CLIN 0002.pdf
PDF 236 KB Posted
- Attached to
- Various Industrial Plant Equipment
- Solicitation number
- 47QSWC25K0038VIPE
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a technical specification sheet for a Flaring and Beading Machine (Part #3CPV) for the United States Air Force (USAF). The machine specifications include pneumatically operated jaws, capabilities for squaring, deburring, flaring, and beading tubes with outer diameters ranging from 0.25 to 3 inches, a variable spindle speed of 300 to 1750 RPM, a 3 HP motor, and air supply requirements of 75-100 PSI. The machine is floor-mounted, includes a cabinet stand with a tooling shelf, and has dimensions of 36 inches long, 26 inches wide, and 46 inches high, weighing 750 pounds. The USAF requires two hard copies and one electronic copy of technical data, to be shipped to 235 Byron Street, (Bldg. 300) Suite 19A, with a noted power source of 220/600 volts, 3-phase, at 50/60 Hz. The specification sheet indicates that PHI Hydraulics is a known source for the equipment, and explicitly states that installation, training, tooling, and additional options are not included in the standard package.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CLIN 0004.pdf | ||
| CLIN 0001.pdf | ||
| CLIN 0003.pdf | ||
| RFI IPE.pdf | ||
| IPE Required.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Item Noun: Flaring and Beading Machine
Specifications/Technical Characteristics:
• Floor mounted
• Pneumatically operated jaws
• Squaring and deburring 0.25 to 3 in OD
• Flaring 0.25 to 3 in OD x 0.125 wt
• Beading 0.25 to 0.375 in OD for 0.035 wt
• Beading 0.5 to 1.5 in OF for 0.065 wt
• Variable spindle speed 300 to 1750RPM
• Motor 3 HP
• Air supply 75-100 PSI required
• Includes cabinet stand with tooling shelf
• Power :
• Dimensions o Length 36 in o Width 26 in o Height 46 in o Weight 750 lb
• Additional features/tooling __________
• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
• Shipping address for electronic technical data packages is:
235 Byron Street, (Bldg. 300) Suite 19A
If not specified in the characteristics please provide the following information:
• The existing source power available at the facility is o Volt: __ __220/600____ o Phase: __3____ __ o Frequency: ____50/60_____ Hertz (Hz)
• The machine must fit through a doorway with the following dimensions:
o Width: ________ o Height: _________
• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.
Part #3CPV o Width: _________ o Length: ________
• If available, a known source for the equipment is ___PHI Hydraulics, 3CPV__________
The USAF does not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.
o
| 3441005288680_FE612291560030.pdf |
| 3441005288680_FE652030180047.pdf |
| 3441005288680_FE638182050105.pdf |
| 3441005288680_FE642341560035.pdf |
| 3441005288680_FE452820390006.pdf |
File details come from the government source that posted it. Updated .