Lot_2_Exhibit_10.pdf

Exhibit 10

Contractor-Provided Equipment

1. Uniform Requirements

The Contractor shall furnish uniform clothing items, as indicated below, to PSOs performing on this Contract. Badges, patches, and other approved devices worn on uniforms shall carry distinctive company markings and in compliance with applicable state and local laws. Note:

Regional Directors, or designee, may authorize adjustments to uniform clothing items to account for varying climate zones.

Uniform Components Description Color Minimum Qty

Body Armor

Minimum, NIJ Level IIA with Concealed Carrier

Black

Boots

Pair, Quarter

Cap

Baseball Style

Cap

Faux Fur Trooper Style

Double Magazine Case or

Speed Loader Case

Nylon, Compatible with Specified Weapon

Duty Belt “Keepers”

Nylon

Expandable or Straight Police Baton

With Holder

Glove and Microshield Pouch

Nylon, Slide on Belt Type, Holds Set of Single Use Disposable Gloves and One (1) Single Use Disposable Microshield

Gloves

Winter, Pair

Handcuff Case

Handcuffs and Keys

Meets NIJ 0307.01

Jacket

Winter, Patrol Type

Jacket

Nylon Windbreaker

Key Strap with Flap

Retention Holster Minimum, Level II, Nylon, Slide on Belt Type Black 1

Microshield

Single Use, Disposable 2

Nameplate

2-1/2” x 5/8” Metal Plate with Rounded Edges and 1/4” Lettering Identifying First Initial and Last Name

Gold Metal with Black Lettering

Necktie

Clip-on

Oleoresin Capsicum (OC)

2.0 ounce Non-Flammable Flip Top Safety Canister with Stream or Foam Spray Pattern (or as designated by State or local requirements)

Uniform Components Description Color Minimum Qty

Oleoresin Capsicum (OC) case

Nylon, Slide on Belt Type

Pistol belt

Nylon without Shoulder Strap

Shirt, long sleeve

Insignia, Shoulder Patch

Light Gray

Shirt, short sleeve

Insignia, Shoulder Patch

Light Gray

Trouser

All Season Weight

Flashlight w/holder

Portable Black 1

Optional/Regional Specific

2. Firearm and Ammunition Requirements

The Contractor shall have enough firearms in inventory, to provide each PSO, including part-time and reserve PSOs, with their own firearm. FPS has designated the following firearm(s) type authorized for use.

1. Caliber 9mm

.38 Special .40 S/W

9mm .357 SIG

The overall size shall not exceed 7.5” long, 5.5” high, and 1.5” wide and weigh no more than 30 oz.

excluding the magazine. The caliber authorized is 9MM and not any larger. The magazines (three for each pistol) shall hold a minimum of 10 rounds and not more than 17. The pistol must be able to be fired without a magazine inserted into the weapon. The magazine must fall free (unloaded) when the magazine catch is activated. The double action only trigger pull must not weigh more than 12 pounds and not less than 5 pounds. The pistol may be either a traditional double action only or a striker fired design.

The pistol shall have a dark corrosive resistant finish and must be must be capable of being fired without the manipulation of an external safety or cocking lever. Passively operated grip or trigger safeties are acceptable.

The normal function of the pistol shall be double action only. The pistol must be operable by a right or left-handed user. The use of a polymer-framed pistol is acceptable. There is not a requirement for an all-metal firearm.

All safeties must be internal or passive. An inertial interlocked firing pin will be the primary safety to positively prevent movement of the firing pin unless the trigger is pulled completely through its entire length of travel.

The sights must be drift adjustable and be luminous night sights, one (1) dot on the front sight, and two (2) dots on the rear sight, which appear as three (3) illuminated dots when the weapon is held at arm’s length.

The illuminated dots must not be visible when viewed from the muzzle end of the pistol. The color of the illuminated dots must be green. The illumination materials for the night sight must comply with Nuclear

Regulatory Commission standards.

The following pistols are recommended:

• Smith & Wesson M&P 9 MM; 5900 Series in DAO 9MM

• Glock 17 & 19 9MM

• SIGARMS Sigpro 9MM; P226 and P228 in 9MM DAO

• Steyr M Series 9MM

• Springfield Armory XD in 9MM

Ammunition type is authorized: 110- 147 grain Jacketed Hollow Points. (If local statutes permit)

Recommended Brands: Federal, Speer, Winchester, Remington

2. Caliber .38 SPECIAL

The overall size shall not exceed 10.5” long, 5.5” high, and 1.55” wide and weigh no more than 42 oz. or less than 35 oz empty with a 4 inch non-ported, semi or fully shrouded (lugged) barrel. The pistol may be capable of firing either 38 Special +P or .357 Magnum cartridges although the duty caliber authorized is

.38 Special +P. The cylinder shall hold 6 rounds and be opened with the manipulation of just one release.

