B01 ATTACHMENT J09-085653 - Security Windows.pdf

HIS LODGE GRASS DENTAL, HIM, AND PHARMACY RENOVATION SECURITY WINDOWS

CONSTRUCTION DOCUMENTS 085653 - 1

SECTION 085653

SECURITY WINDOWS

1.1 SUMMARY

A. Section Includes:

1. Sliding, transaction security windows.

1.2 PREINSTALLATION MEETINGS

A. Preinstallation Conference: Conduct conference at Project site.

1.3 ACTION SUBMITTALS

A. Product Data: For each type of product.

B. Shop Drawings: Include plans, elevations, sections, and attachment details.

C. Samples: For frame members with stainless steel finishes.

1.4 INFORMATIONAL SUBMITTALS

A. Welding certificates.

B. Product test reports.

C. Sample warranty.

1.5 QUALITY ASSURANCE

A. Installer Qualifications: An authorized representative who is trained and approved by manufacturer for installation and maintenance of units required for this Project.

1.6 WARRANTY

A. Special Warranty: Manufacturer agrees to repair or replace security windows that fail in materials or workmanship within specified warranty period.

1. Warranty Period: Three years from date of Substantial Completion.

CONSTRUCTION DOCUMENTS 085653 - 2

PART 2 - PRODUCTS

2.1 PERFORMANCE REQUIREMENTS

A. Attack Resistance: Provide units identical to those tested for compliance with requirements indicated, and as follows:

1. Ballistics Resistance, UL 752: Listed and labeled as Level 3 in accordance with UL 752.

2. Forced-Entry Resistance, ASTM F1233: Class 2.0 in accordance with ASTM F1233.

2.2 SLIDING, TRANSACTION SECURITY WINDOWS

A. Provide sliding, transaction security windows.

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Armortex.

b. C.R. Laurence Co., Inc.

c. Creative Industries, Inc.

d. Other approve equal.

B. Configuration: One fixed-glazed panel and one horizontal-sliding glazed panel.

C. Operation: Manual open/manual closing.

D. Framing: Fabricate perimeter framing, mullions, and glazing stops from steel as follows:

1. Profile: Manufacturer's standard, with minimum face dimension indicated.

a. Minimum Face Dimension: 1-1/4 inches.

2. Depth: Manufacturer's standard.

E. Head and Jamb Framing: Designed for gasket glazing. Removable header access panel on secure side.

F. Sill: Stainless-steel channel frame designed for gasket glazing.

1. Shelf: Stainless steel, 12 inches deep by width of security window, with integral deal tray.

G. Sliding Window Hardware: Provide roller track designed for overhead support of manufacturer's standard carrier supporting horizontal-sliding glazed panel. Provide manufacturer's standard pull and lock with two keys for each horizontal-sliding glazed panel.

H. Glazing and Glazing Materials: Comply with requirements in Section 088853 "Security Glazing."

1. Glazing Meeting Edges: Polished glazing.

http://www.specagent.com/Lookup?ulid=12838 http://www.specagent.com/Lookup?uid=123457121586 http://www.specagent.com/Lookup?uid=123457121585 http://www.specagent.com/Lookup?uid=123457121595

CONSTRUCTION DOCUMENTS 085653 - 3

2.3 FABRICATION

A. General: Fabricate security windows to provide a complete system for assembly of components and anchorage of window units.

1. Provide units that are reglazable from the secure side without dismantling the attack side of framing.

2. Prepare security windows for field glazing unless preglazing at the factory is indicated.

B. Framing: Miter or cope corners the full depth of framing; weld and dress smooth.

1. Fabricate framing with manufacturer's standard, internal opaque armoring in thicknesses required for security windows to comply with ballistics-resistance performance indicated.

C. Glazing Stops: Finish glazing stops to match security window framing.

1. Attack-Side (Exterior) Glazing Stops: Welded or integral to framing.

2. Secure-Side (Interior) Glazing Stops: Removable, coordinated with glazing indicated.

D. Welding: Weld components to comply with referenced AWS standard. To greatest extent possible, weld before finishing and in concealed locations to minimize distortion or discoloration of finish. Remove weld spatter and welding oxides from exposed surfaces by descaling or grinding.

E. Preglazed Fabrication: Preglaze window units at factory, where required for applications indicated. Installation orientation of glazing to meet performance requirements. Comply with requirements in Section 088853 "Security Glazing."

2.4 STAINLESS STEEL FINISHES

A. Polished Finishes: Grind and polish surfaces to produce uniform finish, free of cross scratches.

1. Directional Satin Finish: ASTM A480/A480M, No. 4.

2.5 ACCESSORIES

A. Concealed Bolts: ASTM A307, Grade A unless otherwise indicated.

B. Welding Rods and Bare Electrodes: Select according to AWS specifications for metal alloy welded.

C. Glazing Strips and Weather Stripping: Manufacturer's standard replaceable components.

1. Sliding Type: AAMA 701/702, made of wool, polypropylene, or nylon woven pile with nylon-fabric backing.

D. Miscellaneous Glazing Materials: Provide material, size, and shape complying with requirements of glass manufacturers and with a proven record of compatibility with surfaces contacted in installation.

E. Anchors, Clips, and Window Accessories: Stainless steel; hot-dip, zinc-coated steel or iron, complying with ASTM B633; provide sufficient strength to withstand design pressures indicated.

CONSTRUCTION DOCUMENTS 085653 - 4

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine roughing-in for embedded and built-in anchors to verify actual locations of security window connections before security window installation.

B. Inspect built-in and cast-in anchor installations, before installing security windows, to verify that anchor installations comply with requirements. Prepare inspection reports.

3.2 INSTALLATION

A. Fastening to In-Place Construction: Provide anchorage devices and fasteners where necessary for securing security windows to in-place construction. Include threaded fasteners for inserts, security fasteners, and other connectors.

B. Glazed Framing: Provide gasket-glazed framing. Comply with installation requirements in Section 088853 "Security Glazing."

C. Removable Glazing Stops and Trim: Fasten components with security fasteners.

D. Fasteners: Install security windows using fasteners recommended by manufacturer with head style appropriate for installation requirements, strength, and finish of adjacent materials.

E. Sealants: Comply with requirements in Section 079200 "Joint Sealants" for installing sealants, fillers, and gaskets.

3.3 FIELD QUALITY CONTROL

A. Inspect installed products to verify compliance with requirements. Prepare inspection reports and indicate compliance with and deviations from the Contract Documents.

3.4 CLEANING AND PROTECTION

A. Lubricate sliding security window hardware.

B. Lubricate transaction drawer hardware.

3.5 DEMONSTRATION

A. Train Owner's maintenance personnel to adjust, operate, and maintain operable security windows.

END OF SECTION 085653

2. Depth: Manufacturer's standard.