6055VL02 Ordering Data Sheet (ODS).docx

This is an Ordering Data Sheet (ODS) specifying the technical requirements for a hose assembly procurement. The Navy requires two units of a 1/2 inch ID hose assembly with an overall length of 1500 inches (±2 percent tolerance) designed for high-pressure hydraulic applications. The hose must meet stringent performance specifications including 2,000 PSI working pressure, 8,000 PSI burst pressure, a maximum fluid temperature rating of 450 degrees Fahrenheit, and a minimum bend radius of 3 inches. The hose must be supplied as one continuous length with no splicing permitted and includes a vacuum service rating of 28 inches of mercury.

The hose assembly composition requires a smoothbore PTFE (Teflon) liner extruded tube with a white ST-Flex silicone outer jacket, reinforced with single 304 stainless steel wire braid, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC end fittings. A Certificate of Compliance is mandatory for this order, and any changes to specifications or technical requirements are prohibited without written approval from the Shipyard's Administrative Contracting Officer. This procurement is associated with the Naval Supply Systems Command under Job Order 36JCD08009 and connects to a pre-solicitation opportunity (N4523A-26-Q-4035) designated as a Small Business Set-Aside, with inquiries directed to andrew.r.smith6@navy.mil or andrew.r.smith7.civ@us.navy.mil.