12-Attachment F - 200gal Truck-Mounted Spray System - PCNs 157954 162447.pdf

This is a technical specification attachment for the Hillsborough County Board of County Commissioners' FY26B Various Construction-Road Maintenance Vehicles & Equipment procurement, valued at $4,351,000.00. The document outlines requirements for two (2) bed-mounted 200-gallon spray systems with front-mounted aluminum boom applicators to be fabricated and installed on standard 2024 Ford F250 4x4 flatbed trucks (VINs 1FTBF2BA2REF65553 and 1FTBF2BA2REF65522). Each spray system shall include a polyethylene low-profile tank measuring 60" x 48" x 19", a P1375 diaphragm pump rated at 12 volts and 6 GPM maximum with 70 PSI maximum pressure, cab-controlled operation, two Dosatron injection pumps, a manual rewind hose reel with 100 feet of orange agricultural hose, a JD-9 gun with brass quick disconnects, a stainless steel flowmeter, and a front-mounted aluminum boom with cab-controlled up/down actuation and tilt capability designed to provide a 3-foot wide spray swath at 7 feet from the truck. The systems must be fully plumbed, wired, and ready to install, with a check valve to prevent flow to the spray head once the pump is turned off.

The vendor is responsible for providing all materials and labor for fabrication and installation, and must arrange offload capabilities for vehicle delivery in accordance with Hillsborough County Fleet Management Policy. The dealer is required to provide Hillsborough County Fleet Management with minimum quarterly updates on the build and order status of the equipment throughout the procurement and delivery process.