SolicitationDocument-697DCK-18-R-00013.pdf

SOLICITATION, OFFER

AND AWARD

2. TYPE OF SOLICITATION

6. PROJECT NO. 4. CONTRACT NO. 5. REQUISITION/

PAGE OF PAGES

7. ISSUED BY CODE 8. ADDRESS OFFER TO

SOLICITATION

(Construction, Alteration, or Repair)

1. SOLICITATION NO. 3. DATE ISSUED

IMPORTANT -- The "offer" section on the reverse must be fully completed by offeror.

9.

INFORMATION

A. NAME B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

NOTE: In sealed bid solicitations "offer" and "offeror" means "bid" and "bidder"

CALL:

FOR

SEALED BID (IFB)

NEGOTIATED BID (RFP)

AAQ-510 EASTERN SVC CTR ACQUISITION

FAA Southern Regional Office, Room 400 FAA Southern Regional Office 1701 Columbia Ave.

AAQ510-AFN

College Park GA 30337

Michael J. Eadon

Email: Michael.Eadon@faa.gov

Michael Eadon 404-788-8528 x

10/26/2017 59

PURCHASE REQUEST NO.

697DCK-18-R-00013

10. THE CONTRACT AUTHORITY REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date)

This solicitation is a consolidated construction requirement for tower replacement and re-cabling projects at Jacksonville, Florida in accordance with SOW's, specifications and drawings. See Section "J" for list of attachments, Section "L" for proposal submittal requirements and Section "M" for proposal evaluation information. Information pertaining to requirement for site visit and the Scheduled

Site Visit (SSV) can be located in Section L.

To be considered qualified and responsive all items listed in Section "L" must be submitted. Offer(s) will be considered using the evaluation approach and factors in

Section “M” of this solicitation document. Participants are encouraged to periodically check the FAA Contracting Opportunities (FAACO) website for postings for amendments to this solicitations. Interested and capable contractors are also encouraged to participate in this opportunity regardless of business tier level considering that price fair and reasonableness will be a determining factor for award.

11. The Contractor shall begin performance within

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

award notice to proceed. The performance period is mandatory, negotiable. (See ________________________________________________ .)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and is not required.is, B. An offer guarantee

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

(date). If this is a sealed bid solicitation, offers must be publicly opened at that time . Sealed envelopes containing offers shall be marked to show the offeror's name and address. The solicitation number, and the date and time offers are due.

D. Offers providing less than

12B. CALENDAR DAYSYES NO

(If "YES", indicate within how many calendar days after award in item 12B.)

10 180 calendar days and complete it within ________________ ________________ calendar days after receiving

1 1700

11/28/2017 x x x x copies to perform the work required are due at the place specified in Item 8 by _____________ ___________________ (hour) local time calendar days for Contract Authority acceptance after the date offers are due will not be considered and will _________________ be rejected.

Michael Eadon Highlight

Michael Eadon Highlight

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Contract Authority in writing within ____________________ calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in item 13D. Failure to insert any number means the offeror accepts the minimum in item 13D.)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than item 14)

CODE FACILITY CODE

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

OFFER (MUST BE FULLY COMPLETED BY OFFEROR)

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Contract Authority)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this document and return (Contractor is not required to sign this document.)

Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Contract Authority solicitation and your offer, and (b) this contract award.

No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print) 31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE 30C. DATE 31B. CONTRACT AUTHORITY 31C. AWARD DATE

BY

2PAGE OF

AAQ-510 EASTERN SVC CTR ACQUISITION

FAA Southern Regional Office, Room 400

FAA Southern Regional Office 1701 Columbia Ave.

AAQ510-AFN

College Park GA 30337

Michael J. Eadon

28. NEGOTIATED AGREEMENT 29. AWARD

Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.)

Continued...

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 59

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-18-R-00013

(A) (B) (C) (D) (E) (F)

Period of Performance: 01/01/2018 to 08/31/2018

0001 IGF::OT::IGF - Replace two (2) 80 Ft

Communication Antenna Towers with two (2) 80 Ft

Free-Standing Communication Antenna Towers @ JAX

RCAG, 4040A.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZM

76942AZM

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322181024 US

Mark For:

JON # 60112 / JAMES BALDWIN

0002 IGF::OT::IGF - Replace two (2) 80 Ft

Communication Antenna Towers with two (2) 80 Ft

Free-Standing Communication Antenna Towers @ JAX

RCAG, 4040B.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZM

76942AZM

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322181024 US

Mark For:

JON # 60112 / JAMES BALDWIN

0003 IGF::OT::IGF - Re-cable three (3) 40 Ft

Communication Antenna Towers @ JAXF RTR, 4040A.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZM

76942AZM

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322181024 US

Continued ...

