MIL-STD-2073.pdf

Military Standard PDF 11 MB Posted

Attached to
PUMP UNIT, CENTRIFUGAL
Solicitation number
70ZU0127P21010B00
Issued by
Not on record

About this file

This is an informational guide for Department of Defense packaging and marking requirements that is not officially adopted by DoD but serves as an educational reference for contractors and personnel involved in federal contract packaging.

The guide provides comprehensive instruction on packaging standards applicable across solicitations and contracts, specifically addressing packaging and marking requirements typically located in Section D of federal contracts. It details five basic military preservation methods (Methods 10, 20, 30, 40, and 50) designed to protect items during shipment and storage based on severity of environmental exposure anticipated. Method 10 provides physical protection only; Method 20 adds preservative coating; Methods 30 and 40 offer waterproof and watervaporproof protection respectively; and Method 50 combines watervaporproof protection with desiccant and humidity indicators. The guide explains that hazardous materials must be packaged per Title 49 CFR (land), IMO/IMDG (water), ICAO/IATA (commercial air), and AFMAN 24-204_IP (military air), with markings per MIL-STD-129 and modal regulations taking precedence in case of conflicts. It references MIL-STD-2073-1E as the standard military packaging practice and includes detailed specifications for unit pack, intermediate, and exterior container markings; special markings for shelf-life, project codes, fragile items, Method 50 packaging, expedited handling, and hazardous materials; quality assurance provisions; and inspection requirements including visual examinations, leakage testing, and heat-sealed seam testing. Additionally, it addresses commercial packaging standards (ASTM D-3951), palletization standards (MIL-STD-147), heat-treated wood packaging material requirements, Radio Frequency Identification (RFID) application per DFARS Clause 252.211-7006, and provides sample worksheets for translating packaging requirement codes into specific packaging specifications.

View the file

Other versions and copies of MIL-STD-2073

File Revision Posted Attached to
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROLLER, MOTOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PASSAGE WAY FAN, EXHAUST
MIL-STD-2073.pdf Revision not stated STRAINER SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
Mil-Std 2073.pdf Revision not stated COUPLING, FLEX, CONE RING
Mil-Std 2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP UNIT, CENTER WITH MOTOR
Mil-Std 2073.pdf Revision not stated ODMS AIR CLEANER
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Revision not stated Single Leg Wire Rope Assembly
MIL-STD-2073.pdf Same revision and size as this file Revision not stated TUBE, METALLIC
MIL-STD-2073.pdf Revision not stated FILTER ELEMENT FLUID
MIL-STD-2073.pdf Revision not stated EXHAUST FASTENER KIT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated ANODE SUPPORT
MIL-STD-2073.pdf Revision not stated STRAINER, SEDIMENT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated GASKETS
MIL-STD-2073.pdf Same revision and size as this file Revision not stated CONTROL MONITOR
MIL-STD-2073.pdf Same revision and size as this file Revision not stated POWER SUPPLY, UNINTERRUPTIBLE
MIL-STD-2073.pdf Same revision and size as this file Revision not stated PUMP, AXIAL PISTONS & AXIAL PISTON PARTS KIT
MIL-STD-2073.pdf Same revision and size as this file Revision not stated TALKBACK AMPLIFIER
Show all 20

Who attaches MIL-STD-2073

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .