Binghamton 1st Floor_AE600.pdf

TYPE H1

HOLLOW METAL

WELDED FRAME

0' - 2" 0' - 2"

DOOR WIDTH

TYPE F

FLUSH

NOTE: DOOR TYPES ARE GENERALLY BASED ON STEEL DOOR INSTITUE STANDARD STYLES

TYPE F-A

FLUSH ACOUSTICAL

TYPE F-RF

FLUSH RF SHEILDED

THREAT SIDE SECURE SIDE

JUNCTION BOX -

MOUNTED TO FRAMING

OR STRUCTURE (GC)

ELEC. HINGE (GC)

ELEC. LOCKSET (GC)

LATCH GUARD (GC) (IF

SCHEDULED)

ACCESS CONTROL

KEYPAD/ CARD READER

(SC)

BOX FOR KEYPAD/CARD

READER (GC)

ELEC. LOCKSET (GC)

CONDUIT TO J-BOX (GC)

DOOR CLOSER (GC)

CONDUIT W/ PULL

STRING TO J-BOX JUST

ABOVE CEILING (GC)

M

IR

R O

R I M

A G

E

NOTE:ALL HARDWARE AND ACCESS CONTROL DEVICES SHOULD BE MOUNTED AT STANDARD ARCHITECTURAL BARRIERS ACT ACCESSIBILITY STANDARD (ABAAS) HEIGHT UNLESS OTHERWISE NOTED. ALL DOOR, FRAME, AND WALL PREP BY GC. WIRING OF DEVICES BACK TO SECURITY PANEL BY SC.

GC - GENERAL CONTRACTOR

SC - SECURITY CONTRACTOR HIRED BY GC

FINISH FLOOR

B.O. DECK

CEILING

EMT CONDUIT W/ PULL STRING TO

POWER SUPPLY/ ACCESS CONTROL

PANEL (10th FLOOR, SEE ELECTRICAL

NOTES) (GC). CABLING TO TENANT

POWER SUPPLY/ ACCESS CONTROL

PANEL (SC)

(305)

1' - 0" (1

SCHEDULED WALL

CONSTRUCTION

HOLLOW METAL

FRAME

SCHEDULED

DOOR

JAMB BEYOND

20 GA. DOUBLE

METAL STUDS

SCHEDULED WALL

CONSTRUCTION

20 GA. DOUBLE

METAL STUDS,

FULL HEIGHT

HOLLOW METAL

FRAME

SCHEDULED

DOOR

S E

E P

L A

N S

V A

R

IE

S

SECURE WALL

CONSTRUCTION (REFER TO

PARTITION TYPES)

14 GA. COLD ROLLED STEEL

TELESCOPING FRAME FRAME

COLD ROLLED STEEL

DOOR

JAMB BEYOND

16 GA. DOUBLE

METAL STUDS

5" MIN.- 6-1/4" MAX

SOUND DEADENING

MATERIAL IN JAMB

THREAT SIDE SECURE SIDE

JUNCTION BOX -

MOUNTED TO FRAMING

OR STRUCTURE (GC)

ELEC. HINGE (GC)

ELEC. LOCKSET (GC)

LATCH GUARD (GC) (IF

SCHEDULED)

ACCESS CONTROL

KEYPAD/ CARD READER

(SC)

BOX FOR KEYPAD/CARD

READER (GC)

ELEC. LOCKSET (GC)

CONDUIT TO J-BOX (GC)

DOOR CLOSER (GC)

CONDUIT W/ PULL

STRING TO J-BOX JUST

ABOVE CEILING (GC)

M

IR

R O

R I M

A G

E

NOTE:ALL HARDWARE AND ACCESS CONTROL DEVICES SHOULD BE MOUNTED AT STANDARD ARCHITECTURAL BARRIERS ACT ACCESSIBILITY STANDARD (ABAAS) HEIGHT UNLESS OTHERWISE NOTED. ALL DOOR, FRAME, AND WALL PREP BY GC. WIRING OF DEVICES BACK TO SECURITY PANEL BY SC.

GC - GENERAL CONTRACTOR

SC - SECURITY CONTRACTOR HIRED BY GC

FINISH FLOOR

B.O. DECK

CEILING

EMT CONDUIT W/ PULL STRING TO

POWER SUPPLY/ ACCESS CONTROL

PANEL (10th FLOOR, SEE ELECTRICAL

NOTES) (GC). CABLING TO TENANT

POWER SUPPLY/ ACCESS CONTROL

PANEL (SC)

(305)

1' - 0" (1

(1) HC-30 ELECTRIFIED

CAM-LIFT HINGE (AS REQ.)