4 59

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-18-R-00013

(A) (B) (C) (D) (E) (F)

Mark For:

JON # 60114 / JAMES BALDWIN

0004 IGF::OT::IGF - Re-cable three (3) 40 Ft

Communication Antenna Towers @ JAXF RTR, 4040B.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZM

76942AZM

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322181024 US

Mark For:

JON # 60114 / JAMES BALDWIN

0005 IGF::OT::IGF - Re-cable three (3) 40 Ft

Communication Antenna Towers @ JAXF RTR, 4040C.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZM

76942AZM

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322181024 US

Mark For:

JON # 60114 / JAMES BALDWIN

0006 IGF::OT::IGF - Install one (1) tower and cabling three (3) towers - CFE (tower 1-4).

Electronic & IT: 03

Delivery: 60 Days After Award

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0007 IGF::OT::IGF - Install one (1) tower and cabling three (3) towers - CFE (tower 1-4).

Electronic & IT: 03

5 59

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-18-R-00013

(A) (B) (C) (D) (E) (F)

Delivery: 60 Days After Award

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0008 IGF::OT::IGF - Install three (3) new towers, UIS

(tower 2).

Electronic & IT: 03

Delivery: 60 Days After Award

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0009 IGF::OT::IGF - Install three (3) new towers, UIS

(tower 3).

Electronic & IT: 03

Delivery: 60 Days After Award

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0010 IGF::OT::IGF - Install three (3) new towers, UIS

(tower 4).

Electronic & IT: 03

Delivery: 60 Days After Award

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0011 IGF::OT::IGF - Install two (2) new towers and cabling (2) towers, CFE.

Electronic & IT: 03

6 59

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-18-R-00013

(A) (B) (C) (D) (E) (F)

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0012 IGF::OT::IGF - Install two (2) new towers and cabling (2) towers, CFE.

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0013 IGF::OT::IGF - Install two (2) new towers and cabling (2) towers, CFE (tower 1).

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0014 IGF::OT::IGF - Install two (2) new towers, UIS

(tower 3).

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

0015 IGF::OT::IGF - Install two (2) new towers, UIS

(tower 4).

7 59

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

697DCK-18-R-00013

(A) (B) (C) (D) (E) (F)

Electronic & IT: 03

Delivery: 60 Days After Notice to Proceed

Delivery Location Code: 76942AZF

76942AZF

6942AZ DOT FAA

FAA BUILDING

14400 WHIRLWIND AVE

JACKSONVILLE FL 322180000 US

Section A - Solicitation/Contract Form

Clauses

Section B - Supplies or Services/Prices

Section B - Schedule

This is a construction, firm fixed price (FFP), competitive procurement with a tiered evaluation source selection method for: Replacement and Re-cabling of Communication Towers (Combined Projects), Jacksonville, FL.

The main North American Industry Classification System (NAICS) size standard code for this requirement is 237130, Power and Communication Line and Related Structures Construction, with a small business size standard of $36.5 Million. The period of performance is approximately 180 calendar days after the issuance of a Notice to Proceed (NTP). The total estimated price range for this combined requirement is between $500K - $700K.

The Contractor price must include all costs related to (a) direct and indirect labor, fringe benefits, overhead, G&A expenses, profit, material, equipment, other direct costs, insurance, freight, handling, transportation, (b) federal, state, and local taxes, (c) all applicable fees permits, licenses, and (d) any miscellaneous charges.

Replacement and Re-cabling of Communication Towers, Jacksonville, FL

DESCRIPTION AND PROPOSED PRICINGS

0001. Replace two (2) 80 ft Communication Antenna Towers with two (2) 80 ft Free-Standing Communication Antenna Towers @ JAX RCAG - 4040A (REQ#: ES-17-01321)

Price: __________________

0002. Replace two (2) 80 ft Communication Antenna Towers with two (2) 80 ft Free-Standing Communication Antenna Towers @ JAX RCAG - 4040B (REQ#: ES-17-01321)

Price: ___________________

0003. Re-cable three (3) 40 ft Communication Antenna Towers @ JAXF RTR - 4040A (REQ#: ES-17-01322)

Price: ___________________

0004. Re-cable three (3) 40 ft Communication Antenna Towers @ JAXF RTR - 4040B (REQ#: ES-17-01322)

Price: ___________________

0005. Re-cable three (3) 40 ft Communication Antenna Towers @ JAXF RTR - 4040C (REQ#: ES-17-01322)

Price: ____________________

0006. Installation of one (1) and cabling of three (3) Communication Antenna Towers - CFE (Towers 1-4) -

(REQ#: ES-17-02592)

Price: ____________________

0007. Installation of one (1) and cabling of three (3) Communication Antenna Towers - CFE (Towers 1-4) -

(REQ#: ES-17-02592)

Price: ____________________

0008. Installation of three (3) Communication Antenna Towers - UIS (Tower 2) - (REQ#: ES-17-02592)

Price: ____________________

0009. Installation of three (3) Communication Antenna Towers - UIS (Tower 3) - (REQ#: ES-17-02592)

Price: ____________________

0010. Installation of three (3) Communication Antenna Towers - UIS (Tower 4) - (REQ#: ES-17-02592)

Price: ____________________

0011. Installation of two (2) and cabling of two (2) Communication Antenna Towers - CFE (REQ#: ES-17- 02594)

Price: ____________________

0012. Installation of two (2) and cabling of two (2) Communication Antenna Towers - CFE (REQ#: ES-17- 02594)

Price: ____________________

0013. Installation of two (2) and cabling of two (2) Communication Antenna Towers - CFE (Tower 1) (REQ#:

ES-17-02594)

Price: ____________________

0014. Installation of two (2) Communication Antenna Towers - UIS (Tower 3) (REQ#: ES-17-02594)

Price: ____________________

0015. Installation of two (2) Communication Antenna Towers - UIS (Tower 4) (REQ#: ES-17-02594)

Price: ____________________

_____________________________ TOTAL PROPOSED PRICE

Clause List

The remainder of this page has been intentionally left blank.

Section C - Description/Specifications

Scope of Work

See Statement/Scope of Works (SOW) and other descriptive documents (Specifications, Drawings, etc.)

provided as attachments and listed in Section J.

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.10.4-10 INSPECTION OF CONSTRUCTION (SEP 2009)

Section F - Deliveries or Performance

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.10.1-11 GOVERNMENT DELAY OF WORK (APR 1996)

3.10.1-24 NOTICE OF DELAY (MAR 2009)

ADDITIONAL ADMINISTRATIVE INFORMATION

F.1. Place of Performance: Jacksonville, Florida

F.2. Holidays: The following Federal holidays are observed by the Federal Aviation Administration:

- New Year's Day - January 1st

- Martin Luther King's Birthday - Third Monday in January

- Presidents Day - Third Monday in February

- Memorial Day - Last Monday in May

- Independence Day - July 4th

- Labor Day - First Monday in September

- Columbus Day - Second Monday in October

- Veterans Day - November 11th

- Thanksgiving Day - Fourth Thursday in November

- Christmas Day - December 25th

Section G - Contract Administration Data

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.10.1-23 RESERVED (JUL 2017)

OTHER ADMINISTRATION DATA

G.1 Contract Administration Points of Contact

Requestor Primary Contact: James Baldwin, Phone: (404) 263-5627; Email: James.Baldwin@faa.gov.

Requestor Alternate Contact: Lee Raines, Phone: (404) 305-7291; Email: Lee.Raines@faa.gov.

Contracting Officer (CO) - Michael J. Eadon, Federal Aviation Administration Eastern Service Area, AAQ-560 1701 Columbia Avenue, College Park, GA 30337 or by Email: Michael.Eadon@faa.gov

Contracting Officers Representative (COR) - The COR will be provided/confirmed in a Delegation Letter after award and before the pre-construction conference.

G.2 Contracting Officer’s Authority

The Contracting Officer assigned to this contract has responsibility for ensuring the performance of all necessary actions for effective contracting, ensuring compliance with the terms of the contract, and safeguarding the interests of the United States in its contractual relationships. In this regard, the Contracting Officer is the only individual who has the authority to enter into, administer, or terminate this contract. In addition, the Contracting Officer is the only person authorized to approve changes to any of the requirements under this contract, and notwithstanding any provision contained elsewhere in this contract, the said authority remains solely with the Contracting Officer.

The Contractor shall immediately notify the Contracting Officer for clarification when a question arises regarding the authority of any person to act for the Contracting Officer under the contract or when the Contractor receives direction that appears outside contract scope.

Costs incurred that were not authorized by the Contracting Officer and/or work outside the scope of the contract shall be considered unallowable costs and will not be reimbursed by the Government.

G.3 Authority of Contracting Officer’s Representative (COR)

Only those Government Representatives (e.g. COR), as designated in writing by the Contracting Officer, may Only those Government Representatives (e.g. COR), as designated in writing by the Contracting Officer, may provide technical or other interpretations in the performance of this contract. Technical interpretation will be provided only mailto:James.Baldwin@faa.gov mailto:Lee.Raines@faa.gov mailto:Michael.Eadon@faa.gov within the limits specified in this paragraph, as delineated in a letter of authority from the Contracting Officer, or contained elsewhere in Section G of this Contract. As used herein, “technical interpretation” is defined as providing technical clarification, confirming the results of meetings, completing details in the form of work orders, pursuing certain lines of inquiry, or otherwise serving to accomplish the contract SOW as specified in the description of work.

Such technical direction must include or comply with the following:

provide technical or other interpretations in the performance of this contract. Technical interpretation will be provided only within the limits specified in this paragraph, as delineated in a letter of authority from the Contracting Officer, or contained elsewhere in Section G of this Contract. As used herein, “technical interpretation” is defined as providing technical clarification, confirming the results of meetings, completing details in the form of work orders, pursuing certain lines of inquiry, or otherwise serving to accomplish the contract SOW as specified in the description of work. Such technical direction must include or comply with the following:

(a) Be consistent with the general scope of work and terms and conditions contained in the contract. Technical directions may be issued either verbally or in writing.

(b) Does not constitute assignment of new work or change the terms, conditions, or specifications of the contract.

(c) Does not constitute a basis, either directly or indirectly, that could result in a change in the pricing, quantity, quality, period of performance.

Technical direction which exceeds the authority listed above, or the limits of specific letters of authority are invalid and will not be enforceable against the Government. Any costs incurred by the Contractor in violation of this clause will be considered unallowable costs and will not be reimbursed by the Government.

G.4 Billing Instructions

The Contractor shall submit invoices to the Federal Aviation Administration attention to:

One (1) Copy with supporting documentations to: Contracting Officer, As designated; Address: As designated One (1) Copy with supporting documentations to: COR, As designated; Address: As designated

Section H - Special Contract Requirements

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2013)

(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:

(1) Contracts written on paper and contracts in electronic form;

(2) Pen-and-ink signatures and electronic signatures; and

(3) Other legally-required written records and the same information in electronic form.

(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.

(c) Certain documents may need to be provided or maintained in original form, such as large scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.

(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.

Contractors may use the following means of electronic signature technology : digital signaures, passwords, smart cards used with common office computer programs..

(End of Clause)

OTHER CONTRACT REQUIREMENTS

H.1 Wage Rate Determination

In accordance with AMS Clause No. 3.6.2-18 entitled “Davis Bacon Act”, all laborers and mechanics employed or working upon the site of the work will be paid unconditionally and not less often than once a week, and without subsequent deduction or rebate on any account (except such payroll deductions as are permitted by regulations issued by the Secretary of Labor under the Copeland Act (29 CFR Part 3)), the full amount of wages and bona fide fringe benefits (or cash equivalents thereof due at time of payment computed at rates not less than those contained in the wage determination of the Secretary of Labor which is attached hereto and made a part hereof, regardless of any contractual relationship which may be alleged to exist between the Contractor and such laborers and mechanics. See clause AMS Clause 3.6.2-18 and attached Wage Determination for complete information.

Wage Rate Determination for Duval County, Florida- General Decision Number: WD FL170246, Dated:

03/10/2017.

H.2 Notification of Debarment/Suspension Status

The Contractor and its subcontractors shall provide immediate notice to the CO in the event of being suspended, debarred or declared ineligible by any Federal Government Agency or Department, or upon The Contractor and its subcontractors shall provide immediate notice to the CO in the event of beingsuspended, debarred or declared ineligible by any Federal Government Agency or Department, or upon receipt of a notice of proposed debarment from any Federal Government Agency or Department during the performance of this contract.

The Contractor and its subcontractors shall provide immediate notice to the CO in the event of beingsuspended, debarred or declared ineligible by any Federal Government Agency or Department, or upon receipt of a notice of proposed debarment from any Federal Government Agency or Department during the performance of this contract.

H.3 Access to Government Facilities

Part of the effort to be performed under this contract will be at facilities operated by the Federal Aviation Administration. The Contractor will be granted ingress and egress at the specific site where the effort is to be accomplished.

While Contractor personnel are at Government facilities, they are required to comply with all rules and regulations of the site, particularly in the areas of health and safety. The facilities to which the Contractor has access at all times will be in the custody of the Federal Government and will not be considered "Government Property" furnished to the Contractor.

Part of the effort to be performed under this contract will be at facilities operated by the Federal Aviation Administration. The Contractor will be granted ingress and egress at the specific site where the effort is to be accomplished. While Contractor personnel are at Government facilities, they are required to comply with all rules and regulations of the site, particularly in the areas of health and safety. The facilities to which the Contractor has access at all times will be in the custody of the Federal Government and will not be considered "Government Property" furnished to the Contractor.

