations required to complete the work in conformity with

0003 1 Job OPTION Custodian – Janitorial Services - Option Year 2023

FFP

The Government's payment for Custodian – Janitorial services shall constitute full compensation to the Contractor for furnishing all labor, equipment, and materials;

and performing all operations required to complete the work in conformity with

TOTAL (BASE PLUS

OPTION(S))

November 24, 2020 1

A-18

PROJECT OFFICE JANITORAL CONTRACT

MILFORD PROJECT

Performance Work Statement

C.1 General Information

C.1.1 Background.

Milford Project is the largest lake in Kansas with a shoreline of 163 miles at multipurpose pool. Recreational development is extensive with eleven parks and access areas, managed by or leased from the U.S. Army Corps of Engineers, conveniently located around the reservoir. Park areas at Milford offer a wide variety of recreation facilities including boat launching ramps, campgrounds, full service marinas, picnic areas, sand and swimming beaches. The Kansas Department of Wildlife and Parks operate a fish hatchery and conservation education center in the Outlet area below the dam. Many routine maintenance items are contracted to the private sector. Mowing, refuse collection, and facility cleanup are just a few of the activities that are performed by private contractors for the Corps.

C.1.2 Scope of Work The services furnished under this contract shall consist of a prework conference, and furnishing labor, material and equipment as specified in SECTION C.3, to maintain the facilities listed below at the Milford Lake Project, near Junction City, Kansas, in a clean and orderly condition in accordance with general commercial practices. Two quality standards are used by Government inspectors to determine satisfactory versus unsatisfactory services. The quality level is expressed as "A" or "B," following the facilities to be serviced (see section 5.3.2).

C.1.3 Period of Performance The contract shall begin 1 February 2021 and continue through 30 September 2021 with renewal option years for 1 October 2021 through 30 September 2022, 1 October 2022 through 30 September 2023.

C.1.3.1 All cleaning services shall be performed any time between 7:00 a.m. and 3:00 p.m. except as otherwise provided for herein, at such times and in such manner as not to interfere with office operations, as directed by the Project Manager.

C.1.3.2 Services shall be performed as follows:

(1) Daily duties: One day per week, on Friday during the period of 1 January thru 31 December.

(2) Monthly duties: 1st week of each month.

(3) Quarterly duties: 1st week of January, April, July and October.

(4) Semi-annual duties: In the month of April and October

C.1.3.3. All work shall be accomplished within the time frames specified above. Services rendered outside of the time periods specified will not be compensated unless specifically approved in writing by the Contracting Officer.

C1.4 Required Insurance

C1.4.1 The contractor shall obtain and maintain during the period of performance under this contract Commercial Automobile Liability insurance according to the applicable Kansas State statutes.

THE FOLLOWING SCHEDULE OF INSURANCE IS APPLICABLE

A. Order’s of $10,000.00 to $25,000.00 Type Amount

Worker’s Compensation Coverage complying with Applicable

State Statute Employer’s Liability Minimum amounts of $100,000 Commercial General Liability Minimum amounts of $300,000 Commercial Automobile Liability Minimum limits of $100,000 per

Person & $300,000 per accident for Bodily injury, & $100,000 per

Accident for property damage

B. Orders under $10,000 Type Amount Worker’s Compensation In accordance with applicable State Statute.

Employer’s Liability In accordance with applicable State Statute.

Commercial General Liability In accordance with applicable State Statute.

Commercial Automobile Liability In accordance with applicable State Statute.

NOTE: Coverage required under A & B (above) are minimums. If higher limits of coverage are required by State Statute, the Contractor shall be responsible for State requirements may be obtained by contacting:

KANSAS: Insurance Commissioner, Toll Free, 1-800-432-2484 Division of Workers Compensation, 785-296-3441

Proof of insurance shall be provided to the Contracting Officer’s Representative prior to commencement of duties.

C.1.5 Post Award Conference After award, but prior to commencement of work, the Contractor shall contact the Contracting Officer’s Representative, to arrange a mutually agreeable time to meet at the Milford Project Office to review the requirements and details of the work

C.1.6 Quality Control The Contractor shall develop a Quality Control Plan designed to demonstrate how the Contractor will meet the needs of the project. The Quality Control Plan shall document how the Contractor will identify and correct performance shortfalls. Complete records of all inspection work performed by the contractor must be maintained and made available to the government during contract performance.

C.1.7 QUALITY ASSURANCE:

C.1.7.1 Performance Assessment Plan.

A Performance Assessment Plan (PAP) will be used during the life of the contract to ensure that the Service Provider is performing the services required by this PWS in an acceptable manner. The Government develops the PAP and the Project Office administers the Plan through Quality Assurance Evaluators (QAE)s.

