(7) ATTACHMENT 2.pdf

REQ DOC NO. -

CONTINUATION SHEET

3290V106

CONTRACT NO. -

ATTACHMENT 2

PAGE 1 OF 3N3904024C0006

NAME OF OFFER OR/CONTRACTOR

I ITEM#

SUPPLIES/SERVICES QTY U/1

LARGE SHEAR BLOCK DISPOSAL CONTAINER 10 EA

C. DESCRIPTION/SPECIFICATIONS

C.1 LARGE SHEAR BLOCK DISPOSAL CONTAINER RF-2202.

C.1.1 STEEL: ASTM-A36- 19

C.1.1 10 COMPLETE UNITS

C.1.2 MANUFACTURE IN ACCORDANCE WITH PNS 2370A0000388 REV

A. DRAWING IS ATTACHED.

C.2 PNSY PLANS TO INSPECT THE CONTAINERS AT AN APPROXIMATE

HALF WAY POINT OF CONSTRUCTION, DURING THE MAGNETIC

PARTICLE TESTING AND AT COMPLETION OF CONSTRUCTION.

C.2.1 CONTRACTOR SHALL NOTIFY PNSY WITH PROJECTED WORK

SCHEDULE. HALFWAY POINT OF CONSTRUCTION SHALL BE

DETERMINED BY THE CONTRACTOR AND PNSY AFTER AW ARD OF

CONTRACT.

C.3 PERFORM A VISUAL TEST PER A WS S 1.1/D.1. lM:2020; STRUCTURAL

WELDING CODE-STEEL; 24TH EDITION, APPROVED 19 DECEMBER

2019.

C.4 PERFORM MAGNETIC PARTICLE TESTING PER NAVSEA TECHNICAL

PUBLICATION T9074-AS-GIB-010/271 REV 1; REQUIREMENTS FOR

NONDESTUCTIVE TESTING METHODS AND MIL-STD-2035A;

NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA.

C.5

C.6

C.7

C.8

PERFORM LOAD/PROOF TEST ON SAFETY HOIST RING AND LIFTING

LUGS PER THE INSTRUCTIONS AND REQUIREMENTS OF THE

STATEMENT OF TESTS AND DRAWING. BOTH ARE ATTACHED.

GOVERNMENT INSPECTION IS REQUIRED DURING MANUFACTURE

AND PRIORTO SHIPMENT FROM THIS FACILITY. UPON RECEIPT OF

THIS ORDER, PROMPLTL Y NOTIFY THE REPRESENTATIVE OF THE

GOVERNMENT OFFICE WHO NORMALLY SERVES YOUR FACILITY SO

THAT APPROPRIATE PLANNING FOR GOVERNMENT INSPECTION CAN

BE ACCOMPLISHED. IN THE EVENT A REPRESENTATIVE OF THE

GOVERNMENT OFFICE CANNOT BE LOCATED, THE PURCHASING

AGENT SHOULD BE NOTIFIED PROMPLTL Y.

DATA REQUIREMENTS PER EXHIBIT B (DD-1423) & ATTACHMENT #2,

FOR SAFETY HOIST RING

C.7.1 CERTIFICATE OF COMPLIANCE; EXHIBIT B SEQUENCE A00l.

C.7.2 BEFORE VISUAL TEST CERTIFICATION, EXHIBIT B SEQUENCE

A002.

C.7.3 AFTER VISUAL TEST CERTIFICATION, EXHIBIT B SEQUENCE

A003.

C.7.4 BEFORE MAGNETIC PARTICLE TEST CERIFICATION, EXHIBIT B

SEQUENCE A004.

C.7.5 AFTER MAGNETIC PARTICLE TEST CERIFICATION, EXHIBIT B

SEQUENCE A005.

C.7.6 LOAD/PROOF TEST CERIFICATION, EXHIBIT B SEQUENCE A006.

DATA REQUIREMENTS PER EXHIBIT B (DD-1423) & ATTACHEMT #2,

FOR LIFTING LUGS.

C.8.1 CERTIFICATE OF COMPLIANCE; EXHIBIT A SEQUENCE A007.

C.8.2 BEFORE VISUAL TEST CERTIFICATION, EXHIBIT B SEQUENCE

A008.

C.8.3 AFTER VISUAL TEST CERTIFICATION, EXHIBIT B SEQUENCE

A009.

C.8.4 BEFORE MAGNETIC PARTICLE TEST CERTIFICATION, EXHIBIT

B SEQUENCE A0l 0.

C.8.5 AFTER MAGNETIC PARTICLE TEST CERTIFICATION, EXHIBIT B

SEQUENCE A0l 1.

C.8.6 LOAD/PROOF TEST CERIFICATION, EXHIBIT B SEQUENCE A012.

C.8.7 MATERIAL SAFETY DATA SHEETS, EXHIBIT B SEQUENCE A013.

D. PACKING/P ACKAGINGIMARK.INGS:

D.1 FOLLOWING SATISFACTORY COMPLETION OF LOAD/PROOF

TEST, PERMANENTLY MARK ITEMS AS REQUIRED PER DRAWING

AND STATEMENT OF REQUIRED TESTS.