The scheduling of access to Government facilities shall be under the control of the Government. Facility availability will be scheduled to permit timely performance of contract requirements. However, Contractor personnel shall be prepared to work outside the normal daytime shift if conditions at the facility so require.

The Contractor must require that all Contractor personnel who perform work at FAA facilities wear identification badges which clearly identify individuals as Contractor employees.

The Government reserves the right to issue its own contractor identification badges. If Government badges are required, they will be issued in accordance with Government procedures.

Contractor personnel, including employees of subcontractors, suppliers, etc., working or visiting an FAA facility, shall abide by all appropriate traffic, parking, security, and airport regulations in effect at that facility.

H.4 Government Furnished Property (GFP)

See AMS Clause No. 3.10.3-2 and list of GFP (attached) and also listed in SOWs.

Section I - Contract Clauses

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.1.7-1 EXCLUSION FROM FUTURE AGENCY CONTRACTS (AUG 1997)

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (AUG 1997)

3.1.7-4 ORGANIZATIONAL CONFLICT OF INTEREST - MITIGATION PLAN REQUIRED (APR 2012)

3.1.7-5 DISCLOSURE OF CONFLICTS OF INTEREST (MAR 2009)

3.2.2.3-33 ORDER OF PRECEDENCE (MAR 2009)

3.2.2.3-42 DIFFERING SITE CONDITIONS (JUL 2004)

3.2.2.3-43 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK (JUL 2004)

3.2.2.3-45 MATERIAL AND WORKMANSHIP (JUL 2004)

3.2.2.3-46 SUPERVISING THE CONTRACT WORK (JUL 2004)

3.2.2.3-47 PERMITS AND RESPONSIBILITIES (JUL 2004)

3.2.2.3-49 PROTECTING EXISTING VEGETATION, STRUCTURES, EQUIPMENT, UTILITIES, AND

IMPROVEMENTS (JUL 2004)

3.2.2.3-50 PROPERTY PROTECTION (OCT 2014)

3.2.2.3-51 OPERATIONS AND STORAGE AREAS (APR 2012)

3.2.2.3-52 USE AND POSSESSION BEFORE THE PROJECT IS COMPLETE (JUL 2004)

3.2.2.3-53 CLEANING UP AND ROADWAY MAINTENANCE (JUL 2004)

3.2.2.3-54 PREVENTING ACCIDENTS (JUL 2004)

3.2.2.3-55 AVAILABILITY AND USE OF UTILITY SERVICES (JUL 2004)

3.2.2.3-56 SCHEDULES FOR CONSTRUCTION CONTRACTS (JUL 2004)

3.2.2.3-58 LAYOUT OF WORK (MAR 2009)

3.2.2.3-60 SPECIFICATIONS, DRAWINGS, AND MATERIAL OFFERS (MAR 2009)

3.2.2.3-62 PRECONSTRUCTION CONFERENCE (JUL 2004)

3.2.2.3-67 SPECIAL PRECAUTIONS FOR WORK AT OPERATING AIRPORTS (JUL 2004)

3.2.2.3-68 SAFETY AND HEALTH (OCT 2014)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2011)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.5-1 OFFICIALS NOT TO BENEFIT (APR 1996)

3.2.5-3 GRATUITIES OR GIFTS (JAN 1999)

3.2.5-4 CONTINGENT FEES (OCT 1996)

3.2.5-5 ANTI-KICKBACK PROCEDURES (OCT 2010)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 1996)

3.3.1-2 PAYMENTS UNDER FIXED-PRICE CONSTRUCTION CONTRACTS (APR 1996)

3.3.1-9 INTEREST (SEP 2009)

3.3.1-15 ASSIGNMENT OF CLAIMS (APR 1996)

3.3.1-19 PROMPT PAYMENT FOR CONSTRUCTION CONTRACTS (JAN 2017)

3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS (OCT

2012)

3.3.1-31 PROGRESS PAYMENTS (NOV 2000) - ALTERNATE I (NOV 1997)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD MANAGEMENT

(AUG 2012)

3.3.2-1 FAA COST PRINCIPLES (JAN 2016)

3.4.1-7 NOTICE TO PROCEED (APR 1996)

3.4.1-10 INSURANCE - WORK ON A GOVERNMENT INSTALLATION (JUL 1996)

3.4.2-6 TAXES - CONTRACTS PERFORMED IN U.S. POSSESSIONS OR PUERTO RICO (OCT 1996)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (APR 2013)

3.5-1 AUTHORIZATION AND CONSENT (JAN 2009)

3.5-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT (JAN

2009)

