6055VL00 Ordering Data Sheet (ODS).docx

This is an Ordering Data Sheet (ODS) specifying technical requirements for a hose assembly procurement. The Naval Supply Systems Command is seeking two (2) hose assemblies with the following specifications: 1/2 inch inner diameter, 120 inches overall length (with +/- 2 percent tolerance), rated for 2,000 PSI working pressure and 8,000 PSI burst pressure, with a maximum fluid temperature of 450 degrees Fahrenheit and 3-inch minimum bend radius. The hose must be one continuous length with no splicing allowed and must include a smoothbore PTFE liner covered with white ST-Flex silicone outer jacket, single 304 stainless steel wire braid reinforcement, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC end fittings. The assembly must have a vacuum service rating of 28 inches of mercury.

Contractors must comply with all specifications without modification unless approved by the Shipyard's Administrative Contracting Officer (ACO), and a Certificate of Compliance (COC) is required with submission. This procurement is part of Job Order 36JCD08009, tied to the pre-solicitation synopsis N4523A-26-Q-4035 published by the Naval Supply Systems Command. Interested vendors should submit formal quotes including item specifications to andrew.r.smith6@navy.mil or andrew.r.smith7.civ@us.navy.mil and may request access to any secured or controlled attachments through email. This is designated as a Small Business Set-Aside solicitation.