The double action trigger pull must not weigh more than 12 pounds and not less than 5 pounds.

The pistol shall have a blued or stainless steel finish and must be capable of being fired without the manipulation of an external safety. The normal function of the pistol shall be double action with the capability of being fired in a single action mode. The pistol must be operable by a right or left-handed user. With the exception of grips and small internal parts, it shall be an all-metal firearm.

All safeties must be internal and passive. A transfer bar type mechanism will be the primary safety to positively prevent contact between the hammer and firing pin or hammer and cartridge primer unless the trigger is pulled completely through its entire length of travel.

The sights must be fixed front and fixed, drift or fully adjustable rear.

The following pistols are recommended:

• Smith & Wesson Model 686 K or L frame

• Taurus Model 82 or 65

• Ruger GP 100 Series

Ammunition type authorized: 110 – 135 grain +P rated Jacketed Hollow Point. (If local statutes permit)

3. Caliber .40 S&W

The overall size shall not exceed 7.5” long, 5.5” high, and 1.5” wide and weigh no more than 30 oz.

excluding the magazine. The caliber authorized is .40 S&W and not any larger. The magazines (three for each pistol) shall hold a minimum of 10 rounds and not more than 15. The pistol must be able to be fired without a magazine inserted into the weapon. The magazine must fall free (unloaded) when the magazine catch is activated. The double action only trigger pull must not weigh more than 12 pounds and not less than 5 pounds. The pistol may be either a traditional double action only or a striker fired design.

The pistol shall have a dark corrosive resistant finish and must be must be capable of being fired without the manipulation of an external safety or cocking lever. Passively operated grip or trigger safeties are acceptable.

The normal function of the pistol shall be double action only. The pistol must be operable by a right or left-handed user. The use of a polymer-framed pistol is acceptable. There is not a requirement for an all-metal firearm.

All safeties must be internal or passive. An inertial interlocked firing pin will be the primary safety to positively prevent movement of the firing pin unless the trigger is pulled completely through its entire length of travel.

The sights must be drift adjustable and be luminous night sights, one (1) dot on the front sight, and two (2) dots on the rear sight, which appear as three (3) illuminated dots when the weapon is held at arm’s length.

The illuminated dots must not be visible when viewed from the muzzle end of the pistol. The color of the illuminated dots must be green. The illumination materials for the night sight must comply with Nuclear

Regulatory Commission standards.

• Smith & Wesson M&P .40 Cal.

• Glock 22 & 23 .40 Cal.

• SIGARMS Sigpro .40 Cal.; P226 and P229

• Steyr M Series .40 Cal.

• Springfield Armory XD in .40 Cal.

• H&K USP (Variant 7 DAO) .40 Cal.

Ammunition type authorized: 155-180 grain Jacketed Hollow Point

4. Caliber 357 SIG

The overall size shall not exceed 7.5” long, 5.5” high, and 1.5” wide and weigh no more than 30 oz. excluding the magazine. The caliber authorized is .357 SIG. The magazines (three for each pistol) shall hold a minimum of 10 rounds and not more than 15. The pistol must be able to be fired without a magazine inserted into the weapon. The magazine must fall free (unloaded) when the magazine catch is activated. The double action only trigger pull must not weigh more than 12 pounds and not less than 5 pounds. The pistol may be either a traditional double action only or a striker fired design.

The pistol shall have a dark corrosive resistant finish and must be must be capable of being fired without the manipulation of an external safety or cocking lever. Passively operated grip or trigger safeties are acceptable. The normal function of the pistol shall be double action only. The pistol must be operable by a right or left-handed user. The use of a polymer-framed pistol is acceptable. There is not a requirement for an all-metal firearm.

All safeties must be internal or passive. An inertial interlocked firing pin will be the primary safety to positively prevent movement of the firing pin unless the trigger is pulled completely through its entire length of travel.

The sights must be drift adjustable and be luminous night sights, one (1) dot on the front sight, and two (2) dots on the rear sight, which appear as three (3) illuminated dots when the weapon is held at arm’s length. The illuminated dots must not be visible when viewed from the muzzle end of the pistol. The color of the illuminated dots must be green. The illumination materials for the night sight must comply with Nuclear Regulatory Commission standards.

