Sol No. 70Z04026QSBPL0014 Amendment A00002.pdf
PDF 216 KB Posted
- Solicitation number
- 70Z04026QSBPL0014
About this file
This is an amendment to a federal solicitation for services on two U.S. Coast Guard vessels. Solicitation No. 70Z04026QSBPL0014 (A00002) removes the requirement for proof of Joint Certification Program (JCP) certification as a required document, but establishes JCP registration as a mandatory prerequisite for proposal submission.
All vendors planning to submit proposals must register with the U.S. Defense Logistics Agency Joint Certification Program to access Coast Guard drawings and critical technology documentation. Contractors must request drawings by September 22, 2026 at 2:00 PM Eastern Standard Time through the Contract Specialist; proposals from contractors who fail to register with JCP and request current drawings will not be accepted. The Performance of Work (POP) dates have been changed to: CG ANT SAGINAW RIVER (49422) from January 4, 2027 to February 12, 2027 for forty calendar days, and CG ANT DETROIT (49424) from February 22, 2027 to March 29, 2027 for thirty-six calendar days. Some specification references are export controlled and restricted to U.S. or Canadian contractors certified through JCP; access credentials will be provided by the Coast Guard's Technical Information Management Branch following vendor notification to Janet M. Delaney at Janet.M.Delaney@uscg.mil.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOLICITATION NO. 70Z04026QSBPL0014 (A00002)
The above referenced solicitation is hereby amended to remove the below in its entirety from the solicitation.
1. Under 52.212-2: Evaluation—Commercial Products and Commercial Services (Nov
2021)
REQUIRED DOCUMENTS No. 11. Proof of JCP Certification is removed.
(xvi) Please email to request drawings referenced in specification. Please indicate where you would like the drawings sent in your email. Currently all drawings are being submitted via e-mail. Please provide a valid e-mail address. Requests for drawings shall be received no later than 22 SEPTEMBER 2026 at 2:00pm Eastern Standard Time.
Instructions to access information marked as Critical Technology
All interested vendors planning to submit proposals for 70Z04026QSBPL0014 must register or be currently actively registered with the US Defense Logistics Agency in the Joint Certification
Program (JCP) to gain access to USCG drawings.
REQUEST FOR DRAWINGS: The last day to request drawings regarding this solicitation is
22 SEPTEMBER 2026 2:00pm EST. After this date, further requests may not be accepted due to time constraints. To request drawings, contact the Contract Specialist. All requests should identify the solicitation number. Some references listed in the Specification, under "Consolidated
List of References," are subject to Export Control limitations or have otherwise restricted distribution and have been deemed "limited access" and "export controlled" packages. In order to access these documents, vendors must be certified as a US or Canadian contractor by the Joint
Certification Program (JCP) administered by the Defense Logistic Information Service (DLIS).
Instructions and procedures for being certified by JCP can be found at https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/. Only those vendors that have current certification by JCP will be able to be granted explicit access to these packages by the
USCG.
Note: Once registration has been accomplished, please provide proof of registration to Janet M.
Delaney email: Janet.M.Delaney@uscg.mil, and that information will be forwarded to the
CG’s Publication Production & Distribution Section Technical Information Management Branch
(TIMB). Once TIMB confirm registration, there will be a PIN provided to Janet M Delaney and issued to each of the vendor’s POC/s. This PIN will be used to access References found under the Spec/SOW, Consolidated List of References. To bid on this solicitation any contractor, wanting to submit a bid, MUST be registered with JCP to obtain the current configuration of the vessel (configurations have changed). Any contractor who is not registered in the
JCP system and does NOT request drawings, the contractor’s proposal will not be accepted in accordance with the solicitation requirements. (CONTRACTORS MUST REQUEST
DRAWINGS THROUGH THE CONTRACT SPECIALIST.) If current drawings are not requested the contractor’s proposal will not be accepted.
2. The POP dates are hereby changed to read:
CG ANT SAGINAW RIVER (49422) POP: 1/4/27-2/12/27 for a total of forty (40) calendar Days
CG ANT DETROIT (49424) POP: 2/22/27-3/29/27 for a total of thirty-six (36) calendar days.
File details come from the government source that posted it. Updated .