C.1.7.2 The Government will monitor the Contractor’s performance under this contract using quality assurance procedures developed by the Government. Typical procedures might include random sampling, checklists and customer complaints. This should not be considered an exhaustive list. A primary objective of Government Quality Assurance will be to determine the effectiveness of the Contractor’s quality control system.

C.1.7.3 The government reserves the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract.

The government will perform inspections and tests in a manner that will not unduly delay the work.

C.1.7.4 If any of the services do not conform to contract requirements, the government will request the contractor to perform the services again, where appropriate, in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by re-performance, the government may (1) require the contractor to take necessary action to ensure that future performance conforms to contract requirements and (2) reduce the contract price to reflect the reduced value of the services performed.

C.1.7.5 If the contractor fails to promptly re-perform the services or to take the necessary action to ensure future performance in conformity with contract requirements, the government may by contract, or otherwise: (1) perform the services and charge to the Contractor any cost incurred by the government that is directly related to the performance of such service or (2) terminate the contract in whole or in part.

C.1.8 Personnel

C.1.8.1 All Contractor personnel shall be fully clothed, at all times, while performing these services. Clothing shall be clean and neat in appearance.

C.1.8.2 Contractor personnel shall utilize tact, diplomacy and courtesy at all times during contact with the public.

C.1.8.3 The contractor shall exercise tact, diplomacy, and courtesy and present a neat appearance when dealing with the public. A government-furnished nametag must be worn while on duty.

C.1.8.4 The contractor must turn in to Corps of Engineer personnel all lost and found articles..

C.1.8.3 The contractor must not consume any alcohol or drugs (except prescription drugs) during duty hours or when meeting the public.

C.1.9 Coordination with the Project Office

C.1.9.1 As each item of work is completed, the Contractor's representative at the job shall enter the time that the item of work was completed on a Contractor's Daily Worksheet.

Completed and signed worksheets shall be delivered each day work is performed, as directed by the Contracting Officer's Representative. Contractor Daily Worksheet (See Section C.6) forms shall be furnished by the Government.

C.1.9.2 Day to day contact with Government personnel, and telephone communication shall normally provide adequate information exchange. The Government reserves the right to schedule meetings at the Project Office as necessary to insure strict compliance with the terms of this contract. Such meetings shall be scheduled, to the extent possible, at mutually convenient times. However, upon notice, the Contractor shall attend meetings regarding matters affecting this contract.

C.1.9.3 To assist the visiting public in reclaiming lost articles, all property left by visitors and found during cleanup operations shall be turned in to the Project Office.

C.1.9.4 Any evidence of vandalism, instances of facilities not operating properly, or are in need of repair, shall be promptly reported to project personnel.

C.1.10 Other Contractors

The Government may undertake or award other contracts for additional work, and the Contractor shall fully cooperate with such other contractors and Government employees.

All work shall be carefully planned and fitted not to interfere with such other work. The Contractor shall not commit or permit any act that will interfere with the performance of work by other contractors or by Government employees.

C.1.11 Safety The contractor shall immediately report any situation that could affect the health or safety of visitors to a Corps of Engineers employee; including maintenance needs, utility problems, accidents, or violations of laws and regulations.

C.1.11.1 The contractor will be given an after-hours phone number (at the post award conference) for use by him and his staff only.

C.1.11.2 The contractor must notify the COR of any required prescription drugs which might affect the contractor's ability to perform the requirements of this contract.

C.1.11.3 The contractor shall display a sign reading "CLOSED FOR CLEANING" at the entrance (doors) of all facilities during cleaning operations if cleaning is done during normal business hours.

C.1.11.4 Other Contractors: The Government may undertake or award other contracts for additional work, and the Contractor shall fully cooperate with such other contractors and Government employees. All work must be carefully planned and fitted not to interfere with such other work. The Contractor shall not commit or permit any act that will interfere with the performance of work by other contractors or by Government employees.

C.2 Definitions and Acronyms: The following definitions and descriptions apply wherever the word, phrase, or acronym is used in this performance work statement.

The following definitions and descriptions apply wherever the word, phrase, or acronym is used in this performance work statement.

Clean: As used generally, means free of all foreign matter, film, spots, streaks, dirt or impurities. As used for acceptance of work means gleaming, free from dirt, contamination, or impurities, unsoiled, unstained, neat and tidy.

Contracting officer's representative means an individual designated and authorized in writing by the contracting officer to perform specific technical or administrative functions.

Debris: Any articles, or parts thereof, such as paper, gum, litter, strings, cigarette butts, leaves, and sand.

Dirt: Particles of sand, soil, grit, or pebbles; mud, dust, tar, liquid stains, vomit, and/or ashes.

Foreign Matter: Any articles, or parts thereof, not belonging to the place found.

