47QSCC20R0001_Amendment_0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Amendment 0001

Solicitation 47QSCC20R0001 is amended as stated on the attached continuation pages.

General Services Administration Federal Acquisition Service Office of Acquisition Management Internal and Emergency Acquisition Division 1800 F Street NW, Washington DC 20405-0001

See block 6

47QSCC20R0001

1 5

10/16/2019

10/01/2019

47QSCC20R0001 AMENDMENT 0001 SF 30 CONTINUATION PAGES

1) SOLICITATION IS AMENDED TO ALLOW MORE PAGES IN THE

PHASE II VOLUME 3 SECTION REQUIREMENT.

a) THE FOLLOWING LANGUAGE IN SECTION 3.5.3.1 IS HEREBY DELETED:

E.3.5.3.1 Volume 3 - Phase II Technical Proposal

NOTE: Volume 3 - Phase II Technical Proposal will only be requested from those offerors that receive notification from the GSA Contracting Officer that their proposal has moved to

Phase II of the evaluation. Offerors will have 14 days following the notification to submit

Volume 3, following notification from the GSA Contracting Officer.

Page Limitation: Volume 3 consists of a Live Test Demonstration (LTD) outline and

Performance Work Statement (PWS). The page limitations for Volume 3 are no more than 3 pages for the LTD outline and no more than 10 pages for the PWS. A further page limitation breakdown for the PWS is included in the content section below. Any pages exceeding the page limitations will not be reviewed. A table of contents should be included as Tab 1, but will not be counted in the page limitation.

Content: Volume 3 shall include only the technical information described below. Volume 3 must include a table of contents and must fully address the technical factors listed below.

Failure to address any factor within a proposal may result in a determination by the CO that the proposal is non-responsive and the proposal may be removed from further consideration.

The factors directly correlate to the evaluation criteria outlined in the solicitation.

Volume 3 – Phase II Technical Proposal

Tab 1 Table of Contents

Tab 2 LTD Outline

Tab 3 Factor 3 Performance Work Statement

Table of Contents and LTD Outline

The Phase II Technical Proposal shall include a table of contents for Volume 3 (Tab 1) and an outline for the LTD (Tab 2). There is no page limitation for the table of contents. The

LTD outline shall be no more than 3 pages and shall summarize the contents of the LTD.

Factor 3 - Performance Work Statement

In response to this factor, offerors shall provide a complete Performance Work Statement

(PWS) that meets the Government’s requirements. The PWS will be incorporated into the contract. The PWS shall demonstrate the offeror’s understanding of, and ability to meet the

Government’s requirements as stated in the Statement of Objectives, at Attachment 3 to the solicitation.

The PWS shall specifically address and describe the offeror’s plan and approach for meeting the Government’s requirements in the following focus areas, as outlined in the noted sections of the Statement of Objectives, within the page limitations specified below:

Focus Area Section in SOO (Attachment 3) Page Limit

Supply chain risk management

4.B.(ii) Supply Chain Risk Management and 3rd Party Supplier Management Up to 3 pages

Mandatory sources (e.g.

AbilityOne and Federal

Prison Industries) and small business

4.B.(iii) Small Business Identification

4.B.(iv) AbilityOne and ‘Essentially the

Same’ Items

4.B.(v) Federal Prison Industries

Up to 1 page

Cybersecurity 4.B.(vii) Cybersecurity Capabilities Up to 2 pages

Data Capabilities

4.C.(i) Spend Data and Analytics

4.C.(ii) Data Extracts

4.C.(iii) Data Analytics

4.C.(v) Data Security and Protections -

Restrictions on Contractor’s Use of Data

Up to 3 pages

Fee Remittance 4.D.(iv) Fee Remittance Up to 1 page

In the PWS, the offeror shall also describe the quality assurance processes it has in place related to IT and cybersecurity concerns and supply chain risk management, to include the prohibitions outlined in Section 889 of the John S. McCain National Defense Authorization

Act (NDAA) of Fiscal Year 2019.

b) THE FOLLOWING LANGUAGE IS HEREBY INSERTED. Note: changes are underlined and bolded for clarity purposes only. This formatting is not included in the solicitation.

E.3.5.3.1 Volume 3 - Phase II Technical Proposal

NOTE: Volume 3 - Phase II Technical Proposal will only be requested from those offerors that receive notification from the GSA Contracting Officer that their proposal has moved to

Phase II of the evaluation. Offerors will have 14 days following the notification to submit

Volume 3, following notification from the GSA Contracting Officer.

Page Limitation: Volume 3 consists of a Live Test Demonstration (LTD) outline and

Performance Work Statement (PWS). The page limitations for Volume 3 are no more than 3 pages for the LTD outline and no more than 14 pages for the PWS. A further page limitation breakdown for the PWS is included in the content section below. The below page breakdown limits the focus areas to a total of 10 pages and the offeror may use the additional 4 pages to address other areas. Any pages exceeding the page limitations will not be reviewed. A table of contents should be included as Tab 1, but will not be counted in the page limitation.

Content: Volume 3 shall include only the technical information described below. Volume 3 must include a table of contents and must fully address the technical factors listed below.

Failure to address any factor within a proposal may result in a determination by the CO that the proposal is non-responsive and the proposal may be removed from further consideration.

The factors directly correlate to the evaluation criteria outlined in the solicitation.

Volume 3 – Phase II Technical Proposal

Tab 1 Table of Contents

Tab 2 LTD Outline

Tab 3 Factor 3 Performance Work Statement

Table of Contents and LTD Outline

The Phase II Technical Proposal shall include a table of contents for Volume 3 (Tab 1) and an outline for the LTD (Tab 2). There is no page limitation for the table of contents. The

LTD outline shall be no more than 3 pages and shall summarize the contents of the LTD.

Factor 3 - Performance Work Statement

In response to this factor, offerors shall provide a complete Performance Work Statement

(PWS) that meets the Government’s requirements. The PWS will be incorporated into the contract. The PWS shall demonstrate the offeror’s understanding of, and ability to meet the

Government’s requirements as stated in the Statement of Objectives, at Attachment 3 to the solicitation.

The PWS shall specifically address and describe the offeror’s plan and approach for meeting the Government’s requirements in the following focus areas, as outlined in the noted sections of the Statement of Objectives, within the page limitation of 14 pages in total. Please note that the offeror is not limited to only the focus areas listed below but the overall PWS page limitation remains at 14 pages.

Focus Area Section in SOO (Attachment 3) Page Limit

Supply chain risk management

4.B.(ii) Supply Chain Risk Management and 3rd Party Supplier Management

Mandatory sources (e.g. 4.B.(iii) Small Business Identification Up to 1 page

AbilityOne and Federal

Prison Industries) and small business

4.B.(iv) AbilityOne and ‘Essentially the

Same’ Items

4.B.(v) Federal Prison Industries

Cybersecurity 4.B.(vii) Cybersecurity Capabilities Up to 2 pages

Data Capabilities

4.C.(i) Spend Data and Analytics

4.C.(ii) Data Extracts

4.C.(iii) Data Analytics

4.C.(v) Data Security and Protections -

Restrictions on Contractor’s Use of Data

Fee Remittance 4.D.(iv) Fee Remittance Up to 1 page

In the PWS, the offeror shall also describe the quality assurance processes it has in place related to IT and cybersecurity concerns and supply chain risk management, to include the prohibitions outlined in Section 889 of the John S. McCain National Defense Authorization

Act (NDAA) of Fiscal Year 2019.

END OF CONTINUATION PAGES