ITEMS LIST

Maintenance, Repair and, installation of the ITS Fiber-Optic System

For Regions 1, 2, 3, and 4

The Department will measure and pay based on each of the following criteria.

Payment is contingent upon acceptance by the Department.

Items are listed by Specification and in tables as follows:

Additional Information

Traffic Control

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control when work is beyond the shoulder. Plans will be submitted to the “Work Requester” ten days prior to the beginning of work. See UDOT’s current Standard Plans and Specifications and the MUTCD “Work Beyond the Shoulder” for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard plans.

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control when work requires shoulder operations. Traffic Control plans must be submitted to the “Work Requester” for approval ten days prior to beginning work. See UDOT’s current Standard Plans and Specifications for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard Plans.

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control when work requires closure of a single traffic lane. Traffic Control plans must be submitted to the “Work Requester” for approval ten days prior to beginning work. See UDOT’s current Standard Plans and Specifications for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard Plans.

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control when work requires closure of a two-traffic lane. Traffic Control plans must be submitted to the “Work Requester” for approval ten days prior to beginning work. See UDOT’s current Standard Plans and Specifications for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard Plans.

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control in an Urban Intersection under 50 MPH. Plans will be submitted to the “Work Requester" ten business days prior to the beginning of work. See UDOT's current Standard Plans and Specifications and the MUTCD "Work Beyond the Shoulder" for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard plans.

Includes all mobilization, materials, labor, workmanship, supervision, and equipment required for traffic control for temporary pedestrian access reroute. Plans will be submitted to the "Work Requester" ten business days prior to the beginning of work. See UDOT's current Standard Plans and Specifications and the MUTCD "Work Beyond the Shoulder'' for a typical application. A Professional Engineer registered in Utah shall stamp Non-Standard plans.

This item is specific to individual projects. It will be bid separate from this procurement term contract. 3 contractors will be shortlisted to bid.

Requires police department invoice for payment. No mark-ups allowed on this item. 4 hours maximum unless otherwise approved.

Includes all mobilization, furnishing, setup, maintenance, and takedown of a complete advance warning panel. See UDOT’s current Standard Plans and Specifications for Traffic Control. This item is intended as additional warning within a full TC closure or as requested by UDOT. Not to be used under Short-Duration closures. Pre-approval and inspection are required.

Includes all mobilization, furnishing and operation of a truck with UDOT approved attenuator with a certified driver. This item is intended as additional warning within a full TC closure or as requested by UDOT. Not to be used under Short-Duration closures. Pre-approval and inspection are required.

Includes all mobilization, furnishing, setup, maintenance, and takedown of a complete portable VMS. . See UDOT’s current Standard Plans and Specifications for Traffic Control. This item is intended as additional warning within a full TC closure or as requested by UDOT. Not to be used under Short-Duration closures. Pre-approval and inspection are required.

Includes all mobilization, furnishing, setup, maintenance, and takedown of a complete 2 lane setup of rumble strips. UDOT Standard Lane Closure will be paid separately.

Includes all mobilization, labor, signs, devices, and permits for a complete flagging operation. See UDOT’s current Standard Plans and Specifications for Traffic Control. Use of non-certified flaggers will result in no-payment of this item.

Conduit

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish Microduct. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish conduit. Includes all incidental items, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to furnish the conduit. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to provide and install #14 locate wire inside existing conduit including termination to ground rod. Provide 14 AWG, RHH- USE- RHW- 2 stranded copper wire with green insulation.

Includes all mobilization, materials, labor, workmanship, and equipment required to provide and install all detectable pull tape in existing conduit. Install according to UDOT specification section 13553 ITS conduit.

