6055VL01 Ordering Data Sheet (ODS).docx

This is an Ordering Data Sheet (ODS) that specifies the technical requirements for a hose assembly procurement. The item is a 1/2 inch ID hose assembly with an overall length of 780 inches (±2 percent tolerance) designed for high-pressure hydraulic applications. The hose must meet 2,000 PSI working pressure and 8,000 PSI burst pressure ratings, with a maximum fluid temperature capacity of 450 degrees Fahrenheit and a minimum bend radius of 3 inches. The hose must be manufactured as one continuous length with no splicing allowed and include a vacuum service rating of 28 inches of mercury.

Material specifications require a smoothbore PTFE (Teflon) liner with a white ST-Flex silicone outer jacket, single 304 stainless steel wire braid reinforcement, 304 stainless steel crimp collars, and 316 stainless steel 1/2 inch female JIC ends fittings. The procurement calls for a quantity of 2 units, and a Certificate of Compliance is mandatory. The ordering data sheet is associated with Job Order 36JCD08009, Key Operation F01, Item 109, Revision 6055VL01, and references a Statement of Work (SOW) for additional requirements. Any specification or technical requirement changes require approval from the Naval Shipyard's Administrative Contracting Officer (ACO). This document supports the Department of the Navy Naval Supply Systems Command's Pre-Solicitation for hose assembly (Solicitation Number N4523A-26-Q-4035), which is designated as a Small Business Set-Aside.