• Smith & Wesson M&P .357 SIG

• Glock 31 & 32

• SIGARMS Sigpro or P229 in .357 SIG

• Steyr M Series in .357 SIG

• Springfield Armory XD in .357 SIG

Ammunition type authorized: 125 grain Jacketed Hollow Point. (If local statutes permit)

Pump-action shotgun, when applicable

The only caliber authorized is 12 gauge. The overall size shall not exceed 42” long and weigh no more than 9 lbs. (empty). The length of the barrel will be no shorter than 18” and no longer than 20”.

It must have a dark corrosive resistant finish with black synthetic stock and fore-end. A fore-end with integral light is allowed. The magazine tube will hold a minimum of 5 rounds of ammunition (2 ¾” shells) and not more than 7. The shotgun will use a locked breech manually operated system that functions on the pump action principle.

It will have a single action only trigger system with a cross bolt manual safety. The sights can be rifle, bead, adjustable open, or ghost ring – they can be luminous tritium night sights. If they are luminous tritium night sights then they must comply with Nuclear Regulatory Commission standards.

The following shotgun is recommended:

• Remington 870

Ammunition type authorized:

• 9 pellet 00 Buckshot

Recommended Brands:

• Winchester

• Federal

• Remington

3. Personal Protective Equipment Requirement

The Contractor shall maintain a stock of the following Personal Protective Equipment (PPE) items for each PSO, post, and location covered by this contract and in quantities sufficient for a two-week period. The Contractor shall maintain all equipment in a ready and usable condition and replenish stock as necessary to ensure a two-week supply is available at all times.

Item Description QTY

Eyewear Blood and Air Borne Protection * Gloves Medical Examination Gloves *

Hand Sanitizer Alcohol-Based * N95 Mask Filtering Face Piece Respirator *

Microshield Single Use, Disposable *

* As appropriate to supply each security officer this equipment for at least two weeks in performance of their duties. Contractor shall replace disposable continuous wear items such as masks and gloves over course of a PSOs shift as recommended by manufacturer to ensure maximum effectiveness of the item.

3. Communications Equipment Requirement.

The Contractor shall provide, maintain, and supplement, as may be necessary at the site identified above, the following number(s) of radios/cellular phones and described associated equipment/ to equip each security officer on post a method to communicate with FPS.

Type of Equipment Qty

Radio, portable, handy-talkie, four (4) watts, with Helifex antenna 28 Total

Charger, rapid rate, portable 28 Total

Charger, rapid rate, desktop 0

Battery, rapid rate 28 Total

Standard carrying case 0

Base Station 0

Cellular telephone 7Total

Cellular telephone charger 7 Total

Cellular telephone holder 0 Total

Licenses and Frequencies: The Contractor shall apply for an FCC license and authorization to operate in frequencies specified by the Government. Where necessary, the COR shall issue a letter of authorization, identifying the Contractor as having a need to communicate over a frequency or frequencies assigned to an agency of the Federal Government.

Normal, Emergency and Continuous Communications: All two-way portable radio units must have the capability of transmitting and receiving clear and concise vocal transmissions between the security officer, supervisory personnel and the Contractor's base station.

The cellular phones must have a telephone number with the local area code of the location of the post. The cellular phone shall have the capability to receive and make calls without restrictions for having the capability for two-way communications between FPS, the Contractor, and the security officer personnel assigned to this Contract.

The Contractor shall provide a listing of radio(s) and associated equipment used on this Contract to the COR prior to standing post. The Contractor shall provide a listing of cellular telephone numbers and the associated posts used on this Contract to the COR prior to standing post.

4. Contractor Vehicle Requirement

The Contractor shall furnish vehicle(s), as indicated below, for patrol, to transport supervisors in the course of supervision duties, or emergency response, as may be necessary. The vehicles shall carry distinctive markings of the company. The vehicles shall be available at all times during the life of the contract.

The Contractor shall immediately replace a vehicle must be removed from operation for any reason. It is the Contractor's responsibility to register, insure, and provide proper maintenance for the vehicles. The vehicles shall have the following equipment:

• Rotational emergency roof light in compliance with applicable state and local laws

• One (1) 10 – 15 lb. portable dry chemical, ABC extinguisher, installed and maintained in accordance with NFPA 10, Portable Fire Extinguishers

• One (1) conventional, universal first aid kit that contains an Airway pack, Cling bandages, and a minimum of two bite sticks

Vehicle Type

(Sedan/Truck/Segway/Bicycle etc) Estimated use mi/hrs per day

Vehicle Type (Sedan/Truck/Segway/Bicycle etc)

Estimated use mi/hrs per day

NO VEHICLE REQUIRED

4. Supplementary Equipment

The Contractor shall furnish the following supplemental equipment items for each PSO, post, or location as indicated.

Item Description Qty

Weapons Safe 1 per site

Clearing Barrel 1 per site