Fully-Clothed: Deemed to mean that a sleeved shirt (or T-shirt), trousers, and shoes shall be worn at all times: except that this requirement shall not be construed to replace or eliminate the necessity for the wearing of appropriate protective clothing or devices as may be required for the application of various chemicals.

Performance-Based Contract: (FAR 2.101) Structuring all aspects of an acquisition around the purpose of the work to be performed with the contract requirements set forth in clear, specific, and objective terms with measurable outcomes as opposed to either the manner by which the work is to be performed or broad and imprecise.

Performance Requirements Summary (PRS): The PRS shows contract requirements, the component requirements related to each contract requirement, the price of each work requirement as a percentage of the associated contract requirement (Fixed Price Contracts), the standard of performance, and the acceptable quality level (AQL) for each work requirement. (Added) (Agree)

Quality Assurance Surveillance Plan (QASP): An organized written document used by Government for quality assurance surveillance. Document contains sampling/ evaluation guides, checklists, and the performance requirements summary (PRS). (Added)

Quality Control (QC): A method used by the Contractor to control the quality of goods and services provided.

Quality Assurance (QA): A method used by the Government to provide some measure of control over the quality of purchased goods and services received.

"Service contract" means a contract that directly engages the time and effort of a contractor whose primary purpose is to perform an identifiable task rather than to furnish an end item of supply. A service contract may cover services performed by either professional or nonprofessional personnel whether on an individual or organizational basis. Some of the areas in which service contracts are found include the following:

(a) Maintenance, overhaul, repair, servicing, rehabilitation, salvage, modernization, or modification of supplies, systems, or equipment.

(b) Routine recurring maintenance of real property.

(c) Housekeeping and base services.

(d) Operation of Government-owned equipment facilities, and systems.

C.3 Government-Furnished Materials and Supplies. Government-Furnished materials and supplies are provided to the Contractor only for use in performing work specified in this Contract.

C.3.1 When the property is delivered, the Contractor shall verify its quantity and condition in writing to the Contracting Officer or his authorized representative on Memorandum Receipt, ENG Form 4866, within 48 hours of receipt. Damages will be reported in writing, to the Contracting Officer or his authorized representative, within 72 hours.

C.3.2 Item (description) Quantity Where Available Approx. Value

(1) Mops and bucket Project Office

(2) Carpet Cleaner Vacuum 1 ea Project Office $1800

C.3.3 Consumable Items - The following consumable items, exempt from accounting procedures as per EFARS 45.105(a) will be furnished to the Contractor by the Government from stock. The Government will retain control of expendables, to be dispensed on an as-needed basis for use in performance of the contract.

(1) Toilet tissue

(2) Paper towels

(3) Plastic liners for trash cans

(4) Water for cleaning

(5) Carpet Shampoo

C.4 Contractor Furnished Equipment and Supplies The Contractor shall furnish the following:

(1) Vacuum Cleaner

(2) Cleaning products such as cleansers, disinfectants and furniture polish.

(3) Scrub brushes and pads.

(4) Cleaning rags and towels.

C.5 Specific Tasks

C.5.1 General Information

Cleanup of facilities is directly related to public health and sanitation; therefore, it is essential that all facilities be serviced as specified. In the event that an area or facilities within an area are missed, or are not properly cleaned, the Contractor shall reclean the area or affected facilities immediately upon receipt of such notice from the Contracting

Officer or his Authorized Representative. Failure to correct noted deficiencies may result in withholding payment for the work not performed. Equipment breakdown shall not relieve the Contractor of the responsibility of performing the work as specified. The Contractor shall assure that he has, or can obtain on short notice, sufficient backup equipment to continue the services as specified without interruption in the event of mechanical failure of his primary equipment.

C.5.2 Scheduled Services

C.5.2.1 All work shall be accomplished within the time frames specified above. Services rendered outside the time periods specified will not be compensated unless specifically approved in writing by the Contracting Office or his approved representative.

C.3 Specific Tasks

C.5.3.1 General Information Services shall be performed in accordance with the attached work standard. Facilities subject to service and level of quality required shall be as follows:

(1) Administration Building ………………………………………………… Category A

(2) Conference Room/Maintenance Office……………………………… Category A

(3) Carpenter Office/Toilet ………………………………………………… Category B

C.5.3.2 WORKMANSHIP:

Two quality standards are used by Government inspectors to determine satisfactory versus unsatisfactory services. The quality level is expressed as "A" or "B," following the facilities to be serviced (see C.5.3.2.1 and C.5.3.2.2).

C.5.3.2.1 Category A services will be required in facilities of high public exposure. Such areas or buildings often form the visitor's "first impression" of the Corps of Engineers, and janitorial services will be inspected against a very rigid standard. Precise description is difficult, but contractors may associate Category A work with "military spit and polish," where very few defects will be permitted.

