6_SPI_combined.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 07 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

2169 MOD

DD

FORM

MARCH 87

COMPUTER GENERATED

SPI NO. F00-349-3943

SPECIAL MARKINGS:

A) SPI NO. F00-349-3943

B) PROPER SHIPPING NAME: CARTRIDGES, POWER DEVICE

PACKAGING WAS MANUFACTURED.

C) UN POP MARKING:

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

CLOSURE:

LEVEL B:

LEVEL A:

USA/DOD/AF70

n

4G/Y10/S/**

UN0276

u

PART OR DRAWING NO.

SPECIAL PACKAGING INSTRUCTION

ITEM NOMENCLATURE

PRESERVATIVE: N/A

MARKING IAW MIL-STD-129

UNSERVICEABLE METHOD: 41

QUP

ICQ

MULTIPLE PART NUMBERS

ORIGINAL

SELECTOR, EJECTION SEQUENCE

06285

DATE

AUTH.

CHK.

1377-00-349-3943 ES

NATIONAL STOCK NO.

CURRENT

REV

P.S.

ILL.

98747

CODE ID

DODPOPHM/USA/DOD/AF70/TR14005

SHEET 1 OF 6

SPI NO. (TPO)

A

SEE NOTICE 1

LEVEL A LEVEL B

LENGTH WIDTH DEPTH

VARIES

10 3/8

AS SPECIFIED BELOW AND BILL OF MATERIALS

SPEC STYLE TYPE CL VRTY GR TR

REVISIONS

DESCRIPTION

VARIES

CNTR I.D.

LTR

ITEM DIM

ITEM WT.

CNTR O.D.

GROSS CU FT

GROSS WT LBS

DESIGN FRAGILITY G

ASTM D6251

ASTM D5118

LEVEL

A

B

PACKING

DATE

10 3/8

16 3/4

1.043

K. KNIGHTON B. GORDER D. HALE J. BURLEIGH

F00-349-3943

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

RSC

III

B

V3c

K

IAW: THIS INSTRUCTION

IAW: ASTM D6251

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

SERVICEABLE METHOD: 41

J

ADDED DISTRIBUTION STATEMENT & DESTRUCTION NOTICE UPDATED POP MARKING, BOM & ITEM INFORMATION, INCLUDED CLOSURE METHOD DRAWING

18040

CLEANING & DRYING: IAW MIL-STD-2073-1

MILITARY PRESERVATION IAW MIL-STD-2073-1

K

22298

2169C MOD

SHEET 2 OF 6

REQD

P/N

QTY

SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

NOMENCLATURE OR

SPECIFICATION

MATERIAL

A/R 1 1 A/R

TAPE, PACKAGING WRAP BARRIER BAG CUSHIONING

3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II

-4 -3 -2 -1

NOTES

1. WRAP ITEM WITH REF.-3. PLACE WRAPPED ITEM INSIDE BAG, REF.-2, REMOVE AIR AND SEAL.

2. TO PREVENT BAGS FROM TOUCHING SHIPPING CONTAINER AND PREVENT MOVEMENT USE CUSHIONING, REF.-1

AS REQUIRED.

3. SEAL CONTAINER WITH TAPE, REF.-4.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

MUNITION NOTICES

NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

SHEET 3 OF 6

SHEET 4 OF 6

ITEM REFERENCE

SHEET 5 OF 6

CLOSURE

CLOSURE

REFER TO MIL-STD-129 FOR MARKING

REQUIREMENTS OF PALLETIZED UNIT

LOADS OF AMMUNITION.

REQD

P/N

QTY

SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

NOMENCLATURE OR

SPECIFICATION

MATERIAL

20 1 2 2 2 1

EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY

AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48

NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 ASTM D3953 TYPE 1, REG DUTY, FIN B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1

-6 -5 -4 -3 -2 -1

40 BOXES @ 16 LBS NET PALLET WT PLYWOOD WT STRAPPING WT

640 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS

723.35 LBS

CUBE OF PALETIZED LOAD = 48.4

PALLETIZATION PROCEDURE FOR LEVEL B PACK

PALLETIZATION PROCEDURE FOR LEVEL B PACK

SHEET 6 OF 6

Sheets and Views

003493943-SHEET 01

003493943-SHEET 02

003493943-SHEET 03

003493943-SHEET 04

003493943-SHEET 05

003493943-SHEET 06

CONTROLLED BY: 406 SCMS

CONTROLLED BY: GULAA-HILL AFB

CONTROLLED BY: CUI/SP-CTI

DISTRIBUTION/DISSEMINATION CONTROL: FEDCON

POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL

CUI

NOTICE 1: CLASS 1 (EXPLOSIVE) MATERIAL OWNED BY THE DEPARTMENT OF DEFENSE (DOD) PACKAGED PRIOR TO JANUARY 1, 1990 IN ACCORDANCE WITH THE PACKAGING REQUIREMENTS IN EFFECT AT THAT TIME ARE EXCEPTED FROM THE REQUIREMENTS OF PERFORMANCE ORIENTED PACKAGING (POP) PROVIDED THE PACKAGING HAVE MAINTAINED THEIR INTEGRITY AND THE GOODS ARE DECLARED AS GOVERNMENT OWNED GOODS PACKAGED PRIOR TO JANUARY 1, 1990. THIS CLAUSE DOES NOT APPLY TO COMMERCIAL AIR SHIPMENTS. (REF DLAD 4145.41/AFJI 24-210.)

NOTICE 2: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

NOTICE 6: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

1. WRAP ITEM WITH REF.-3 AND PLACE INTO REF.-2 BARRIER BAG. REMOVE AIR AND SEAL.

2. USE CUSHIONING REF.-1 TO PREVENT ITEM FROM TOUCHING SHIPPING CONTAINER AND TO PREVENT MOVEMENT.

3. SEAL CONTAINER USING REF.-4 ACCORDING TO THE DRAWING.

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

Sheets and Views

010560824-SHEET 01

010560824-SHEET 02

010560824-SHEET 03

010560824-SHEET 04

010560824-SHEET 05

010560824-SHEET 06

CONTROLLED BY: 406 SCMS

CONTROLLED BY: GULAA-HILL AFB

CONTROLLED BY: CUI/SP-CTI

DISTRIBUTION/DISSEMINATION CONTROL: FEDCON

POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL

NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE

REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

1. MAY PLACE UP TO 5 BAGGED ITEMS INTO SHIPPING CONTAINER.