3.6.1-3 UTILIZATION OF SMALL, SMALL DISADVANTAGED AND WOMEN-OWNED, AND

SERVICE-DISABLED VETERAN OWNED SMALL BUSINESS CONCERNS (MAR 2009)

3.6.1-4 SMALL, SMALL DISADVANTAGED, WOMEN-OWNED AND SERVICE-DISABLED VETERAN

OWNED SMALL BUSINESS SUBCONTRACTING PLAN (JUL 2017)

3.6.1-7 LIMITATIONS ON SUBCONTRACTING (APR 2016)

3.6.1-15 POST-AWARD SMALL BUSINESS PROGRAM RE-REPRESENTATION (OCT 2016)

3.6.2-1 CONTRACT WORK HOURS AND SAFETY STANDARDS ACT-OVERTIME COMPENSATION

(JAN 2012)

3.6.2-2 CONVICT LABOR (APR 1996)

3.6.2-9 EQUAL OPPORTUNITY (AUG 1998)

3.6.2-12 EQUAL OPPORTUNITY FOR VETERANS (JAN 2011)

3.6.2-13 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

3.6.2-16 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (APR 1996)

3.6.2-18 DAVIS BACON ACT (APR 2017)

3.6.2-19 WITHHOLDING-LABOR VIOLATIONS (JUL 2017)

3.6.2-20 PAYROLLS AND BASIC RECORDS (APR 2017)

3.6.2-21 APPRENTICES, TRAINEES, AND HELPERS (APR 2017)

3.6.2-22 SUBCONTRACTS (LABOR STANDARDS) (APR 2017)

3.6.2-23 CERTIFICATION OF ELIGIBILITY (APR 2017)

3.6.2-35 PREVENTION OF SEXUAL HARASSMENT (AUG 1998)

3.6.2-39 TRAFFICKING IN PERSONS (OCT 2015)

3.6.2-44 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS

ACT (JAN 2012)

3.6.3-7 WASTE MANAGEMENT AND POLLUTION PREVENTION (APR 2017)

3.6.3-13 AFFIRMATIVE PROCUREMENT OF RECYCLED CONTENT AND PRODUCTS UNDER

SERVICE AND CONSTRUCTION CONTRACTS (OCT 2016)

3.6.3-14 USE OF ENVIRONMENTALLY PREFERABLE PRODUCTS (OCT 2016)

3.6.3-16 DRUG FREE WORKPLACE (MAR 2009)

3.6.3-23 DELIVERY OF ELECTRONIC AND PAPER DOCUMENTS (OCT 2016)

3.6.3-24 ASBESTOS NESHAP COMPLIANCE (OCT 2015)

3.6.4-5 BUY AMERICAN - STEEL AND MANUFACTURED PRODUCTS (JUL 2010)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.5-1 UTILIZATION OF INDIAN ORGANIZATIONS AND INDIAN OWNED ECONOMIC

ENTERPRISES (MAR 2009)

3.9.1-1 CONTRACT DISPUTES (OCT 2011)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-8 SUSPENSION OF WORK (SEP 1998)

3.10.1-15 CHANGES-CONSTRUCTION, DISMANTLING, DEMOLITION, OR REMOVAL OF

IMPROVEMENTS (JUL 1996)

3.10.1-16 CHANGES AND CHANGED CONDITIONS (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.1-26 CONTRACTOR PERFORMANCE ASSESSMENT REPORTING SYSTEM (APR 2013)

3.10.2-1 SUBCONTRACTS (FIXED-PRICE CONTRACTS) (APR 1996)

3.10.2-6 SUBCONTRACTS FOR COMMERCIAL ITEMS AND COMMERCIAL COMPONENTS (APR

1996)

3.10.3-1 DEFINITIONS (APR 2012)

3.10.3-2 GOVERNMENT PROPERTY - BASIC CLAUSE (APR 2012) - ALTERNATE I (APR 2004)

3.10.4-19 GOVERNMENT INDUSTRY DATA EXCHANGE PROGRAM (GIDEP) (JAN 2002)

3.10.4-23 CONTRACTOR AND SUBCONTRACTOR COMPLIANCE WITH FASTENER ACT (NOV 1997)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT 1996)

3.10.6-6 DEFAULT (FIXED PRICE CONSTRUCTION) (OCT 1996)

3.13-5 SEAT BELT USE BY CONTRACTOR EMPLOYEES (OCT 2001)

3.13-11 PLAIN LANGUAGE (JUL 2006)

3.13-13 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JAN 2011)

3.13-14 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS

(OCT 2012)

3.14-5 SENSITIVE UNCLASSIFIED INFORMATION (SUI) (JUL 2013)

3.1.7-6 DISCLOSURE OF CERTAIN EMPLOYEE RELATIONSHIPS (JUL 2009)

(a) The policy of the FAA is to avoid doing business with contractors, subcontractors, and consultants who have a conflict of interest or an appearance of a conflict of interest. The purpose of this policy is to maintain the highest level of integrity within its workforce and to ensure that the award of procurement contracts is based upon fairness and merit.