State Furnished Conduit

Includes all mobilization, materials, labor, workmanship, and equipment required to install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to install all conduit. includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to install all conduit. includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Installation

placement up to a 4D, 16-1.25” conduits (or similar product bundle size) Foot

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings. Placement of additional conduit up to a 4D, 16 -1.25” conduits on all trench and Rock Saw line items. To be utilized in conjunction with Line items 37-68 when additional conduit is needed. Includes all mobilization, materials, labor, workmanship, and equipment required to install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ATMS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching. Backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer's installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items. Such as trenching, backfill sand fill 3 inches above the conduit, protection of area prior to the final layer. Warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations . Install according to manufacturer’s installation guide

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items. Such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection or area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to the final layer. Warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to the final layer. Warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor. Workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to the final layer. Warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections , couplings , duct seal, bushings, adapters , and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters and all other materials and labor necessary to complete installations . See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill. Sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as drilling equipment, detectable pull tape, bend sections, couplings, duel seal, bushings, adapters , and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend section, Couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduit. See UOOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings , duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Includes all conduits. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as sand fill to the top of trench, repair of road, protection of area prior to final pavement layer, restriping of pavement, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawing AT6.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as sand fill to the top of trench. Repair of road, protection of area prior to final pavement layer, restriping of pavement. Warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as flowable fill to the top or trench, repair of road, protection of area prior to final pavement layer, restriping of pavement, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UOOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, flowable fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as flowable fill to the top of trench, repair of road, protection of area prior to final pavement layer, restriping of pavement, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations . See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as flowable fill to the top of trench, repair of road, protection of area prior to final pavement layer. Restriping of pavement, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as flowable fill to the top of trench, repair of road, protection of area prior to final pavement layer, restriping of pavement, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. See UDOT specification section 13553 ITS Conduit and Standard Drawings.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install one 30 foot wood pole with riser standoffs and up to two (2) ground anchors. Includes all incidental items such as anchor hardware, bolts and other hardware, excavation, compaction, and all other materials and labor necessary to complete installations for future aerial strand attachment. Aerial strand attachment paid for under separate item.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install one 30 foot wood pole and up to two (2) ground anchors. Includes all incidental items such as bolts and other hardware, excavation, compaction, and all other materials and labor necessary to complete installations for future aerial strand attachment. Aerial strand attachment paid for under separate item.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install a 3/8” steel messenger strand, with aerial 18mm/14mm MD7 microduct lashed. Includes all incidental items such as lashing material, microduct bundle, attachment to existing pole(s), anchors, anchor hardware, attachment hardware, and all other materials and labor necessary to complete installations for aerial strand.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install a 2” galvanized rigid conduit into existing building with up to two (2) NEMA-rated enclosures up to 50 feet total length, and up to two (2) wall cores. Conduit could be installed vertically, horizontally, or a combination of each. Includes all incidental items such as wall coring and sealing, conduit, bends, couplers, bushings, conduit anchors spaced every 5 feet maximum, hardware, detectable pull tape, adapters and all other materials and labor necessary to complete installations.

Proofing and Conduit Repair

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, bushings, adapters and all other materials and labor necessary to complete repair. The unit length of measurement for this item will be 10-foot lengths rounded to the next 10 foot length of conduit actually repaired. Surface restoration will be paid as a separate pay item.

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, bushings, adapters , and all other materials and labor necessary to complete repair. The unit length of measurement for this item will be 10 foot lengths rounded to the next 10 foot length of conduit actually repaired. Surface restoration will be paid as a separate pay item.

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, bushings, adapters, and all other materials and labor necessary to complete repair. The unit length of measurement for this item will be 10 foot lengths rounded to the next 10 foot length of conduit actually repaired. Surface restoration will be paid as a separate pay item.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to furnish and install all conduit. Includes all incidental items such as trenching, backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, duct seal, bushings, adapters, and all other materials and labor necessary to complete installations. Install according to the manufacturer’s installation guide.

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, bushings, adapter, and all other materials and labor necessary to complete repair. The unit length of measurement for this item will be 10 foot lengths rounded to the next 10 foot length of conduit actually repaired. Surface restoration will be paid as a separate pay item.

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer , warning tape, detectable pull tape, bend sections, couplings, bushings, adapters and all other materials and labor necessary to complete repair. The unit length or measurement for this item will be 10 foot lengths rounded to the next 10 foot length of conduit actually repaired. Surface restoration will be paid as a separate pay item.

Includes all mobilization, materials, labor, workmanship, and equipment required to locate and repair all conduit. Includes all incidental items such as backfill, sand fill 3 inches above the conduit, protection of area prior to final layer, warning tape, detectable pull tape, bend sections, couplings, bushings, adapters, and all other materials and labor necessary to complete repair.