0618-04 Platform DID DISESS81839 PE Analysis Report.pdf
PDF 29 KB Posted
- Attached to
- Platform Federal contract opportunity
- Solicitation number
- N0017824Q6892
About this file
This document is a Data Item Description (DID) for a Professional Engineering (PE) Analysis Report. The report provides the results of technical studies and structural analysis performed, certified and stamped by a professional engineer. The report must include a title page, introduction, design standards, structural analysis results, conclusions, and PE certification information.
The related federal contract opportunity is a Request for Quotation (RFQ) issued by the Naval Sea Systems Command to procure a raised platform. The anticipated solicitation closing date is July 17, 2024. The requirement is eligible for small business set-aside, and material must be TAA compliant. Award will be made based on Lowest Price Technically Acceptable. Offerors must be registered in SAM and may submit a capability statement, proposal, or quotation. Quotes are due by July 17, 2024 at 12:00 p.m. EST.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 0618-04 - Platform- CDRL A002 Signed- Redacted.pdf | ||
| 0618-04 Platform DID QCIC80510 Install Spec.pdf | ||
| N0017824Q6892.pdf | ||
| Combined Synopsis.docx | DOCX document | |
| 0618-04 - Platform- CDRL A001 Signed- Redacted.pdf | ||
| 0618-04 - Platform Platform Drawing.pdf | ||
| 0618-04 - Platform- SOW Rev2- Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: PROFESSIONAL ENGINEERING (PE) ANALYSIS REPORT
Number: DI-SESS-81839
Approval Date: 20111108
AMSC Number: N9214 Limitation:
DTIC Applicable: N/A GIDEP Applicable: N?A Office of Primary Responsibility: SH/NSWCFT31 Applicable Forms: N/A
Use/Relationship: The Professional Engineering (PE) Analysis Report provides results of technical studies, and of structural analysis performed. The report is certified and stamped by a professional engineer (PE) and provides assurance to the government that all of the specified requirements have been met.
This data item description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
Requirements:
1. Format. The Professional Engineering Analysis Report shall be in the Contractor’s format.
2. Content. The report shall contain a title page.
2.1 The title page shall specify the following:
a. contract number,
b. delivery order,
c. project name,
d. purchase description title, and
e. task number.
2.2 The report shall contain an ”Introduction” with a brief
description of the analysis performed.
2.3 The report shall contain a “Design Standard” section and
shall identify all government and industry specifications and standards used for design and loading.
2.4 The report shall contain a “Structural Analysis” section and a brief statement of the results obtained from the structural analysis.
2.5 The report shall contain a “Conclusion” of the condensed
Source: https://assist.dla.mil -- Downloaded: 2024-06-06T16:49Z Check the source to verify that this is the current version before use.
DI-SESS-81839
technical substantiations.
2.6 The report shall contain “PE Certification” information
specifying the following:
a. PE contact information
b. State registered professional license stamp with expiration date,
c. PE signature and date.
3. End of DI-SESS-81839.
Source: https://assist.dla.mil -- Downloaded: 2024-06-06T16:49Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .