CLIN 0001.pdf
PDF 384 KB Posted
- Attached to
- Various Industrial Plant Equipment
- Solicitation number
- 47QSWC25K0038VIPE
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a detailed specification sheet for a pipe bending machine with part number DSCRJHTB991102, intended for the United States Air Force (USAF). The machine is a manual, floor-mounted hydraulic pipe bending system with a 1.5-inch outer diameter capacity, maximum bend arm movement of 195 degrees, and a maximum over-mandrel tube length of 10 feet. The equipment weighs 900 pounds and includes comprehensive tooling such as 20 mandrels, 6 mandrel rods, 9 clamp blocks, 9 side blocks, a mandrel extractor system, angle bend indicator assembly, hydraulic system, and wrench set.
The specification sheet requires two hard copies and one electronic copy of technical data to be provided, with the electronic package to be shipped to Robins Air Force Base in Georgia. The document emphasizes that the USAF does not include installation, training, tooling, or additional options beyond the standard package. The machine does not require external power and is designed to be manually operated. Potential vendors are expected to provide complete technical details and are advised that this specification represents the base requirements for the equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CLIN 0004.pdf | ||
| CLIN 0002.pdf | ||
| CLIN 0003.pdf | ||
| RFI IPE.pdf | ||
| IPE Required.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Item Noun: pipe bending machine
Specifications/Technical Characteristics:
• Manual bending machine
• Floor mounted
• Hydraulic foot operated manual extractor
• Capacity 1.5 in OD
• Center line radius 6 in max
• Maximum bend arm movement 195°
• Maximum over-mandrel tube length 10 ft
• Machine floor space 12 ft(L) X 40 in(W) X 40 in(H)
• Weight 900 lb
• Tooling:
o 20 mandrels 0.375 to 1.5 in o 6 mandrel rods o 9 clamp blocks 0.375 to 1.5 in o 9 side blocks 0.375 to 1.5 in o Mandel extractor system o Angle bend indicator assembly o Hydraulic system o Wrench set
• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
• Shipping address for electronic technical data packages is:
235 Byron Street, (Bldg. 300) Suite 19A Robins AFB, GA 31098-1813
If not specified within the characteristics, please provide the following information:
• The existing source power available at the facility is
N/A This machine doesn’t require power N/A This machine doesn’t require power o Frequency: N/A This machine doesn’t require power
• The machine must fit through a doorway with the following dimensions:
o Volt:
o Phase:
o Width:
o Height:
Part #DSCRJHTB991102
• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.
o Width:
o Length:
• If available, a known source for the equipment is __________________________
The USAF does not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.
| TRD_NSN_3440014842569_FE442520320075 |
| TRD_NSN_3440014842569_FE481993408002 (003)-Updated |
| TRD_NSN_3440014842569_FE561282480132 |
| TRD_NSN_3440014842569_FE611280300106 - tubing bender |
| TRD_NSN_3440014842569_FE664812770239 |
| Pipe Bending machine_FE302030440059 |
| TRD_NSN_3440014842569_FE520511950005 |
File details come from the government source that posted it. Updated .