C.5.3.2.2 Category B services will be inspected against the standard of cleanliness that could reasonably be expected to exist in a well maintained office, shop or place of business on a day-to-day basis. This shall not be construed to indicate that unsatisfactory services will be tolerated, but rather to distinguish Category B services from the "higher-than-normal" standard of Category A.

C.5.4 PERFORMANCE:

C.5.4.1 Buildings, and fixtures; e.g., baseboards, door trim, furniture, etc. shall NOT be scratched or disfigured by tools utilized in cleaning. Furniture and other items moved during cleaning shall be returned to their proper locations. Upon completion, rooms shall appear orderly and well cared for.

C.5.4.2 Care shall be taken to insure that no staining of floor, baseboards, walls, furniture or woodwork results from water or chemicals used in performance of services.

C.5.4.3 Janitorial service is directly related to public health and sanitation; therefore, it is essential that all facilities be serviced as specified. In the event that an area or items within a facility are missed or are not properly cleaned, the Contractor agrees to return and reclean the area or affected items immediately upon receipt of such notice from the Contracting Officer or his authorized representative.

C.5.4.4 In order to assure that the required services are performed in strict accordance with Category A and/or B (above), the Contractor shall designate, in writing, a responsible member of each work crew who shall serve as the contact for matters involving quality and performance or nonperformance of the required work assigned to that crew. The employee(s) designated in accordance with the above requirement shall be qualified and fully competent with full authority to act for, and on behalf of, the Contractor as necessary to ensure that the work described herein is performed in accordance with these specifications. The Contractor shall furnish the above written designation to the Contracting Officer no later than the first day of work. The designation shall include the name(s), address(es), and telephone number(s) of the responsible individual(s). The Contracting Officer reserves the right to disapprove any individual whom he considers to be incompetent to perform the work required. Such disapprovals will be given to the Contractor by written notice, and the Contracting Officer's decision shall represent a final decision.

C.5.4.5 DAMAGES:

Contractor is responsible for any damages to government property.

C.5.5 Scheduled Services

C.5.5.1 All scheduled services shall begin on the first Friday of February 2021.

C.5.6 Schedule of Duties

LEGEND

D = Daily (at each cleaning) M = Monthly Q = Quarterly S = Semi-Annual/last Saturday April and October

NOTE: Care shall be taken when cleaning, to prevent contamination of parts, tools, disassembled machinery, etc.; with dirt, dust, water or chemicals from cleaning. Contractor shall clean around machines, tools and equipment without moving them.

C.5.6.1 CLEANING FREQUENCY

(1) Carpeted, approx. 2,490 sq. feet

(a) Vacuum and remove spots . . . . . . . . . . . . . . . . . . .___D____

(b) Vacuum, and shampoo. . .. . . . . . . . . . . . . . . . . . ____S____

(2) Tile, approx. 110 sq. feet

(a) Vinyl tile to be cleaned free of dirt and other foreign matter………………… . . . . . . . . . . . . . . . . . . . . . ____D____

(b) Ceramic tile approx. 85 sq. feet. Clean surface to be free of dirt and other foreign matter. ………………..____D_____

(c) Concrete floors approx. 25 sq. feet. Clean surface to be free of dirt and other foreign matter. …………….____D_____

C.5.6.2. FURNITURE (includes, chairs, desks, tables, cabinets, shelves, etc.)

(1) Fabric

(a) Surface to be free of dust, spots, stains and other foreign matter……………………………………. . . . . ____D_____

(2) Vinyl foreign matter………………………. . . . . . ... . . . . . ____D_____

(3) Wooden furniture, desk top shelves foreign matter……………………. . . . . . . . . . . . . . . ____D_____

(b) Polish with an appropriate polish . . . . . . . . . . . . . . . ____M____

C.5.6.3 WINDOW ACCESSORIES (shades and blinds) ____7____ (number)

(1) Clean to be free of dust and other foreign matter. . . ....__Q_____

C.5.6.4 GLASS CLEANING

(1) Both sides of interior door glass, glass dividers, and inside surface of exterior doors and windows approx. 350 sq. feet. Note: At some locations, clear plexiglass or similar materials are used that may require special chemicals and cleansing methods, as determined by the Project Manager. . . . . . . . . . . . . . ____D_____

(2) Exterior windows and doors (when temperature is above freezing), approx. 230 sq. feet. exterior surface of all exterior windows and doors. . . . . . . ____Q_____

C.5.6.5 DOORS, DOOR FRAMES, WINDOW FRAMES, AND WALL CLEANING

(paneled, painted, papered, tiled and vinyl covered), approx. 11,800 sq. feet)

(1) Spot clean, wipe down, dust or vacuum according to surface type. . . . . . . . . . . . . .. . . . . . . . . . .____D_____

C.5.6.6 LIGHT FIXTURES ____10____

(number)

(1) Clean to be free of dust and other foreign matter. …….____D_____

C.5.6.7 SINKS, COUNTER TOP AND APPLIANCES .

