Tab 02. 7510001768019.pdf

ITEM PURCHASE DESCRIPTION 7510-00-176-8019 Ver. 4 UI: RO

General Services Administration 2FY - Offc Supplies & Admin.Services Acq.Center 26 Federal Plaza, Room 19 - 166 New York, NY 10278

7510-00-176-8019 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

I.A.W. 3M PART NUMBER 465 6 IN. OR EQUAL COMMERCIAL

OVERALL WIDTH 6.00 INCHES

OVERALL LENGTH 60.0 YARDS

CORE DIAMETER 3.00 INCHES

OVERALL THICKNESS ANY ACCEPTABLE

OVERALL COLOR COLORLESS

OVERALL MATERIAL PAPER

MATERIAL TRANSPARENCY CLEAR

SURFACE LUSTER LUSTERLESS

ADHESIVE LOCATION ONE SIDE

TEMPERATURE RATING NOT RATED

FEATURES PROVIDED LINER

BIDDING ON:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

SHELF LIFE

Printed on: 04/17/2024 13:01:26 Page 1

2FY - Offc Supplies & Admin.Services Acq.Center 26 Federal Plaza, Room 19 - 166 New York, NY 10278

ITEM: Tapes, Pressure Sensitive, Adhesive Type II: Extendable Age on Delivery: 4 Months Shelf Life Code: 6 (24 Months Extendable Shelf Life)

Tapes shall be delivered within four (4) months after the manufacture date, and have a shelf life of twenty-four (24) months after the manufacture date. After twenty-four (24) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_ MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has

Printed on: 04/17/2024 13:01:26 Page 2

2FY - Offc Supplies & Admin.Services Acq.Center 26 Federal Plaza, Room 19 - 166 New York, NY 10278 approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment.

Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market.

The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall

Printed on: 04/17/2024 13:01:26 Page 3

2FY - Offc Supplies & Admin.Services Acq.Center 26 Federal Plaza, Room 19 - 166 New York, NY 10278 be free from dirt, contamination, mold release compounds, or other foreign matter.

Printed on: 04/17/2024 13:01:26 Page 4