6-Attachment G - Freightliner M2 106 Peterson TL3 - PCN 163463 170066.pdf
PDF 464 KB Posted
- Solicitation number
- ITB-26-00394
- Issued by
- Hillsborough County, Florida
About this file
This specification document outlines the minimum chassis and body requirements for Freightliner M2 106 vehicles equipped with Peterson AL2 Hardox Grapple systems for Hillsborough County, Florida, under purchase order numbers 163463 and 170066. The vehicles are tandem axle, single cab chassis units powered by Cummins L9 350 HP diesel engines paired with Allison 3000_RDS_P transmissions featuring side-by-side openings. Each unit consists of a 22-foot, 45-cubic-yard trash body constructed entirely of Hardox material with dual cylinder bucket systems, tandem joystick controls, swing locks, and comprehensive safety equipment including backup cameras, work lights, and amber flashers. The grapple bodies feature heavy-duty swing motors, standard 60-inch buckets, boom-up warning lights with audible alarms, and fire extinguishers. Additional specifications include tow hooks, cone holders, electric goal post-type load covering devices, barn doors, and 15 LED body lights with amber LED flashers in rear corner posts. The vehicle bodies are to be painted in single-color PI orange with standard black body color as specified, and all units must include the specified 4-corner LED directional lighting package using white LEDs controlled by a single toggle switch mounted on the dashboard.
The dealer is responsible for providing title, county tag, registration, and temporary tags with two-way overnight shipping of all documentation in accordance with Hillsborough County Fleet Management Policy. Dealers must arrange offload capabilities for vehicle delivery and provide minimum quarterly build and order status updates to the County. All dealers must not utilize OEM wiring for equipment add-ons and must comply with general OEM practices. The 4-corner LED requirements specify installation of specific directional lights in each corner of the front grille and rear bumper sections with proper wiring, fusing, and circuit protection to prevent chaffing and electrical hazards during operation.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Freightliner w/ Peterson AL2 Hardox Grapple
PCNs 163463 & 170066
Minimum Chassis Specifications for Petersen AL2 Hardox Grapple:
• Freightliner Tandem Axle Single Cab Chassis
• Cummins L9 350 HP diesel engine
• Allison 3000_RDS_P transmission WITH SIDE/SIDE OPENINGS
• Cab to axle/Trunion dimension= 204" for 22' x 45yd body w/ dual walk thru
• Front axle rating =16,000LBS.
• Rear axle rating =30,000LBS.
• GVW rating=46,000LBS.
• Frame =2,500,000RBM
• Maximum frame height = 45INCHES
• Standard chassis equipment, including, but not limited to:
o High back air suspension driver’s seat o Passenger seat o Power windows and door locks o Back up camera o Battery box mounted under frame
Grapple Body Specification:
• 22', 45yd Trash Body, HARDOX Entire Body.
• Heavy Duty Swing Motor Dual Cylinder Bucket
• Tandem controls Joystick
• Standard height pedestal
• Grating heat shield (for dual controls only)
• HDHI outrigger strobe
• Standard bucket 60”
• Boom-up warning light/audible alarm
• Swing lock (pedestal for boom)
• Hose guards- head & valve bank
• Work lights - (set of 2) (1 each side of boom)
• Toolbox, truck frame mounted under body (add-on)
• HD control box
• Throttle engine kill & horn
• Tandem pump in lieu of single 18 GMP
• Triangle flare kit
• Fire extinguisher, 10lb
• Loader single color PI orange
• Install tow hooks on the rear outside of the right and left frame rails.
• Install cone holders on the right and left frame rail forward of drive wheels.
• Install amber flashers in upper and lower body corner posts.
• Electric goal post type load covering device
• Standard barn doors for body
• Wire loom for body wiring
• Single strobe mounted on rear of body
• Led type body lights, 15 ea.
• Amber led flashers in rear corner post
• Brush guard for single rear strobe
• ABSI Z245 package
• Work lights - (set of 2) (curbside under body)
• Work lights - (set of 2) (streetside under body)
• Body color: black
THE DEALER IS RESPONSIBLE FOR PROVIDING TITLE, COUNTY TAG AND REGISTRATION. THIS
SHALL INCLUDE THE TEMPORARY TAG, TWO WAY OVERNIGHT SHIPPING OF ALL
DOCUMENTATION AND ANY ASSOCIATED FEES
IN ACCORDANCE WITH HILLSBOROUGH COUNTY FLEET MANAGEMENT POLICY, DEALER IS
RESPONSIBLE FOR ARRANGING OFFLOAD CAPABILITIES FOR THEIR VEHICLES OR EQUIPMENT
BEING DELIVERED.
THE DEALER WILL PROVIDE HILLSBOROUGH COUNTY FLEET MANAGEMENT WITH MINIMUM
QUARTERLY UPDATES ON THE BUILD/ORDER STATUS OF THE EQUIPMENT.
DEALER MUST NOT UTILIZE OEM WIRING FOR EQUIPMENT ADD-ONS DEALER MUST ABIDE BY
GENERAL PRACTICES COVERED UNDER OEM.
4 Corner LED Requirements
4 Corner LED Lights / Formerly Called Strobes (VENDOR):
Install led directional light #BK7308093 (4 ea) - the color of all 4 LEDs shall be white. One LED is to be installed in each corner of the unit’s front grille and rear bumper sections as shown using red circles in attached pictures.
All 4 bulbs shall be mounted and wired according to manufacturer’s guidelines and be controlled by one toggle switch #ECHRS1032 where LEDs can be activated/deactivated without ignition being on. Toggle switch shall be mounted in center bottom portion of dashboard to prevent accidental activation. All wiring shall be secured in a fashion that prevents chaffing, shorting of circuit, and becoming snagged on any debris while unit is in operation. The complete circuit shall be fuse protected using a #BK782-2023 fuse holder at the battery
4 Corner LED Requirements
File details come from the government source that posted it. Updated .