(1) Sinks, microwave and table/counter top shall be cleaned and free from dirt, stains and other foreign matter. . . . . D_____

C.5.6.8 WASTE REMOVAL

(1) Waste baskets shall be emptied and wiped clean.

Replace plastic liner (if used), outside cigarette urn, sift sand and replace liner. . . . . . . . . . . . . . . . . . … .____D_____

C.5.6.9 WATER FOUNTAINS (2) AND REST ROOM FIXTURES (4 restrooms)

(number) (number)

(1) Water fountains, lavatories, stools, urinals, partitions, mirrors, chrome fixtures, etc., shall be cleaned, dried, and shiny surfaces buffed with a soft cloth to restore sheen. All surfaces should be free from spots, stains and other foreign matter ……… _ D_____

C.5.6.10 CEILINGS - Check ceilings and clean as needed be free from spots, stains and other foreign matter. . . . . .. ….____D_____

C.5.6.11 VISITOR CENTER (18) DISPLAYS AND BROCHURE RACKS

(number)

(1) Special care must be taken while cleaning so as not to mar or scratch the displays and brochure racks.

Contractor will not clean the interior of any displays.

Contractor will only use cleaning supplies approved by the Contracting Officer to clean the displays, Display and brochure rack surfaces will be dusted and/ or cleaned with the appropriate cleaning supplies. . . . . . . . . D____

C.5.3.12 MISCELLANEOUS

(1) Toilet tissue, paper towels, soap, and deodorant blocks shall be replenished as needed . . . . . . . . . . …... __D____

(2) All refuse and debris collected during performance of services shall be deposited in a Government-furnished trash receptacle, as directed by the Project Manager… ___D_____

(3) As each item of the work is accomplished, the Contractor's representative at the job, or his employee(s) performing the work, shall complete that portion of the Contractor's Daily Worksheet indicating the time the task was completed. Completed worksheets shall be signed and delivered each day services are performed, as directed by the Contracting Officer or his authorized representative. . . . . . . . . . . . . . . . . . . . . . . . ____D_____

C.5.3.4 All work shall be accomplished within the timeframes specified above. Services rendered outside the time periods specified shall not be compensated unless specifically approved in writing by the Contracting Officer or his authorized representative.

C.5.4 Service Facilities / Areas

*NOTE: All acreages and square footages are estimated. The Contractor shall be responsible for determining exact acreages and conditions affecting performance of this work.

C.6 Applicable Publications and Forms

C.6.1 MAP: Information on Milford Lake can be found on the Internet at https://www.nwk.usace.army.mil/Locations/District-Lakes/Milford-Lake/ https://www.nwk.usace.army.mil/Locations/District-Lakes/Milford-Lake/

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5344 Daniel W. Simms Division of | Revision No.: 14 Director Wage Determinations| Date Of Last Revision: 06/03/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas

Area: Kansas Counties of Brown Clay Cloud Dickinson Geary Marshall Morris Nemaha Ottawa Republic Saline Washington

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.45 01012 - Accounting Clerk II 15.10 01013 - Accounting Clerk III 16.89 01020 - Administrative Assistant 20.89 01035 - Court Reporter 19.53 01041 - Customer Service Representative I 11.73 01042 - Customer Service Representative II 13.18 01043 - Customer Service Representative III 14.39 01051 - Data Entry Operator I 13.00 01052 - Data Entry Operator II 14.18 01060 - Dispatcher Motor Vehicle 17.43

01070 - Document Preparation Clerk 13.75 01090 - Duplicating Machine Operator 13.75 01111 - General Clerk I 13.02 01112 - General Clerk II 14.21 01113 - General Clerk III 15.95 01120 - Housing Referral Assistant 18.91 01141 - Messenger Courier 12.44 01191 - Order Clerk I 14.68 01192 - Order Clerk II 16.02 01261 - Personnel Assistant (Employment) I 15.83 01262 - Personnel Assistant (Employment) II 17.70 01263 - Personnel Assistant (Employment) III 19.73 01270 - Production Control Clerk 22.29 01290 - Rental Clerk 15.98 01300 - Scheduler Maintenance 15.17 01311 - Secretary I 15.17 01312 - Secretary II 16.97 01313 - Secretary III 18.91 01320 - Service Order Dispatcher 15.01 01410 - Supply Technician 20.89 01420 - Survey Worker 14.40 01460 - Switchboard Operator/Receptionist 12.71 01531 - Travel Clerk I 13.06 01532 - Travel Clerk II 13.76 01533 - Travel Clerk III 14.82 01611 - Word Processor I 13.53 01612 - Word Processor II 15.19 01613 - Word Processor III 16.99 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 19.56 05010 - Automotive Electrician 17.36 05040 - Automotive Glass Installer 16.62 05070 - Automotive Worker 16.62 05110 - Mobile Equipment Servicer 15.23 05130 - Motor Equipment Metal Mechanic 18.03 05160 - Motor Equipment Metal Worker 16.62 05190 - Motor Vehicle Mechanic 18.03 05220 - Motor Vehicle Mechanic Helper 14.59 05250 - Motor Vehicle Upholstery Worker 15.96 05280 - Motor Vehicle Wrecker 16.62 05310 - Painter Automotive 17.36 05340 - Radiator Repair Specialist 16.62 05370 - Tire Repairer 16.37 05400 - Transmission Repair Specialist 18.03 07000 - Food Preparation And Service Occupations 07010 - Baker 12.42 07041 - Cook I 11.23 07042 - Cook II 12.83 07070 - Dishwasher 8.95 07130 - Food Service Worker 10.31

