70Z08426QDL9400160002_US.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

70Z08426QDL9400160002

Summary of Changes

QUESTIONS

Q1. Would the USCG accept the Wing bid for this requirement?

A1. No, our bid is based solely on the Zodiac configuration. We are not offering the Wing Inflatable boat under this solicitation.

Q2. The SOW (Section 4) requires motors and kits within 90 days after award and boats, floors, and fuel accessories within 270 days after award. The Schedule of Pricing shows delivery by 31 December 2026 for all CLINs. Please confirm which controls.

A2. USCG Dive is willing to accept motors and kits within the 180-day timeline provided by the manufacturer.

Q3. The manufacturer's current production lead time for the Raider Model 50 motors is 180 days, and the sale requires an EPA National Security Exemption under 40 CFR 1068.225 that is filed after award using the contract number and agency endorsement. Will the Government accept a delivery period of up to 180 days after award for CLINs 0001 through 0004?

A3. We are willing to wait up to 180 days. We understand they need to manufacture them.

Q4. CLINs 0004 and 0009 are both described as shipping for Raider outboard motors and kits. Please confirm whether CLIN 0009 is intended to cover shipping for the Zodiac items (CLINs 0005 through 0008).

A4. Yes, we would like all shipping costs to be covered within this contract. We want 2 sets of everything sent directly to the three dive lockers. In Portsmouth, VA, San Diego, CA, and Honolulu, HI.

Q5. Will the government open the bid for the requirement to be "or equal" if the bidder provides a technical response with their quotation outlining their capability to meet or exceed the capability of the brand name specified craft?

A5. No.

Our quotation is submitted for the brand name Zodiac craft only. We are not requesting that the Government convert the requirement to "or equal."

Q6. The manufacturer's current lead time for the outboard motors and motor kits is 180 days rather than 90 days. Can the required delivery timeline be extended to 180 days?

A6. Yes

Q7. Will the full quantity be ordered all at once?

A7. Yes

Q8. Do prevailing wage requirements apply to this request?

A8. No, prevailing wage requirements (Davis-Bacon Act or Service Contract Labor Standards) do not apply to this procurement.

Our understanding is based on the fact that this is a supply contract for boats, and the solicitation does not contain any FAR 52.222-6 or FAR 52.222-41 clauses.

Q9. Are CLINS 00004 and 00009 duplicates, as both are listed as "Shipping for Raider Outboard Motors and Kits"?

A9. Our proposal assumes that all shipping costs are fully covered to deliver two complete sets to each RDL. We priced the requirement on that basis.

We request the Government's confirmation on whether these two CLINs are duplicates or if separate pricing is required.

Q10. Would the Government be open to receiving an alternate bid offering the Evinrude 55MFE, provided we clearly identify any differences from the stated Raider requirements and provide supporting technical information?

A10. No. We are not offering an alternate bid using the Evinrude 55MFE. Our proposal is based solely on the requirements as stated in the solicitation.

Q11. Please confirm which delivery requirement governs. Specifically, should offerors commit to December 31, 2026 for all items, or to the 90-day/270-day delivery schedule established in the SOW?

A11. We are not proposing an accelerated delivery date of December 31, 2026 for all items

Q12. Please confirm whether the listed manufacturer products and SKUs are mandatory and quotations must be for the exact specified items, or whether technically equivalent products from other manufacturers may be proposed if they meet or exceed all stated salient characteristics.

A12. Our quotation is based on the exact manufacturer products and SKUs listed in the solicitation. We are not proposing any alternate or "or equal" items.

Q13. Please confirm the intended equipment covered under each shipping line. In particular, please advise whether one shipping CLIN is intended for the Raider motors/kits and the other for the Zodiac CRRC boats and associated equipment.

A13. That is my assumption as the Zodiacs and the Engines will be from two separate manufactures and shipped directly to the individual RDLs.

Q14. Please confirm that offerors should use the quantities and units of issue exactly as shown in the Amendment 0001 Schedule of Pricing, or advise if a corrected schedule will be issued.

A14. We confirm that our pricing is based on using the exact quantities and units of issue as shown in the Amendment 0001 Schedule of Pricing.

Q15. Please provide the complete street addresses for each delivery location so that offerors can obtain accurate freight/shipping costs.

A15.

USCG Regional Dive Locker Pacific

400 Sand Island Pkwy

Honolulu, HI 96819

USCG Regional Dive Locker West

1022 Bay Marina Drive, Suite 106

National City, CA 91950

USCG Regional Dive Locker East

4000 Coast Guard Blvd

Portsmouth, VA 23703

Q16. Please also confirm that the required allocation is two (2) boats, two (2) engines, and the corresponding associated kits/accessories to each of the three locations.

A16. Yes

Q17. Please confirm what documentation or narrative must be included with the quotation to demonstrate technical acceptability under this factor. For example, should the offeror provide the proposed core-engine country of manufacture, identification of the U.S. remanufacturing facility, and a written confirmation of compliance with the stated remanufacturing requirement?

A17. Please clarify the minimum documentation required to demonstrate compliance with the remanufacturing requirement.

Our current proposal includes the proposed core-engine country of manufacture, identification of the U.S. remanufacturing facility, and a written confirmation of compliance. However, we would appreciate confirmation on whether this meets the government's expectations or if additional information is required.

Q18. Please confirm whether the Government requires a specific format for the Technical Section or whether an offeror-prepared compliance matrix/narrative addressing each of the four factors is acceptable.

A18. An offeror-prepared compliance matrix or narrative addressing each of the four factors is acceptable.

1). To provide answers to questions. Please page 2.

This concludes all changes.