(b) The contractor must provide to the Contracting Officer the following information with its proposal and must provide an information update within 30 days of the award of a contract, any subcontract, or any consultant agreement, or within 30 days of the retention of a Subject Individual or former FAA employee subject to this clause:

(1) The names of all Subject Individuals who:

(i) participated in preparation of proposals for award; or

(ii) are planned to be used during performance; or

(iii) are used during performance; and

(2) The names of all former FAA employees, retained by the contractor who were employed by FAA during the two year period immediately prior to the date of:

(i) the award; or

(ii) their retention by the contractor; and

(3) The date on which the initial expression of interest in a future financial arrangement was discussed with the contractor by any former FAA employee whose name is required to be provided by the contractor pursuant to subparagraph (2); and

(4) The location where any Subject Individual or former FAA employee whose name is required to be provided by the contractor pursuant to subparagraphs (1) and (2), are expected to be assigned.

(c) "Subject Individual" means a current FAA employee's father, mother, son, daughter, brother, sister, uncle, aunt, first cousin, nephew, niece, husband, wife, father-in-law, mother-in-law, son-in-law, daughter-in-law, brother-in-law, sister-in-law, stepfather, stepmother, stepson, stepdaughter, stepbrother, stepsister, half brother, half sister, spouse of an in-law, or a member of his/her household.

(d) The contractor must incorporate this clause into all subcontracts or consultant agreements awarded under this contract and must further require that each such subcontractor or consultant incorporate this clause into all subcontracts or consultant agreements at any tier awarded under this contract unless the Contracting Officer determines otherwise.

(e) The information as it is submitted, must be certified as being true and correct. If there is no such information, the certification must so state.

(f) Remedies for nondisclosure: The following are possible remedies available to the FAA should a contractor misrepresent or refuse to disclose or misrepresent any information required by this clause:

(1) Termination of the contract.

(2) Exclusion from subsequent FAA contracts.

(3) Other remedial action as may be permitted or provided by law or regulation or policy or by the terms of the contract.

(g) Annual Certification. The contractor must provide annually, based on the anniversary date of contract award, the following certification in writing to the Contracting Officer:

ANNUAL CERTIFICATION OF DISCLOSURE OF CERTAIN EMPLOYEE RELATIONSHIPS

The contractor represents and certifies that to the best of its knowledge and belief that during the prior 12 month period:

[ ] A former FAA employee(s) or Subject Individual(s) has been retained to work under the contract or subcontract or consultant agreement and complete disclosure has been made in accordance with subparagraph (b) of AMS Clause 3.1.7-6.

[ ] No former FAA employee(s) or Subject Individual(s) has been retained to work under the contract or subcontract or consultant agreement, and disclosure required by AMS Clause 3.1.7-6 is not applicable.

Authorized Representative

Company Name

Date

(End of clause)

3.2.2.3-41 PERFORMING WORK (JUL 2004)

The Contractor (you) must perform, using your own organization, work equivalent to at least 25 percent of the total amount of work under the contract on the site. The CO may modify this contract to reduce this percentage if you request a reduction and the CO determines that it would be to the Government's advantage to do so.

(End of clause)

3.2.2.3-60 SPECIFICATIONS, DRAWINGS, AND MATERIAL OFFERS (MAR 2009) - ALTERNATE I

(MAR 2009)

(a) If either the specifications or the drawings (but not both) mention tasks, the Contractor (you) must assume that the tasks are in both. If the drawings and specifications differ, the specifications govern. If there is a discrepancy in the figures, in the drawings, or in the specifications, submit the matter promptly to the Contracting Officer (CO), who will promptly determine which governs, and notify you in writing. Any adjustment you make without the CO's determination is at your own risk and expense. From time to time the CO will provide necessary detailed drawings and other information, unless otherwise provided.

(b) Wherever in the specifications or the drawings FAA (we, our) uses "directed," "required," "ordered," "designated," "prescribed," or similar words, they refer to the CO's requirements. Similarly, "approved," "acceptable," "satisfactory," or similar words refer to the CO's approval, unless otherwise expressly stated. You must have a complete set of plans and specifications on site and available for our use.