07210 - Meat Cutter 13.93 07260 - Waiter/Waitress 9.02 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 18.00 09040 - Furniture Handler 12.56 09080 - Furniture Refinisher 18.00 09090 - Furniture Refinisher Helper 13.93 09110 - Furniture Repairer Minor 16.07 09130 - Upholsterer 18.00 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.11 11060 - Elevator Operator 11.92 11090 - Gardener 16.52 11122 - Housekeeping Aide 11.92 11150 - Janitor 11.92 11210 - Laborer Grounds Maintenance 12.91 11240 - Maid or Houseman 10.49 11260 - Pruner 11.72 11270 - Tractor Operator 15.31 11330 - Trail Maintenance Worker 12.91 11360 - Window Cleaner 13.13 12000 - Health Occupations 12010 - Ambulance Driver 14.82 12011 - Breath Alcohol Technician 17.80 12012 - Certified Occupational Therapist Assistant 28.64 12015 - Certified Physical Therapist Assistant 26.96 12020 - Dental Assistant 17.62 12025 - Dental Hygienist 34.53 12030 - EKG Technician 24.79 12035 - Electroneurodiagnostic Technologist 24.79 12040 - Emergency Medical Technician 14.82 12071 - Licensed Practical Nurse I 15.91 12072 - Licensed Practical Nurse II 17.80 12073 - Licensed Practical Nurse III 19.84 12100 - Medical Assistant 13.82 12130 - Medical Laboratory Technician 22.24 12160 - Medical Record Clerk 15.23 12190 - Medical Record Technician 17.03 12195 - Medical Transcriptionist 15.89 12210 - Nuclear Medicine Technologist 36.66 12221 - Nursing Assistant I 11.36 12222 - Nursing Assistant II 12.77 12223 - Nursing Assistant III 13.94 12224 - Nursing Assistant IV 15.65 12235 - Optical Dispenser 15.10 12236 - Optical Technician 15.91 12250 - Pharmacy Technician 15.80 12280 - Phlebotomist 13.35 12305 - Radiologic Technologist 24.62 12311 - Registered Nurse I 22.50

12312 - Registered Nurse II 27.53 12313 - Registered Nurse II Specialist 27.53 12314 - Registered Nurse III 33.30 12315 - Registered Nurse III Anesthetist 33.30 12316 - Registered Nurse IV 39.92 12317 - Scheduler (Drug and Alcohol Testing) 22.04 12320 - Substance Abuse Treatment Counselor 21.97 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.36 13012 - Exhibits Specialist II 22.75 13013 - Exhibits Specialist III 27.82 13041 - Illustrator I 18.36 13042 - Illustrator II 22.75 13043 - Illustrator III 27.82 13047 - Librarian 25.19 13050 - Library Aide/Clerk 11.58 13054 - Library Information Technology Systems 22.75 Administrator 13058 - Library Technician 16.84 13061 - Media Specialist I 16.41 13062 - Media Specialist II 18.36 13063 - Media Specialist III 20.47 13071 - Photographer I 16.41 13072 - Photographer II 18.36 13073 - Photographer III 22.75 13074 - Photographer IV 27.82 13075 - Photographer V 33.66 13090 - Technical Order Library Clerk 15.50 13110 - Video Teleconference Technician 16.41 14000 - Information Technology Occupations 14041 - Computer Operator I 15.59 14042 - Computer Operator II 17.44 14043 - Computer Operator III 19.44 14044 - Computer Operator IV 21.61 14045 - Computer Operator V 23.93 14071 - Computer Programmer I (see 1) 22.89 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.59 14160 - Personal Computer Support Technician 21.61 14170 - System Support Specialist 25.81 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.53 15020 - Aircrew Training Devices Instructor (Rated) 35.72 15030 - Air Crew Training Devices Instructor (Pilot) 42.82 15050 - Computer Based Training Specialist / Instructor 29.53

