USCG STA Oswego MBH Product Specification Sheet (revised 06-SEP-23).pdf

MOBLIE BOAT HOIST PRODUCT SPECIFICATION SHEET (revised 06-SEP-23)

The Government’s Requirement is for a Mobile Boat Hoist system, located at USCG Station Oswego, Oswego, New York.

USCG STA Oswego Specifications:

Hoist System: Each end of the hoisting strap (control) must be capable on moving independently.

Hoist System Travel speed: Proportional Hoist Controls

Wire rope: Must have a minimum rating of 110% of the Working Load Limit.

Slings: Sling Spacing must be adjustable. Slings must provide Spacing and configuration for the 45-RBM- 084-002 and 47B-MLB-801-002.

Drive System: All Wheel Drive System

Shall have a maximum Hoist height of 24’- Based on MBH Boat House

Shall have a maximum Hoist Width of 30’ and a minimum hoist width of 20’ 2”

Shall have a maximum Hoist Length of 25’. No minimum length as long as it meets the sling spacing measurements identified above.

Hoist Weight: Not to exceed 24000 lbs based on pier rating.

Working Load Limit: Minimum of 35 Metric Tons

Standard equipment: Vendor shall provide product sheet for hoist system they may choose to propose that can meet (or exceed) the standard equipment requirements identified here.

Wireless Remote control

Greaseable pivot trunnion with Zerk fittings

All greaseable sheaves/pins

Bolting flange in top beam

No sheet metal

O-ring face hydraulic fittings

316 Stainless steel hydraulic tubing

Inline hoist block sheaves

Powered sling adjustment

Independent hoisting strap control (capable of synchronization)

Load indicators

Use Corrosion resistant Coating System based on Federal, State, and Local environmental requirements

Weighted Chine pads for each sling

Shall have both drive lights and work lights designed to provide safe nighttime operating capabilities.

Overload alarm system installed in accordance with SFLC Technical Standard (TS) 583-4, which is included

Manufacturer shall provide maintenance manual and (2) operating manuals, drawings and a consumable parts list

Manufacturer shall provide a minimum of a 2-year parts and labor warranty, from the date of final inspection and acceptance

Manufacturer shall provide onsite maintenance training – Government expectation is for 2-3 days of training

Manufacturer shall provide onsite operator training – Government expectation is for 2-3 days of training.

Manufacturer: Hoist must be manufactured in the United States

Manufacturer shall provide 3rd party inspection of final assembly prior to acceptance, which includes 3 Static and 3 Dynamic Weight Tests - Resistance load fixture that tests full machine is acceptable. Due to environmental restrictions, water MAY NOT be allowed to be drained on-site. A USCG representative must be present to witness the 3rd party inspection.

Hoist shall be built to comply with all federal, state, and local standards

Manufacture shall provide reaction data provided with proposal

Hoist must be delivered and installed within 120 days after award

Manufacturer may request a pre-award site survey prior to proposal submission

Contractor is responsible for removing the old hoist and disposing of it properly in accordance with Federal, State and Local regulations. Current MBH Manufacturer: Marine Travel Lift, Model: 30AMO

Coast Guard Facilities to provide a staging area sufficient for delivery and installation of the hoist