MIL-STD-2073.pdf

Military Standard PDF 11 MB Posted

Attached to
STRAINER SEDIMENT
Solicitation number
70ZU0127Q20018
Issued by
Not on record

About this file

This is an informational guide prepared by the Defense Contract Management Agency (DCMA) in March 2014 that provides guidance on packaging and marking requirements for Department of Defense contracts and solicitations. The guide is not an official DoD adoption but serves as a familiarization resource for contractors and procurement personnel.

The guide covers packaging and marking standards applicable across multiple contract sections, including solicitation/contract forms, supplies and services, descriptions/specifications, packaging and marking, inspection and acceptance, deliveries/performance, contract clauses, and attachments. Key standards referenced include MIL-STD-2073-1E for military packaging, ASTM D-3951 for commercial packaging, MIL-STD-129 for military marking, and applicable modal regulations for hazardous materials (Title 49 CFR for land, IMO/IMDG for water, ICAO/IATA for commercial air, and AFMAN 24-204_IP for military air). The document details five basic military preservation methods (Methods 10, 20, 30, 40, and 50) with specific applications, containerization requirements at Level A and Level B protection, and comprehensive marking standards covering identification markings, bar codes, address markings, and special markings for shelf-life, project codes, fragile items, Method 50 packaging, expedited handling, hazardous materials, electrostatic discharge sensitive devices, and heat-treated wood packaging materials. Additional requirements address palletization standards per MIL-STD-147, RFID tagging per DFARS Clause 252.211-7006, quality assurance provisions, inspection procedures, and packaging requirement codes used in contracts to specify precise packaging specifications.

View the file

Other versions and copies of MIL-STD-2073

File Revision Posted Attached to
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROL-INDICATOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP UNIT, CENTRIFUGAL
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROLLER, MOTOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PASSAGE WAY FAN, EXHAUST
MIL-STD-2073.pdf Revision not stated STRAINER SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
Mil-Std 2073.pdf Revision not stated COUPLING, FLEX, CONE RING
Mil-Std 2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP UNIT, CENTER WITH MOTOR
Mil-Std 2073.pdf Revision not stated ODMS AIR CLEANER
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Revision not stated Single Leg Wire Rope Assembly
MIL-STD-2073.pdf Same revision and size as this file Revision not stated TUBE, METALLIC
MIL-STD-2073.pdf Revision not stated FILTER ELEMENT FLUID
MIL-STD-2073.pdf Revision not stated EXHAUST FASTENER KIT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated ANODE SUPPORT
MIL-STD-2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROL MONITOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated POWER SUPPLY, UNINTERRUPTIBLE
Show all 20

Who attaches MIL-STD-2073

Other files

File Type Posted
JOTFOC PBRO021 (2).pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .