47QACA26Q0391_R1_RFQ_PipeBendingMachines_2026-08-10.pdf

Solicitation Number: 47QACA26Q0391_R1 Issuance Date: August 10, 2026 Revised Closing Date/Time: August 26, 2026, 2:00 pm ET Procurement Method: Combined FAR Part 12 & FAR Part 13 (Over SAT / Under $9,000,000) This is a Total Small Business Set-Aside

1. Requisition & Acquisition Description

This is a combined synopsis/solicitation for commercial pipe bending machines prepared in accordance with the Revolutionary FAR Overhaul (RFO) framework under FAR Parts 12 and 13. This announcement constitutes the only solicitation.

Solicitation number 47QACA26Q0391_R1 is issued as an RFQ for pipe bending machines to ensure the AFLCMC is able to shape pipes and tubes into desired angles and curves without compromising strength or structure.

(Reference attachment 1 for salient characteristics) (Reference attachment 2 for technical matrix)

This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

2. Schedule of Supplies

CLIN Description Quantity Unit of measure Type

0001 Pipe Bending Machines

3 EA Product

0002 Shipping/Freight 1 EA N/A

(Reference attachment 3 for pricing spreadsheet)

The North American Industry Classification System code (NAICS) and Product Service Code (PSC) code applicable to this requirement are as follows:

NAICS – 333517 (Machine Tool Manufacturing) PSC Code – 3441 (Bending and Forming Machines)

3.Packaging and marking

ALL PACKAGES AND SHIPMENTS MUST COMPLY WITH THE FOLLOWING REQUIREMENTS:

Item 0001 - Preservation, packaging and packing shall conform to prevailing industry standards (ASTM-D-3951) for the type of commodity purchased under this contract. All packages shall be clearly marked with applicable contract numbers and will contain appropriate packing slips.

Marking: Shipments to the Department of Defense (DoD) shall be marked in accordance with

MIL-STD-129.

Special Marking: In addition to markings required by MIL-STD-129, shipments shall be marked with the requisition number, part number, SUPPAD and item name (will be shown on individual orders).

http://www.acquisition.gov/

Preparation for Delivery: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier.

Ready for Shipment: Whenever components are ready to ship, the following documentation shall be uploaded via the Collaboration tool in ASSIST:

● Shipper, shipment tracking number, estimated delivery date

● Purchase Invoice (.pdf)

● Packing List (.pdf) o Shipper, shipment tracking number, estimated delivery date o Purchase Invoice (.pdf) o Packing List (.pdf)

4. Delivery & Performance Terms

Shipping and Handling Terms: f.o.b. point is Destination. Inspection and acceptance will occur at Destination for all products provided under this contract. The delivery period shall not exceed 365 days after contract award.

(Reference attachment 4 for delivery location)

5. A list of solicitation provisions that apply to the acquisition (see 12.205(a)).

[X] 52.203-11: Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (SEP 2024)

[X] 52.203-18: Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (JAN 2017)

[X] 52.204-7: System for Award Management—Registration (JUL 2026)

☐ 52.204-7 with Alt I: System for Award Management—Registration, with Alternate I

(JUL 2026)

☐52.204-90: Offeror Identification (JUL 2026)

(c) Taxpayer identification. The Offeror shall provide with its offer the following information that is necessary to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d);

reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M; and the implementing IRS regulations:

(1)Taxpayer identification number (TIN)

☐TIN: ;

☐TIN has been applied for; or

☐TIN is not required because:

☐ Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;

☐Offeror is an agency or instrumentality of a foreign government; or

☐Offeror is an agency or instrumentality of the Federal Government.

(2)Type of organization

☐Sole proprietorship;

☐Partnership;

☐Corporate entity (not tax-exempt);

☐Corporate entity (tax-exempt);

☐Government entity (Federal, State, or local);

☐Foreign government;

☐International organization per 26 CFR 1.6049-4; or

☐Other.

(3)Common parent

☐ Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision; or

☐ Name and TIN of common parent: Name:

TIN:

(d)Commercial and Government Entity (CAGE) code.

(1) The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its offer. The CAGE code shall be for that name and location address. Insert the word “CAGE” before the code. The Offeror may obtain a CAGE code as indicated in the following table.

If the Offeror is…… Then…..

Located in the United States or its outlying areas Submit a request to the DLA CAGE Branch via https://cage.dla.mil

Located outside the United States and its outline areas and its country is a member of the North Atlantic Treaty Organization (NATO) or a sponsored nation

Contact the appropriate National Codification Bureau (https:///www.nato.int/structur/ac/135/about/contacts)

Located outside the United States and its outlying areas and its country is not a member of NATO or a sponsored nation

Contact the NATO Support and Procurement Agency

(NSPA)

(https://eportal.nspa.nato.int/AC135Public/scage/CageLi st.aspx)

(2) The Offeror shall provide the CAGE code and legal business name (Do not use a “doing business as” name) for— (i)Its immediate owner(s), if any;

(ii)Its highest-level owner, if any; and

(iii) Any predecessor(s), or predecessor of an Offeror’s predecessor, that held a Federal contract or grant within the last three years.

Owner type CAGE code Legal business name

Immediate owner

Highest-level owner

Predecessor*

*Predecessor CAGE code may be marked “Unknown.”

(3) If the Offeror has more than one immediate owner (such as a joint venture), give the information for each owner (or joint venture participant). If the Offeror has more than one predecessor, provide information for each predecessor in reverse chronological order.

☐ 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) (AUG 2024)

☐52.209-12 Certification Regarding Tax Matters (OCT 2025)

(1)Has ☐ filed all Federal tax returns required during the three years preceding the certification;

(2) Has not ☐ been convicted of a criminal offense under the Internal Revenue Code of 1986;

and

(3) Has not ☐, more than 90 days prior to certification, been notified of any unpaid Federal tax assessment for which the liability remains unsatisfied, unless the assessment is the subject of an https://cage.dla.mil/ https://www.nato.int/structur/ac/135/about/contacts) https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx installment agreement or offer in compromise that has been approved by the Internal Revenue Service and is not in default, or the assessment is the subject of a non-frivolous administrative or judicial proceeding.

[X] 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.

(JUL 2026)

[X] 52.212-2: Evaluation—Commercial Products and Commercial Services. (JUL 2026)

(a)An Evaluation Plan is not required since it will be a lowest price initial selection, then on a Pass/Fail basis. This procurement is prepared in accordance with FAR Parts 12 and 13.

(b) Offerors must submit a price quote for ALL items listed in this procurement to be eligible for an award. The Government will evaluate Offeror’s Quotes to ensure pricing is provided and is fair and reasonable for all required items identified in attachments 1 & 3 of this RFQ and meet or exceed the requested delivery dates. Pricing must be submitted for all items to be considered for award. Offeror is required to fill out the technical matrix and provide supporting literature to illustrate that their products meet all the requirements listed in the Product Description and are able to meet or exceed the 365 days ARO.

(c) INFORM 2.0 Procedures: Is NOT required. This procurement is below the current $10M threshold and the Source Selection Procedures are LPTA source selection. This acquisition is exempt from Section 508 requirement as this requirement is not for IT.

☐52.219-2 Equal Low Bids (JUL 2026)

☐ 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products

(FEB 2021)

(b) Listed end products. The following end product(s) being acquired under this solicitation is (are) included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, identified by their country of origin. There is a reasonable basis to believe that listed end products from the listed countries of origin may have been mined, produced, or manufactured by forced or indentured child labor.

Listed End Product Listed Countries of Origin

(c) Certification. The Government will not make award to an offeror unless the offeror, by checking the appropriate block, certifies to either paragraph (c)(1) or paragraph (c)(2) of this provision.

☐ (1) The offeror will not supply any end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in a corresponding country as listed for that end product.

☐ (2) The offeror may supply an end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.

The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture such end product. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

☐ 52.222-48 Exemption from Application of the Service Contract Labor Standards for Maintenance, Calibration, or Repair of Certain Equipment–Certification (JUL 2026)

(a) The offeror must check the following certification:

Certification

The offeror □ does □ does not certify that-

☐ 52.222-52 Exemption from Application of the Service Contract Labor Standards for Certain Services-Certification (JUL 2026)

(a) The offeror must check the following certification:

Certification

The offeror □ does □ does not certify that-

☐52.222-56 Certification Regarding Trafficking in Persons Compliance Plan (JUL 2026)

☐ 52.223-4 Recovered Material Certification (MAY 2008)

[X] 52.225-2 Buy American Certificate (Oct 2022)

(b) Foreign End Products:

Line Item No. Country of origin Exceeds 55% domestic content (yes/no)

☐52.225-4 Buy American-Free Trade AgreementsIsraeli Trade Act Certificate (JUL 2026)

☐52.225-6 Trade Agreements-Certificate (FEB 2021)

☐ 52.225-20 Prohibition on Conducting Restricted Business Operations in Sudan Certification (JUL 2026)

☐ 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to IranRepresentation and Certifications (JUL 2026)

☐52.226-3 Disaster or Emergency Area Representation (NOV 2007)

[X] 52.229-11 Tax on Certain Foreign Procurements— Notice and Representation (JUL 2026)

[X] 52.240-90 Security Prohibitions and Exclusions Representations and Certification(JUL2026)

(End of provisions)

6. A list of contract clauses that apply to the acquisition (see 12.205(b)).

[X] 52.203-6 with Alt I Restrictions on Subcontractor Sales to the Government (NOV 2021)

☐52.203-13 Contractor Code of Business Ethics and Conduct (NOV 2021)

☐52.203-17 Contractor Employee Whistleblower Rights (NOV 2023)

[X] 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

☐ 52.204-9 Personal Identity Verification of Contractor Personnel (JAN 2011)

[X] 52.204-13 System for Award Management— Maintenance (JUL 2026)

☐ 52.204-91 Contractor identification (JUL 2026)

[X] 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (JUL 2026)

☐ 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (JUL 2026)

[X] 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (JUL 2026)

[X] 52.212-4: Contract Terms and Conditions—Commercial Products and Commercial Services.

(JUL 2026)

☐ 52.212-4 with Alt I: Contract Terms and Conditions—Commercial Products and Commercial Services. (JUL 2026)

☐ 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JUL 2026)

[X] 52.219-6 Notice of Total Small Business SetAside (JUL 2026)

☐52.219-6 with Alt I Notice of Total Small Business SetAside, with Alternate I (MAR 2020)

[X] 52.219-8 Utilization of Small Business Concerns (JUL 2026) ☐52.219-9 Small Business Subcontracting Plan (JUL 2026)

☐52.219-9 with Alt I Small Business Subcontracting Plan, with Alternate I (JUL 2026)

☐52.219-9 with Alt II Small Business Subcontracting Plan, with Alternate II (JUL 2026)

☐52.219-9 with Alt III Small Business Subcontracting Plan, with Alternate III (JUL 2026)

☐52.219-9 with Alt IV Small Business Subcontracting Plan, with Alternate IV (JUL 2026)

[X] 52.219-14 Limitations on Subcontracting (JUL 2026) ☐ 52.219-16 Liquidated Damages—Subcontracting Plan (JUL 2026)

[X] 52.219-33 Nonmanufacturer Rule (JUL 2026)

[X] 52.222-3 Convict Labor (JUL 2026)

[X] 52.222-19 Child Labor—Cooperation with Authorities and Remedies (JUL 2026)

[X] 52.222-35 Equal Opportunity for Veterans (JUL 2026) ☐52.222-35 with Alt I Equal Opportunity for Veterans, with Alternate I (JUL 2026)

[X] 52.222-36 Equal Opportunity for Workers with Disabilities (JUL 2026)

☐52.222-36 with Alt I Equal Opportunity for Workers with Disabilities, with Alternate I

(JUL 2014)

[X] 52.222-37 Employment Reports on Veterans (JUL 2026)

[X] 52.222-40 Notification of Employee Rights Under the National Labor Relations Act

(JUL 2026)

☐52.222-41 Service Contract Labor Standards (JUL 2026)

☐52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2024)

Employee Class Monetary wage - fringe benefits

☐ 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (JUL 2026)

☐ 52.222-44 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (JUL 2026)

[X] 52.222-50 Combating Trafficking in Persons (JUL 2026)

☐52.222-50 with Alt I Combating Trafficking in Persons, with its Alternate I (JUL 2026)

Document Title Document may be obtained from Applies to performance in/at:

☐ 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment— Requirements (JUL 2026)

☐ 52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services— Requirements (JUL 2026)

☐ 52.222-54 Employment Eligibility Verification (JUL 2026)

☐ 52.222-62 Paid Sick Leave Under Executive Order 13706 (JUL 2026)

[X] 52.222-90 Addressing DEI Discrimination by Federal Contractors (JUL 2026)

☐ 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items

(MAY 2008)

☐ 52.223-9 with Alt I Estimate of Percentage of Recovered Material Content for EPA-Designated Items, with Alternate I (MAY 2008)

☐ 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUL 2026)

☐ 52.223-12 Maintenance (JUL 2026)

☐ 52.223-20 Aerosols Statute (JUL 2026)

☐ 52.223-21 Foams (JUL 2026)

[X] 52.223-23 Sustainable Products and Services (JUL 2026) ☐ 52.224-3 Privacy Training (JAN 2017)

☐ 52.224-3 with Alt I Privacy Training, with Alternate I (JAN 2017)

[X] 52.225-1 Buy American-Supplies (JUL 2026)

☐ 52.225-1 with Alt I Buy American-Supplies, with Alternate I (OCT 2022)

☐ 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act (JUL 2026)

☐ 52.225-3 with Alt II Buy American-Free Trade AgreementsIsraeli Trade Act, with Alternate

II (JUL 2026)

☐ 52.225-3 with Alt III Buy American-Free Trade AgreementsIsraeli Trade Act, with Alternate

III (JUL 2026)

☐ 52.225-3 with Alt IV Buy American-Free Trade AgreementsIsraeli Trade Act, with Alternate

IV (JUL 2026)

☐ 52.225-5 Trade Agreements (NOV 2023)

☐ 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States (MAY 2020)

☐ 52.225-26 Contractors Performing Private Security Functions Outside the United States

(OCT 2016)

☐ 52.226-4 Notice of Disaster or Emergency Area Set-Aside (NOV 2007)

☐ 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area (JUL 2026)

[X] 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (MAY 2024) ☐ 52.229-12 Tax on Certain Foreign Procurements (JUL 2026)

☐ 52.232-29 Terms for Financing of Commercial Products and Commercial Services

(NOV 2021)

☐ 52.232-30 Installment Payments of Commercial Products and Commercial Services (NOV 2021)

[X] 52.232-33 Payment by Electronic Funds Transfer —System for Award Management

(OCT 2018)

☐ 52.232-34 Payment by Electronic Funds Transfer —Other than System for Award Management (JUL 2013)

☐52.232-36 Payment by Third Party (JUL 2026)

[X] 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (MAR 2023)

☐ 52.232-90 Fast Payment Procedure (JUL 2026)

[X] 52.233-3 Protest After Award (JUL 2026)

[X] 52.233-4 Applicable Law for Breach of Contract Claim (JUL2026) �

[X] 52.240-91 Security Prohibitions and Exclusions (JUL 2026)

☐52.240-91 with Alt I Security Prohibitions and Exclusions, with Alternate I (e)(1) (JUL 2026)

☐Yes; ☐ No; ☐ DHS FASCSA order ☐Yes; ☐ No; ☐ DoD FASCSA order ☐Yes; ☐ No; ☐ DNI FASCSA order

☐52.240-92 Security Requirements (JUL 2026)

☐52.240-92 with Alt II Security Requirements with Alternate II (JUL 2026)

☐ 52.240-93 Basic Safeguarding of Covered Contractor Information Systems (JUL 2026)

[X] 52.244-6 Subcontracts for Commercial Products and Commercial Services (JUL 2026)

☐52.247-64 Preference for Privately Owned U.S.- Flag Commercial Vessels (JUL 2026)

☐ 52.247-64 with Alt I Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate I (APR 2003)

☐ 52.247-64 with Alt II Preference for Privately Owned U.S.-Flag Commercial Vessels, with Alternate II (NOV 2021) (JUL 2026)

(End of clauses)

7. The Government will evaluate Offeror’s Quotes to ensure pricing is provided and is fair and reasonable for all required items identified in attachments 2 & 3 of this RFQ and meet or exceed the requested delivery dates.

The Government will make an award representing the best interest to the Government considering:

Lowest Price Technically Acceptable (LPTA). All quotes received will be ranked by aggregate price with the lowest price first. The vendor with the lowest total aggregate price will have its technical package evaluated first, with a pass/fail evaluation against the requirements identified in FAR 52.212-2 of this RFQ.

While past performance is not a formal evaluation factor for this procurement, the CO will review the Exclusions and Responsibility/Qualification Reports available within the System for Award Management (SAM) (https://sam.gov). Additionally, the Government reserves the right to review Performance and Integrity Records, available within the Contractor Performance Assessment Reporting System (CPARS) (https://www.cpars.gov/).

GSA will be responsible for contract administration, including payment and closeout. The GSA administrative point of contact is:

GSA Contracting Officer:

Melissa Martel Office of Centralized Acquisition Service Center 4 - Division 1 Email: melissa.martel@gsa.gov

When responding to this RFQ, complete and sign the entire package along with the required supplemental documentation and submit your Quote package as an attachment via email to Melissa Martel, Contracting Officer at melissa.martel@gsa.gov not later than the closing date of the solicitation.

A complete Quote consists of the following:

Completed Attachment 2 – Technical Matrix Pipe Bending Completed Attachment 3 – Pricing Spreadsheet_ Pipe Bending

All quotes and supporting documentations shall be submitted via email to the GSA Contracting Officer. RFQ and supporting documentation are due NOT LATER THAN August 26, 2026 2:00pm ET.

Facsimile (fax) quotes will not be accepted

Mail-in quotes will not be accepted

8. Additional information

Offeror must be registered in GSA’s ASSIST System.

If an offeror is not registered in ASSIST, they must be registered prior to contract award.

Instructions for registering in ASSIST can be found in attachment 4 of this solicitation.

(Reference attachment 5 for ASSIST registration instructions)

9. List of attachments

Attachment 1 – Salient Characteristics Type: Informational Requirement: These are essential physical, functional, or performance characteristics of a commercial product that must be met to be considered an equal product.

Attachment 2 – Technical Matrix Type: Returnable Requirement: Check "Comply" or "Exception" for every technical specification.

https://sam.gov/ https://www.cpars.gov/) mailto:melissa.martel@gsa.gov mailto:melissa.martel@gsa.gov

Attachment 3 – Pricing Spreadsheet Type: Returnable Requirement: All white cells must be filled with unit and total costs for every CLIN.

Attachment 4 – Pipe Bending Shipping Locations Type: Informational Requirement: Use these delivery addresses to calculate your final shipping costs.

Attachment 5 - ASSIST Registration Instructions Type: Informational Requirement: Use these steps to download the military specs required for the pipe bending machines.

End of RFQ

NSN#: 3441014842569

Item Noun: pipe bending machine

Specifications/Technical Characteristics:

• Manual bending machine

• Self-contained (no outside power source)

• Floor mounted

• Hydraulic foot operated manual extractor

• Direction of bend: clockwise and couter-clockwise

• Capacity 1.5 in OD

• Center line radius 8 in max

• Maximum bend arm movement 195°

• Maximum over-mandrel tube length 10 ft

• Tooling: (see attached tooling sheet for exact specifications for tooling requried) o 25 Bend Die 0.375 to 1.5 in (see attached tooling sheet) o 6 mandrel rods o 9 clamp die 0.375 to 1.5 in o 9 pressure die 0.375 to 1.5 in o Mandel extractor system o Angle bend indicator assembly

• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.

• Shipping address for electronic technical data packages is:

Attn: Bob Diamond, Equip. Specialist 235 Byron Street, (Bldg. 300) Suite 19A Robins AFB, GA 31098-1813

If not specified within the characteristics of the NSN, please provide the following information:

• The existing source power available at the facility is o Volt: __ N/A______ o Phase: __N/A____ __ o Frequency: __N/A_______ Hertz (Hz)

• The machine must fit through a doorway with the following dimensions:

o Width: ___12’ FT______ o Height: ___ ______

• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.

o Width: ___

47QACA26Q0391 - Attachment 1 o Length: _

Note 1: This will be an open competitive competition and the source of supply will not be determined until the vendor quotes and technical acceptability is reviewed by the contracting agency.

Note 2: We the USAF do not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.

47QACA26Q0391_Attachment 2_Technical Matrix Pipe Bending Machine

The required characteristics are listed in the first column. Vendors shall insert their offered characteristics in the second column along with specifying whether quoter meets, does not meet or exceeds the required characteristic and identify in the third column where in the descriptive literature/reference material those characteristics are shown as evidence of meeting the required specification. This is for the Pipe Bending Machine.

This chart shall be completed by the QUOTER. All entries to this chart shall be typed. The chart will be used to evaluate your offer to determine the acceptability Pass/Fail of the Pipe Bending. Attached product descriptive literature (see Clause 52.214-21, Descriptive Literature, for additional information).

MINIMUM SPECIFICATIONS/CHARACTERISTIC

NOTE: (!!! CHANGING ANY INFORMATION IN THIS

COLUMN WILL INVALIDATE YOUR OFFER!!!!!)

QUOTER'S

SPECIFICATION/CHARACTERISTIC

(Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement.

QUOTER'S DESCRIPTIVE

LITERATURE REFERENCE

(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)

Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)

Note: Quoters leave blank

Manual bending machine

Floor mounted

Hydraulic foot operated manual extractor

Capacity 1.5 in OD

Center line radius 8 in max

Maximum bend arm movement 195°

Maximum over-mandrel tube length 10 ft

Machine floor space 12 ft(L) X 40 in(W) X 40 in (H)

Weight 900 lb.

47QACA26Q0391_Attachment 2_Technical Matrix Pipe Bending Machine

MINIMUM SPECIFICATIONS/CHARACTERISTIC

NOTE: (!!! CHANGING ANY INFORMATION IN THIS

COLUMN WILL INVALIDATE YOUR OFFER!!!!!)

QUOTER'S

SPECIFICATION/CHARACTERISTIC

(Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement.

QUOTER'S DESCRIPTIVE

LITERATURE REFERENCE

(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)

Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)

Note: Quoters leave blank

Tooling:

o 20 mandrels 0.375 to 1.5 in o 6 mandrel rods o 9 clamp blocks 0.375 to 1.5 in o 9 side blocks 0.375 to 1.5 in o Mandel extractor system o Angle bend indicator assembly o Hydraulic system o Wrench set

Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.

After Receipt of Order (ARO) 365 Days

47QACA26Q0391 - Attachment 3 - Pipe Bending Machines

Item # Item Description Part Number U/I Qty

Quoted Price

Unit Price Extended Price Country of Origin

Delivery

ARO

Historical Pricing Each Freight Pricing

0001 Pipe Bending Machines EA 13 ($ ) ($ )

0002 Freight/Shipping EA 1 ($ ) ($ )

Aggregated Price: ($ )

P/N NSN Document # Qty Nomenclature Ship To Ultimate Ship To POC

DSCRJHTB991102 3441014842569 FE302030440059 1 Pipe Bending Machine N/A

FE3020 82 LS LGSS

CP 940 676 5297

1231 BRIDWELL RD BLDG 2113

SHEPPARD AFB TX 76311

Leslie Healton

DSN: 736-6334

Email: Leslie.healton.ctr@us.af.mil

DSCRJHTB991103 3441014842569 FE705090083405 1 Pipe Bending Machine

FY9150 60 APS TRK INTRANSIT

CARGO CP 707 424 3992 90

RAGSDALE ST BLDG 977

TRAVIS AFB CA 94535-2631

FE5270 18 LRS LGRDDC

CP 011 81 98 938 1111 EXT 634

KADENA AB BLDG 794 DOUGLAS

BLVD

KADENA AB JP 904 0200

SSGT NYLE BURGESS - NYLE.

BURGESS@US.AF.MIL

DSCRJHTB991104 3441014842569 FE705041843202 1 Pipe Bending Machine N/A

FE6032 188 FW LRSPE

CP 479 573 5254

4850 LEIGH AVE BLDG 108

FORT SMITH AR 72903

MSGT BRIAN A PATT - BRIAN.

PATT@US.AF.MIL/ SSgt Dana B Petty -

DANA.PETTY.1@US.AF.MIL

DSCRJHTB991105 3441014842569 FE705011953404 1 Pipe Bending Machine

FY9150 60 APS TRK INTRANSIT

CARGO CP 707 424 3992

90 RAGSDALE ST BLDG 977

TRAVIS AFB CA 94535-2631

FE5205 35 LRS LGRD

CP 011 81 176 77 3166

MISAWA AB BLDG 1334

MISAWA AB AOMORI KEN JP 033

SSgt. Morgan Wilem Oira-Bautista Email: morgan_willem.oira-bautista@us.

af.mil

DSN: 226-4779

Commercial: +81 080-555-20460

DSCRJHTB991106 3441014842569 FE705031883301 1 Pipe Bending Machine

FY9125 436 APS TRTC CP 302-

677-2317 550 ATLANTIC ST

BLDG 550 DOVER AFB DE

19902-5061

FE5682 31 FW LGTT

CP 011 39 0434 66 8535 OR 4121

HANGAR 3 TRANSPORTATION

OFFICE

33081 AVIANO AB IT

LT COL D''AGOSTINO, LISANDRA -

LISANDRA.DAGOSTINO@US.AF.MIL /

SSGT MIRANDA, LUDWIG - LUDWIG.

MIRANDA@US.AF.MIL

DSCRJHTB991107 3441014842569 FE705022653405 1 Pipe Bending Machine

FY9150 60 APS TRK INTRANSIT

CARGO CP 707 424 3992 90

RAGSDALE ST BLDG 977

TRAVIS AFB CA 94535-2631

FE5294 51 LRS LGRMCE

CP 011 82 505 784 5085

OSAN AB BLDG 824 SINJANG

DONG

PYEONGTAEK CITY KR 17759

LT COL EVIN GREENSFELDER - EVIN.

GREENSFELDER@US.AF.MIL

DSCRJHTB991108 3441014842569 FE705080303203 1 Pipe Bending Machine N/A

FE6112 124 FW LRS TMO

CP 208 422 5877

4460 S BYRD ST BLDG 503

BOISE ID 83705

TSgt. Mitchell Burley Commercial: 208-422-5697

DSN: 422-5697

Email: mitchell.burley@us.af.mil

DSCRJHTB991109 3441014842569 FE705041650013 1 Pipe Bending Machine N/A

FE4528 5 LRS LGRMR

CP 701 723 3363

341 BOMBER BLVD BLDG 527

MINOT AFB ND 58705

SSGT REACH, BENJAMIN - BENJAMIN.

REACH@US.AF.MIL / SSGT Ives, Douglas - DOUGLAS.IVES.5@US.AF.

MIL

DSCRJHTB991110 3441014842569 FE705042140010 1 Pipe Bending Machine N/A

FE6281 152 AW LGS

CP 775 788 4671

1776 NATIONAL GUARD WAY

RENO NV 89502

CRUZE, SHAUN - SHAUN.CRUZE.

1@US.AF.MIL

DSCRJHTB991111 3441014842569 FE481993408002 1 Pipe Bending Machine N/A

FE4819 325 LRS LRDS

CP 850 283 9332

995 BEACON BEACH RD

TYNDALL AFB FL 32403

James Cato Commercial: 850-283-8240

DSN: 523-8240

Email: james.cato.1.ctr@us.af.mil

DSCRJHTB991112 3441014842569 FE705020323004 1 Pipe Bending Machine N/A

FE4425 11 LRS TWS

CP 301 981 2505

3066 E PERIMETER RD

JB ANDREWS MD 20762

MSgt. Stephen Burns Commercial: 240-857-2433

DSN: 857-2433

Email: Stephen.Burns.9@us.af.mil

DSCRJHTB991113 3441014842569 FE705082483302 1 Pipe Bending Machine

FY9125 436 APS TRTC CP 302-

677-2317 550 ATLANTIC ST

BLDG 550 DOVER AFB DE

19902-5061

FE5612 86 LRS LGRDD

CP 011 49 637 147 2303

TMO RAMSTEIN FLUGPLATZ

BLDG 2127

66877 RAMSTEIN

MIESENBACH DE

TSgt. Adam Reicks/SSgt. Zachary Teeters Commercial: +49-06371-472873

DSN: 480-0882

Email: adam.reicks@us.af.mil/zachary.

teeters@us.af.mil

DSCRJHTB991114 3441014842569 FE705043440039 1 Pipe Bending Machine N/A

FE2520 45 LRS LGRDDC

CP 321 494 4751

972 S PATRICK DR BLDG 822

PATRICK SFB FL 32925

LT COL, RANSIER, BETHANY -

BETHANY.RANSIER@US.AF.MIL /

TSGT, ALBARRACIN, JOSHUA -

JOSHUA.ALBARRACIN@US.AF.MIL

Overview

This document describes how to create an ASSIST account as a contractor user, including setting up the FAS ID (if needed) and linking to the appropriate company(s). The process to register a contractor user is a self-registration process.

Before You Begin

Make sure you have:

A valid email address Your company name or Unique Entity Identifier (UEI) Basic company contact information

Understanding FAS ID

A FAS ID is your secure login credential that works across multiple GSA applications. FAS ID ensures compliance with GSA's identity, credentials, and access management controls. It achieves this by offering multi-factor authentication and a self-service account recovery option.

Step 1. Access the ASSIST Login Page

Navigate to the ASSIST Homepage and select the 'Create account' button.

https://assist.gsa.gov/public/login

Step 2. Accept Terms

Review the system notice and select the 'I agree to the terms' button.

Step 3. Select the 'Contractor' Account Type and then click 'Continue'

Step 4. Enter your email address on the Account Check page

Once you have entered your email address, select the 'Search' button. ASSIST will check if you already have:

An ASSIST account

A FAS ID

Note: The validation process for a contractor user's account yields four potential account check messages, each leading to a specific registration path.

Step 5. Registration Path

Based on the results of the Account Check, ASSIST will guide the user through the appropriate registration process:

1. If you have BOTH a FAS ID and ASSIST account:

Log in with your FAS ID No ASSIST registration needed

2. If you have NEITHER:

Create a FAS ID Complete the ASSIST registration process

3. If you have a FAS ID but no ASSIST account:

Complete the ASSIST registration process The user's existing FAS ID will be linked to their ASSIST account

4. If you have an ASSIST account but no FAS ID:

Create a FAS ID It will be linked to your ASSIST account

Step 6. Create Your FAS ID (if prompted)

If you do not have a FAS ID, you will need to complete the FAS ID Information page by entering:

First Name Last Name Email address (pre-populated from the account check process) Password/Confirm Password Security Question & Answer

Select 'Continue'.

Step 7. Enter ASSIST Information

Complete the ASSIST Information page by providing:

Office Phone Extension (optional) Answer the CPRM Question Default application (if prompted)

Select 'Continue'.

Step 8. Select Your Company

Enter your Company Name or UEI and select 'Search'. Then select one or more companies (if registered) OR select 'Add' if your company is not listed/registered. Please note, only companies with an active registration profile in SAM.Gov will appear in the search results. If you cannot find your company in the search, please verify that the company has an active entity profile in SAM.

The search results are presented as follows:

Companies with a checkbox are registered in ASSIST.

Companies with an 'Add' button are not registered in ASSIST.

Note: Once you have selected the registered company or companies and click 'Continue,' the "Contractor Company Access" window will open, moving you to step 10.

Quick Tips: Users can refine the displayed results using the filter options. Additionally, to see all selected companies in one place, click the "Selected Companies" hyperlink.

https://sam.gov

Step 9. Complete Company Details (if registering a new company)

Select the 'Add' button if your company is not registered. Complete the required fields under the ASSIST Company Details section on the Company Information page and select 'Save' when complete.

Step 10. Set Company Access

Answer all the company access questions, check the Self Attestation box and select 'Save'.

Step 11. Select Contract Access

Review the list of available contracts, select none, one or more contracts (if applicable), and then select ' Continue'. If needed, use the filter to narrow results.

Note: You can select multiple contracts across companies.

Step 12. Review Summary

Before finalizing registration, users should thoroughly review all entered information and then select the 'Create account' button to submit.

Note: Depending on the registration path determined during the Account Check, the user may be able to edit their selections for FAS ID Information, ASSIST Information, Company and Contract.

Step 13. Registration Complete

Upon completion of the registration process, users will see a confirmation screen. If the user's email matches the Company POC's email address as reported in SAM.Gov, then the registration will be auto-approved.

Successfully registered confirmation message:

https://sam.gov/

If the user's email address does not match the Company POC's email address, the registration status is set to pending approval and the Company POC is notified. The Company POC will need to review and approve the user's account before access is granted.

'Pending Approval' Status confirmation message:

Definitions

Contractor User - a contractor user is a person who is an employee at a contractor company (Industry Partner) that does business with the GSA.

Contractor Company - a contractor company is the company that the contractor user works for. A contractor company is distinguished by having a Unique Entity Identifier (UEI) number. For large corporations, there may be multiple contractor companies registered in ASSIST to capture each UEI number. Contractor users can be registered to multiple contractor companies.