CLIN 0003.pdf
PDF 286 KB Posted
- Attached to
- Various Industrial Plant Equipment
- Solicitation number
- 47QSWC25K0038VIPE
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a technical specification sheet for a Toolroom Lathe, Part #3416-211-1018, intended for the United States Air Force (USAF). The lathe specifications include a floor-mounted design with 220V, 3-phase power, hand and power operation, and a geared head. Key technical characteristics include a center-to-center distance of 18 inches, spindle speed range of 125 to 3000 RPM, and a spindle hole diameter of 1.25 inches. The machine measures 71.5 inches in length, 31 inches in width, 72.75 inches in height, and weighs 2250 pounds. The document requires two hard copies and one electronic copy of technical data to be provided, with the electronic package to be shipped to Robins Air Force Base in Georgia. The USAF specifies that the procurement does not include installation, training, tooling, or additional options beyond the standard package.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CLIN 0004.pdf | ||
| CLIN 0002.pdf | ||
| RFI IPE.pdf | ||
| IPE Required.pdf | ||
| CLIN 0001.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Part #3416-211-1018 tem Noun: Lathe, Engine Specifications/Technical
Characteristics:
• Toolroom lathe, floor mounted
• Power: 220 V, 3 phase, 60Hz
• Hand and power operated
• Geared Head
• Center to Center: 18 in
• Spindle Speed: 125 to 3000 RPM
• Spindle hole diameter: 1.25 in
• Swing over bed: 11 in
• Swing over carriage: 9 in
• Swing over cross: 6 in
• Thread quantity range: 11 to 108 per inch
• Dimensions o Length: 71.5 in o Width: 31 in o Height: 72.75 in o Weight 2250 lb
• Additional features or tooling: _______________________
• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
• Shipping address for electronic technical data packages is:
235 Byron Street, (Bldg. 300) Suite 19A Robins AFB, GA 31098-1813
If not specified within the characteristics of the NSN, please provide the following information:
• The existing source power available at the facility is o Volt: __ ______ o Phase: ______ __ o Frequency: _________ Hertz (Hz)
• The machine must fit through a doorway with the following dimensions:
o Width: __ o ___
Height:____
120/208/220/480V 1/2/3 Phase
• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.
o Width: _________ o Length: _________
• If available, a known source for the equipment is __________________________
The USAF does not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.
File details come from the government source that posted it. Updated .