MIL-STD-2073.pdf

Military Standard PDF 11 MB Posted

Attached to
CONTROL-INDICATOR
Solicitation number
70ZU0127P21013B00
Issued by
Not on record

About this file

Packaging and Marking Guide For DoD

This is an informational guide prepared by the Defense Contract Management Agency (DCMA) in March 2014 to familiarize contractors with Department of Defense packaging and marking requirements. The guide is not an official DoD adoption and does not replace contractual requirements, specifications, or regulations but serves as instructional reference material derived from current government packaging documents, pamphlets, and technical manuals.

The guide covers packaging requirement locations within solicitations and contracts (Sections A through J), hazardous materials handling requirements, and military packaging standards. For hazardous materials, items must be packaged in accordance with applicable modal regulations: Title 49 CFR for land transport, IMO/IMDG for water, ICAO/IATA for commercial air, and AFMAN 24-204_IP for military air (with cross-references to DLAI 4145.3, TM 38-250, NAVSUP PUB 505, and MCO P4030.19J). MIL-STD-129 marking is required when specified. For non-hazardous items, ASTM D-3951 (commercial packaging) may be appropriate for immediate-use items, not-mission-capable supply, depot consumption, and small parcel post shipments (CONUS only). Military packaging is governed by MIL-STD-2073-1E (with Change 1, effective 7 January 2011) for items requiring operational preservation, including those for wartime deployment, reusable containers, delivery-at-sea, and Defense Transportation and Distribution System entry with storage exceeding six months. The standard defines two military packing levels: Level A for severe worldwide conditions using overseas-type wood boxes or reusable containers, and Level B for moderate conditions using domestic wood crates, weather-resistant fiberboard, fast pack containers, fiber drums, paper, and shipping sacks. Five basic preservation methods are specified: Method 10 (physical protection), Method 20 (preservative coating), Method 30 (waterproof protection), Method 40 (watervaporproof protection), and Method 50 (watervaporproof with desiccant). Specific packaging methods (31-45, 51-52) are detailed with diagrams showing required components including preserved items, wrapping, cushioning, containers, and special materials such as heat-sealed bags and desiccants. Quality assurance provisions under Appendix G include visual preservation examinations, leakage testing using multiple techniques, and heat-sealed seam testing. The guide provides marking examples for unit, intermediate, and exterior containers using identification markings, bar codes, address markings (via Military Shipping Labels), and special markings for shelf-life, project codes, fragile items, Method 50 packaging, electrostatic discharge sensitivity, hazardous materials, and expedited handling. Additional topics include heat-treated wood packaging material requirements, palletization standards per MIL-STD-147, passive RFID tag requirements per DFARS Clause 252.211-7006, and references to key specifications including MIL-DTL-117 (heat-sealable bags), MIL-DTL-6060 (complex watervaporproof bags), MIL-STD-3010 (packaging material test procedures), and ASTM standards (D1974, D5168). The guide includes a sample MIL-STD-2073-1E worksheet and a Packaging Code Lookup Tool accessible online.

View the file

Other versions and copies of MIL-STD-2073

File Revision Posted Attached to
MIL-STD-2073.pdf Same revision and size as this file Revision not stated STRAINER SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP UNIT, CENTRIFUGAL
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROLLER, MOTOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PASSAGE WAY FAN, EXHAUST
MIL-STD-2073.pdf Revision not stated STRAINER SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
Mil-Std 2073.pdf Revision not stated COUPLING, FLEX, CONE RING
Mil-Std 2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP UNIT, CENTER WITH MOTOR
Mil-Std 2073.pdf Revision not stated ODMS AIR CLEANER
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Revision not stated Single Leg Wire Rope Assembly
MIL-STD-2073.pdf Same revision and size as this file Revision not stated TUBE, METALLIC
MIL-STD-2073.pdf Revision not stated FILTER ELEMENT FLUID
MIL-STD-2073.pdf Revision not stated EXHAUST FASTENER KIT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated ANODE SUPPORT
MIL-STD-2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROL MONITOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated POWER SUPPLY, UNINTERRUPTIBLE
Show all 20

Who attaches MIL-STD-2073

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .