IDS - Q_Rs 6.11.25.pdf
PDF 133 KB Posted
- Solicitation number
- 70RFPW25QW9000009
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ 70RFPW25QW9000009, Amendment 0001, installation of IDS in Riverside, CA
George E. Brown, Jr. Federal Building and United States Courthouse 3420-3470 12th Street Riverside, CA 92501 (Bldg. CA6951)
QUESTIONS AND RESPONSES
1. How old is the facility? 25 years old
25 years old
2. How much square footage is in the facility?
80,318 square feet
3. How stable is the power?
Yes, the power is stable, and it comes from Southern California Edison. They also have a backup generator.
4. Is there a dropped ceiling in all areas of installation?
There are drop and hard ceilings.
5. What type of walls are in the perimeter areas?
Sheetrock with metal studs.
6. Do we need to drill between the walls, to run our cable infrastructure?
Yes, you may need to drill between walls.
7. Do we need to use conduit? If yes, what do you estimate the total conduit footage will be?
Yes, refer to SOW Section E.3.4 and C.1.17. C.1.17 states that the contractor shall be responsible for estimating caving and conduit footing.
8. Are the door frames metal and concrete filled?
The door frames are metal.
Intrusion Detection:
• We understand there is no existing intrusion detection system, but what are the other security system types and brands at the courthouse, so we are aware of what may need to be integrated with the intrusion detection system?
Refer to RFP, SOW Section B.2, which states, “This SOW is for the purchase and installation of a new standalone, hardwired, Intrusion Detection System (IDS), main control alarm panel, programable keypads, door contacts, glass break sensors, and all additional equipment and appurtenances necessary for a fully functional IDS, located at the Riverside Federal Courthouse 3420-3470 12th Street Riverside, CA 952501. In other words, since the system is stand alone, it will not be necessary to integrate with any other systems.
• Do you have existing wiring at the locations where IDS sensors will be installed?
No. Refer to RFP, SOW Section B.1, which states, “There is currently no existing Intrusion Detection System installed.”
• Do you have existing door contacts?
No. Refer RFP, SOW Section B.1.
File details come from the government source that posted it. Updated .