(9) ATTACHMENT 1 TO EXHIBIT B.pdf
PDF 75 KB Posted
- Solicitation number
- N3904024R0006
About this file
This combined synopsis and solicitation from the Department of the Navy seeks quotations for the fabrication of three types of steel disposal containers. Specifically, the solicitation requests two small shear block disposal containers, ten large shear block disposal containers, and one lead screw disposal container, all to be fabricated from ASTM A36 steel. Quotations are due by February 9, 2023, and the Navy intends to inspect containers at the mid-construction point and upon completion. The solicitation will be evaluated based on technical acceptability, past performance, and pricing, with technical capability rated as either acceptable or unacceptable. This requirement has been set aside solely for small businesses with fewer than 750 employees.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
N3904024C0006
PRINTED 13 APRIL 2021
ATTACHMENT 1 TO EXHIBIT B (DD FORM 1423)
CONTRACT/SOLICITATION
N3904024C0006
ITEM LARGE SHEAR BLOCK DISPOSAL
CONTAINER RF-2202
(DATE FOR ITEM) 11/08/2024
REQUIRED CERTIFICATION
A. CERTIFICATION SHALL BE SUPPLIED WITH EACH SHIPMENT OF MATERIAL.
CERTIFICATION (CERTIFICATE OF COMPLIANCE) SHALL BE SUPPLIED AS OUTLINED IN
PARAGRAPH B. THE VENDOR IS LIABLE FOR CONDUCTING ALL TESTS, ANALYSES,
INSPECTIONS, AND EXAMINATIONS, ETC., AS SPECIFIED BY THE CONTRACT AND
SPECIFICATIONS WHETHER CERTIFICATIONS ARE REQUIRED OR NOT.
CERTIFICATE OF COMPLIANCE (PROVIDE THE FOLLOWING VERBATIM STATEMENT OR
COMPLETE THE OPTIONAL FORM AT THE END OF THIS PART)
"I ATTEST ALL ITEMS FURNISHED ON THIS CONTRACT ARE IN FULL COMPLIANCE WITH
ALL CONTRACT REQUIREMENTS".
B. CERTIFICATION SHALL BE SUPPLIED PER THE FOLLOWING INSTRUCTIONS:
1. THE CERTIFICATION OF COMPLIANCE SHALL CONTAIN THE SIGNATURE AND TITLE OF
THE VENDOR OFFICIAL DESIGNATED RESPONSIBLE FOR QUALITY ASSURANCE.
2. THE MATERIAL IDENTIFICATION (E.G. LOT, BATCH, PART#, ETC.) SHALL BE INCLUDED
ON THE CERTIFICATE OF COMPLIANCE.
PRINTED 13 APRIL 2021
CONTRACT N3904024C0006
ATTACHMENT 1 TO EXHIBIT B (DD FORM 1423)
CERTIFICATE OF COMPLIANCE
COMPANY NAME
MATERIL IDENTIFICATION (COMPLETE APPLICABLE ITEMS)
PAGE
CONTRACT NO._____ ORDER NO. ______ ITEM NO. ______ _
NATIONAL/LOCAL STOCK NO. NSN/LSN
MANUFACTURER'S PART NO.
MANUFACTURER'S SERIAL NO.
DRAWING AND PIECE NO.
MANUFACTURER'S LOT/HEAT NOS. AS MARKED ON THE MATERIAL
ALL INSPECTIONS AND TEST REPORTS REQUIRED BY ATTACHMENT I TO EXHIBIT B (DD FORM
1423) FOR TRACEABILITY TO EACH CONTRACT ITEM MUST ACCOMPANY THIS SIGNED
STATEMENT:
THE INSPECTION AND TEST REPORTS (AS APPLICABLE) PROVIDED REPRESENT THE ACTUAL
ATTRIBUTES OF THE ITEMS FURNISHED ON THIS CONTRACT AND INDICATE FULL
COMPLIANCE WITH ALL CONTRACT REQUIREMENTS. I ATTEST ALL ITEMS FURNISHED ON
THIS CONTRACT ARE IN FULL COMPLIANCE WITH ALL CONTRACT REQUIREMENTS.
SIGNATURE DATE
QUALITY ASSURANCE OFFICIAL
File details come from the government source that posted it. Updated .