15060 - Educational Technologist 26.40 15070 - Flight Instructor (Pilot) 42.82 15080 - Graphic Artist 21.89 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.82 15086 - Maintenance Test Pilot Rotary Wing 42.82 15088 - Non-Maintenance Test/Co-Pilot 42.82 15090 - Technical Instructor 19.59 15095 - Technical Instructor/Course Developer 23.98 15110 - Test Proctor 15.80 15120 - Tutor 15.80 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.75 16030 - Counter Attendant 9.75 16040 - Dry Cleaner 12.32 16070 - Finisher Flatwork Machine 9.75 16090 - Presser Hand 9.75 16110 - Presser Machine Drycleaning 9.75 16130 - Presser Machine Shirts 9.75 16160 - Presser Machine Wearing Apparel Laundry 9.75 16190 - Sewing Machine Operator 13.10 16220 - Tailor 13.88 16250 - Washer Machine 10.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19.87 19040 - Tool And Die Maker 23.38 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.99 21030 - Material Coordinator 22.29 21040 - Material Expediter 22.29 21050 - Material Handling Laborer 15.06 21071 - Order Filler 13.16 21080 - Production Line Worker (Food Processing) 18.99 21110 - Shipping Packer 16.69 21130 - Shipping/Receiving Clerk 16.69 21140 - Store Worker I 14.36 21150 - Stock Clerk 19.10 21210 - Tools And Parts Attendant 18.99 21410 - Warehouse Specialist 18.99 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.78 23019 - Aircraft Logs and Records Technician 24.24 23021 - Aircraft Mechanic I 28.49 23022 - Aircraft Mechanic II 29.78 23023 - Aircraft Mechanic III 30.93 23040 - Aircraft Mechanic Helper 21.06 23050 - Aircraft Painter 27.22 23060 - Aircraft Servicer 24.24 23070 - Aircraft Survival Flight Equipment Technician 27.22 23080 - Aircraft Worker 25.77 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.77

I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.49

II

23110 - Appliance Mechanic 21.79 23120 - Bicycle Repairer 17.95 23125 - Cable Splicer 35.41 23130 - Carpenter Maintenance 21.09 23140 - Carpet Layer 20.40 23160 - Electrician Maintenance 25.01 23181 - Electronics Technician Maintenance I 26.10 23182 - Electronics Technician Maintenance II 27.64 23183 - Electronics Technician Maintenance III 29.00 23260 - Fabric Worker 19.27 23290 - Fire Alarm System Mechanic 22.55 23310 - Fire Extinguisher Repairer 17.95 23311 - Fuel Distribution System Mechanic 28.81 23312 - Fuel Distribution System Operator 21.67 23370 - General Maintenance Worker 17.73 23380 - Ground Support Equipment Mechanic 28.49 23381 - Ground Support Equipment Servicer 24.24 23382 - Ground Support Equipment Worker 25.77 23391 - Gunsmith I 17.95 23392 - Gunsmith II 20.51 23393 - Gunsmith III 22.76 23410 - Heating Ventilation And Air-Conditioning 23.79 Mechanic 23411 - Heating Ventilation And Air Contidioning 24.63 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.77 23440 - Heavy Equipment Operator 18.63 23460 - Instrument Mechanic 23.38 23465 - Laboratory/Shelter Mechanic 21.71 23470 - Laborer 15.06 23510 - Locksmith 21.71 23530 - Machinery Maintenance Mechanic 22.64 23550 - Machinist Maintenance 19.59 23580 - Maintenance Trades Helper 14.96 23591 - Metrology Technician I 23.81 23592 - Metrology Technician II 23.81 23593 - Metrology Technician III 24.76 23640 - Millwright 23.27 23710 - Office Appliance Repairer 21.55 23760 - Painter Maintenance 19.02 23790 - Pipefitter Maintenance 25.50 23810 - Plumber Maintenance 24.55 23820 - Pneudraulic Systems Mechanic 22.76 23850 - Rigger 22.76 23870 - Scale Mechanic 20.51 23890 - Sheet-Metal Worker Maintenance 23.81 23910 - Small Engine Mechanic 20.40

