6-Attachment B – Scope of Work – West Side Gate.pdf

This Scope of Work document is part of an Invitation to Quote issued by the City of Little Rock for gates and interior fencing at the Little Rock Zoo's Rhino Barn. The project requires the installation of two 50-inch tall by 47-inch wide gates constructed from 2-inch schedule 40 square tubing with horizontal bars spaced at 32 inches and 50 inches from the bottom. Each gate shall be equipped with two branded "SHUTIT BADASS ORIGINAL HINGES" (Model # C13000) and mounted on 4-inch square schedule 40 steel posts anchored to concrete and positioned 5 inches off the floor. Two slide bolts per gate made from 1-inch round rod and pipe with flat plate and locking holes for padlocks shall be installed on the 32-inch and 50-inch horizontal bars. The left gate from the inside shall include a 4-inch wide stop with a drop pin made of 1-inch round rod. A mandatory Pre-Bid Meeting has been scheduled for January 21, 2026, at 10:00 AM, where contractors must arrive at the work site to conduct proper field measurements.

All metal components shall be painted with rust preventative and finished with Sherwin Williams direct-to-metal oil-based paint branded "SW BRZ3 Chestnut Bronze." The scope specifies exact hardware brands and specifications to ensure consistency and durability for the zoo's animal containment requirements. No pricing terms, set-asides, funding amounts, or contract term information is detailed in this scope of work document.