IPD 5436.doc

ITEM PURCHASE DESCRIPTION

General Services Administration

7510-01-652-5436 UI: CS

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

IN ACCORDANCE WITH SAE-AMS-T-22085, TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING

ITEM NAME

TAPE, PRESSURE SENSITIVE ADHESIVE

I.A.W.

TYPE II - FOR USE WITH OR WITHOUT OVERCOATING

3M P/N 481 3 IN.

OVERALL WIDTH

3.000 INCHES

OVERALL LENGTH

36.000 YARDS (per roll)

OVERALL DIAMETER

3.000 INCHES

OVERALL THICKNESS

0.009 INCHES

OVERALL COLOR

BLACK

OVERALL MATERIAL

PLASTIC

SURFACE LUSTER

LUSTERLESS

MATERIAL TRANSPARENCY

OPAQUE

ADHESIVE LOCATION

ONE SIDE

UNIT QUANTITY PACKAGING

12 ROLLS OF TAPE PER CASE

PACKAGING/PACKING: Twelve (12) tapes shall be packaged in a case in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

PACKAGING/PACKING

SHELF LIFE

ITEM: Postage Meter Tape

Type II: Extendable

Shelf Life Code: 6 (24 Months Extendable Shelf Life)

Tapes shall have a shelf life of twenty four (24) months after the manufacture date. After twenty four (24) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each unit package and intermediate container shall be marked with the date of manufacture, and expiration or inspection date, as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

Printed on: 6/28/2018, 9:02:53 AM Page 1

_1126594845.doc