23931 - Telecommunications Mechanic I 27.17 23932 - Telecommunications Mechanic II 29.79 23950 - Telephone Lineman 28.26 23960 - Welder Combination Maintenance 19.18 23965 - Well Driller 24.81 23970 - Woodcraft Worker 22.76 23980 - Woodworker 17.95 24000 - Personal Needs Occupations 24550 - Case Manager 16.02 24570 - Child Care Attendant 10.42 24580 - Child Care Center Clerk 15.05 24610 - Chore Aide 12.03 24620 - Family Readiness And Support Services 16.02 Coordinator 24630 - Homemaker 17.66 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.45 25040 - Sewage Plant Operator 19.87 25070 - Stationary Engineer 23.45 25190 - Ventilation Equipment Tender 17.14 25210 - Water Treatment Plant Operator 19.87 27000 - Protective Service Occupations 27004 - Alarm Monitor 15.43 27007 - Baggage Inspector 14.15 27008 - Corrections Officer 16.89 27010 - Court Security Officer 17.84 27030 - Detection Dog Handler 15.83 27040 - Detention Officer 16.89 27070 - Firefighter 17.85 27101 - Guard I 14.15 27102 - Guard II 15.83 27131 - Police Officer I 19.19 27132 - Police Officer II 21.32 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.17 28042 - Carnival Equipment Repairer 12.77 28043 - Carnival Worker 9.72 28210 - Gate Attendant/Gate Tender 14.19 28310 - Lifeguard 12.47 28350 - Park Attendant (Aide) 15.88 28510 - Recreation Aide/Health Facility Attendant 11.96 28515 - Recreation Specialist 19.68 28630 - Sports Official 13.06 28690 - Swimming Pool Operator 16.85 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.52 29020 - Hatch Tender 24.52 29030 - Line Handler 24.52 29041 - Stevedore I 23.46 29042 - Stevedore II 25.96

30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.29 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.78 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.60 30021 - Archeological Technician I 17.12 30022 - Archeological Technician II 19.48 30023 - Archeological Technician III 23.42 30030 - Cartographic Technician 23.42 30040 - Civil Engineering Technician 20.62 30051 - Cryogenic Technician I 25.94 30052 - Cryogenic Technician II 28.64 30061 - Drafter/CAD Operator I 16.90 30062 - Drafter/CAD Operator II 18.90 30063 - Drafter/CAD Operator III 21.07 30064 - Drafter/CAD Operator IV 25.94 30081 - Engineering Technician I 16.89 30082 - Engineering Technician II 17.92 30083 - Engineering Technician III 20.05 30084 - Engineering Technician IV 24.85 30085 - Engineering Technician V 30.39 30086 - Engineering Technician VI 36.79 30090 - Environmental Technician 25.31 30095 - Evidence Control Specialist 23.42 30210 - Laboratory Technician 23.53 30221 - Latent Fingerprint Technician I 25.94 30222 - Latent Fingerprint Technician II 28.64 30240 - Mathematical Technician 23.42 30361 - Paralegal/Legal Assistant I 18.97 30362 - Paralegal/Legal Assistant II 23.52 30363 - Paralegal/Legal Assistant III 28.76 30364 - Paralegal/Legal Assistant IV 34.79 30375 - Petroleum Supply Specialist 28.64 30390 - Photo-Optics Technician 24.16 30395 - Radiation Control Technician 28.64 30461 - Technical Writer I 23.01 30462 - Technical Writer II 28.14 30463 - Technical Writer III 34.05 30491 - Unexploded Ordnance (UXO) Technician I 25.61 30492 - Unexploded Ordnance (UXO) Technician II 30.98 30493 - Unexploded Ordnance (UXO) Technician III 37.14 30494 - Unexploded (UXO) Safety Escort 25.61 30495 - Unexploded (UXO) Sweep Personnel 25.61 30501 - Weather Forecaster I 25.94 30502 - Weather Forecaster II 31.54 30620 - Weather Observer Combined Upper Air Or (see 2) 21.74 Surface Programs 30621 - Weather Observer Senior (see 2) 23.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.98 31020 - Bus Aide 12.14

31030 - Bus Driver 16.67 31043 - Driver Courier 14.75 31260 - Parking and Lot Attendant 12.04 31290 - Shuttle Bus Driver 15.82 31310 - Taxi Driver 13.86 31361 - Truckdriver Light 15.82 31362 - Truckdriver Medium 16.58 31363 - Truckdriver Heavy 19.37 31364 - Truckdriver Tractor-Trailer 19.37 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.11 99030 - Cashier 9.73 99050 - Desk Clerk 9.94 99095 - Embalmer 30.15 99130 - Flight Follower 25.61 99251 - Laboratory Animal Caretaker I 13.77 99252 - Laboratory Animal Caretaker II 14.86 99260 - Marketing Analyst 24.49 99310 - Mortician 30.15 99410 - Pest Controller 16.83 99510 - Photofinishing Worker 16.40 99710 - Recycling Laborer 15.56 99711 - Recycling Specialist 18.35 99730 - Refuse Collector 14.12 99810 - Sales Clerk 11.92 99820 - School Crossing Guard 12.01 99830 - Survey Party Chief 24.26 99831 - Surveying Aide 15.17 99832 - Surveying Technician 18.95 99840 - Vending Machine Attendant 17.57 99841 - Vending Machine Repairer 20.00 99842 - Vending Machine Repairer Helper 17.57

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of…