7_DI SESS 81839.pdf
Data Item Description PDF 48 KB Posted
- Solicitation number
- N6426723Q5099
About this file
This document contains a data item description for a Professional Engineering Analysis Report required under a federal contract. The report must follow the contractor's format and include a title page with contract and project details as well as sections for an introduction, design standards, structural analysis, conclusions, and certification by a professional engineer.
The related federal contract opportunity is a solicitation from the Department of the Navy to conduct a non-destructive concrete survey at Marine Corps Base Hawaii Kaneohe Bay. Offerors are required to provide engineering analysis reports per the specifications in the data item description included.
View the file
Other versions and copies of DI-SESS-81839
| File | Revision | Posted | Attached to |
|---|---|---|---|
| 0618-04 Platform DID DISESS81839 PE Analysis Report.pdf | Revision not stated | Platform |
Who attaches DI-SESS-81839
| Agency | Files |
|---|---|
| Department of the Navy Naval Sea Systems Command | 2 |
Other files
| File | Type | Posted |
|---|---|---|
| N6426723Q5099 Amendment 4.pdf | ||
| N6426723Q5099 amend 3.pdf | ||
| N6426723Q5099 amend 2.pdf | ||
| 14_N6426723Q5099_Amendment1.pdf | ||
| WD 2015-5689-Hawaii.pdf | ||
| 7_CDRL- D001 Final-_Redacted.pdf | ||
| N6426723Q5099 RFQ.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: PROFESSIONAL ENGINEERING (PE) ANALYSIS REPORT
Number: DI-SESS-81839
Approval Date: 20111108
AMSC Number: N9214 Limitation:
DTIC Applicable: N/A GIDEP Applicable: N?A Office of Primary Responsibility: SH/NSWCFT31 Applicable Forms: N/A
Use/Relationship: The Professional Engineering (PE) Analysis Report provides results of technical studies, and of structural analysis performed. The report is certified and stamped by a professional engineer (PE) and provides assurance to the government that all of the specified requirements have been met.
This data item description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
Requirements:
1. Format. The Professional Engineering Analysis Report shall be in the Contractor’s format.
2. Content. The report shall contain a title page.
2.1 The title page shall specify the following:
a. contract number,
b. delivery order,
c. project name,
d. purchase description title, and
e. task number.
2.2 The report shall contain an ”Introduction” with a brief
description of the analysis performed.
2.3 The report shall contain a “Design Standard” section and
shall identify all government and industry specifications and standards used for design and loading.
2.4 The report shall contain a “Structural Analysis” section and a brief statement of the results obtained from the structural analysis.
2.5 The report shall contain a “Conclusion” of the condensed
Source: http://assist.dla.mil -- Downloaded: 2023-08-23T18:04Z
Check the source to verify that this is the current version before use.
DI-SESS-81839
technical substantiations.
2.6 The report shall contain “PE Certification” information
specifying the following:
a. PE contact information
b. State registered professional license stamp with expiration date,
c. PE signature and date.
3. End of DI-SESS-81839.
Source: http://assist.dla.mil -- Downloaded: 2023-08-23T18:04Z
Check the source to verify that this is the current version before use.
| 1. Format. The Professional Engineering Analysis Report shall |
| be in the Contractor’s format. |
| 2. Content. The report shall contain a title page. |
| 2.1 The title page shall specify the following: |
| a. contract number, |
| b. delivery order, |
| c. project name, |
| d. purchase description title, and |
| e. task number. |
| 2.2 The report shall contain an ”Introduction” with a brief |
| description of the analysis performed. |
| 2.3 The report shall contain a “Design Standard” section and shall identify all government and industry specifications and standards used for design and loading. |
| 2.4 The report shall contain a “Structural Analysis” section and a brief statement of the results obtained from the structural analysis. |
| 2.5 The report shall contain a “Conclusion” of the condensed |
| technical substantiations. |
| 2.6 The report shall contain “PE Certification” information |
| specifying the following: |
| a. PE contact information |
| b. State registered professional license stamp with expiration date, |
| c. PE signature and date. |
| 3. End of DI-SESS-81839. |
File details come from the government source that posted it. Updated .