(c) Where we use "as shown," "as indicated," "as detailed," or similar words, they refer to the drawings accompanying this contract, unless stated otherwise. The word "provided" means "provided and installed."

(d) Omissions from the drawings and specifications or the erroneous description of details of work which are necessary to carry out the intent of the drawings and specifications, or which are customarily performed, does not relieve you from performing those omitted or erroneously described details of the work. You must perform them as if fully and correctly set forth and described in the drawings and specifications.

(e) You must check all drawings we provide to you before starting work and must promptly notify the CO of any discrepancies. In general you should follow figures marked on drawings, rather than scale measurements. In general, large scale drawings have precedence over small scale drawings. You must compare all drawings and verify the figures before laying out the work. If you do not verify the figures, you will be responsible for any errors you might have avoided had you verified them.

(f) "Shop drawings" means drawings, you or any subcontractor submit to us under a construction contract, showing in detail the proposed fabrication and assembly of structural elements and the installation (that is, form, fit, and attachment details) of materials or equipment. It includes drawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance and test data, and similar materials you provided to explain in detail specific portions of the work the contract requires.

FAA may duplicate, use, and disclose in any manner and for any purpose shop drawings you deliver under this contract.

(g) If this contract requires material offers (for example, shop drawings, catalog cuts, certificates of conformance), you must coordinate all of your offers, and review them for accuracy, completeness, and compliance with contract requirements. You must provide evidence that you approve the submittals. If you submit materials to us without this evidence, we may return them and ask you to resubmit them. The CO will indicate whether he or she approves or disapproves your offer, and if the CO does not approve it as submitted, will indicate our reasons for rejecting it. Any work done before the CO's approval is at your risk. The CO's approval does not relieve you from responsibility for any errors or omissions in the submittals, nor from responsibility for complying with the contract requirements, except as described under (h).

(h) If you submittals vary from the contract requirements, you must describe the variations in writing, separate from the submittal, when you submit them. Send this description, a copy of the offer, and a proposal to incorporate it into the contract directly to the CO. If the CO approves a variation, the CO must issue an appropriate contract modification, unless the variation is minor or does not involve a change in price or in time of performance.

(i) You must submit to the CO for approval four copies (unless otherwise indicated) of all shop drawings as called for under the various headings of these specifications. The CO will keep three sets (unless otherwise indicated) of all offers and will return one set to you.

(j) You must insert this clause, with appropriate changes in the designation of the parties, in all subcontracts.

(k) When you finish the work under this contract, you must provide 2 complete reproducible sets of all shop drawings as we finally approve them. These drawings must show all changes and revisions made up to the time you finish the work and we accept it.

(End of clause)

3.2.2.3-71 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (JUL 2004)

The Contractor (you) must

(a) begin work under this contract within 10 calendar days after the date you receive the notice to proceed,

(b) perform the work diligently, and

(c) complete the entire work ready for use not later than 180 days. The time allowed for completion must include final cleanup of the premises.

(End of clause)

3.2.2.3-71 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (JUL 2004) -

ALTERNATE I (JUL 2004)

The Contractor (you) must

(a) begin work under this contract within 10 calendar days after the date you receive the notice to proceed,

(b) perform the work diligently, and

(c) complete the entire work ready for use not later than 180 calendar days. The time allowed for completion must include final cleanup of the premises.

(d) The completion date assumes that the successful offeror will receive the notice to proceed by 20 calendar days after award date. The CO will extend the completion date by the number of calendar days after the above date that you receive the notice to proceed, except to the extent that the delay in issuing the notice to proceed results from your failure to execute the contract and give the required performance and payment bonds to FAA within the time specified.

(End of clause)

3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

(a) Definitions. As used in this clause

"Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

"Data Universal Numbering System +4 (DUNS+4) number" means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.)

This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database.

"System for Award Management (SAM) Database" means the primary Government repository for Contractor information required for the conduct of business with the Government.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number

(i) If located within the United States, by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://fedgov.dnb.com/webform; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and ZIP Code.

(iv) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran-Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are designated as a SDVOSB by the Department of Veterans Affairs, and this designation appears as such on the Veteran Affairs website, https://www.vip.vetbiz.gov.

(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:

(A) change the name in the SAM database;

(B) comply with the requirements of AMS regarding novation and change-of-name agreements; and

(C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees shall be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.

(End of Clause)

3.4.1-4 PERFORMANCE BOND REQUIREMENTS (JAN 2017)

(a) The contractor is required to submit a performance bond in a penal amount equal to 100 percent of the contract price, but for this contract the amount required by the Contracting Officer is 100 percent of the contract price as stated..

(b) The bond must be executed on specified forms, and sureties must be acceptable to the Federal Aviation Administration.