(2) HC-30 CAM-LIFT

HINGES

E Q

E

Q

C E

N T

E R

O F

L K

M

PERIMETER SOUND SEAL

16 GA. DOUBLE METAL

STUDS, FULL HEIGHT

M

IN

-1

/4

M A

X

SECURE WALL

CONSTRUCTION (REFER TO

PARTITION TYPES) 14 GA. COLD ROLLED STEEL

TELESCOPING FRAME FRAME

COLD ROLLED STEEL

DOOR

SOUND DEADENING

MATERIAL IN JAMB

DN

DN

UP

UP

UP

UP

ELEV.

SHAFT1HR

ABANDONED

STAIR 1HR

ELEV.

SHAFT1HR

FREIGHT

ELEV.1HR

EXIT

STAIR1HR

EXIT

STAIR1HR

SHAFT

1HR

LOBBY

1HR

ENTRY

LOBBY1HR

STAIR

1HR

COURTROOM

1HR

3 3a

33 3

3 3

3a

3 3 3

3 3

3 3

3a

3a

3 3 3

3 3

3 3

3 3 3

3 3 3

3a

3a

3a3a

3a 3a

3a

3a

C.5

RENOVATION

SHEET SIZE: 34 X 44

DRAWING NO.

CHECKED BY

DRAWN BY

FLOOR NO.

FILE NAME

DRAWING TITLE

SUB. DATE

SUBMISSION

GSA PM

PROJECT NO.

PROJECT

DESCRIPTION

PROJECT

TITLE

FACILITY CODE

OTHER

BUILDING NOs.

BUILDING NO.

CITY/ST./ZIP

STREET

NAME

CONSTR. FIRM

SUB A/E

PRIME A/E

A/E CON. NO.

D R

A W

IN

G

P R

O J E

C T

B U

IL

D

IN

G

C O

N T

R A

C T

O R

S G

R A

P H

IC

S C

A L

E R

E V

IS

IO

N N

O T

E S

C E

R T

IF

IC

A T

IO

N

S

MARK DATE DESCRIPTION

SHEET OF

NK BHANDARI ARCHITECTURE

C&S ENGINEERS

GS-07-P-16-UC-D-7008

K E

Y P

L A

N

CONTROLLED UNCLASSIFIED INFORMATION (CUI) PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.

DATE:

A

SUB A/E

CONSTR. CON. -

NYS EDUCATION LAW, SECTION 7209 AND 69.5(B)

PROHIBITS ANY PERSON TO ALTER THESE DRAWINGS

OTHER THAN A LICENSED ARCHITECT OR THE DESIGN

ENGINEER. INFORMATION ON THESE DRAWINGS FOR

GSA ONLY, AND CAN BE UTILIZED BY GSA AS THEY

DEEM NECESSARY.

COPYRIGHT 2024

N. K. BHANDARI, ARCHITECTURE & ENGINEERING, P.C.

1020 7th North Street, Suite 130 Liverpool, NY 13088

Phone Fax www.nkbpc.com

315.428.1177 315.428.9822

499 Col. Eileen Collins Blvd Syracuse, NY 13212

Phone www.cscos.com

315.455.2000

U.S. General Services Administration

15 HENRY STREET

BINGHAMTON, NY 13901

B

C

D

3 4 51

CONTROLLED UNCLASSIFIED INFORMATION (CUI)

PROPERTY OF THE UNITED STATES GOVERNMENT

COPYING, DISSEMINATION, OR DISTRIBUTION OF THIS

DOCUMENT TO UNAUTHORIZED RECIPIENTS IS

PROHIBITED

CUI

/2

/2

:3 :2

A

M

SCHEDULES AND DIAGRAMS

1ST FLOOR BUILD-OUT

DBH

KRS 07/16/2025

16320.XX.124

07/16/2025

17 48

FOR CONSTRUCTION

AE600

JASON LITZ

DOOR SCHEDULE

DOOR

NUMBER ROOM NAME

ROOM

NUMBER

DOOR FRAME

THRESHOLD

FIRE

RATING

STC

RATING REMARKS

HARDWARE

SET

DOOR

NUMBERWIDTH HEIGHT THICKNESS TYPE

DOOR

MATERIAL FINISH FRAME TYPE

FRAME

MATERIAL FRAME FINISH

FRAME

DETAIL

134B SERVICE CORRIDOR 134B 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 9 134B

137 ENTRY VESTIBULE 137 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 50 1, 3, 9 3 137

139 OPEN OFFICE 144 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 1 4 139

140 ELEC. AND COMMS 140 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 T1 - 1, 5 6 140

141 LAN ROOM 141 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 T1 45 MIN. 1, 5 6 141

142 OFFICE 142 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 45 1, 2, 10 4 142

143 IT WHITE SPACE 143 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 1, 5, 6, 7 1 143

144 OPEN OFFICE 144 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 50 1, 4, 5, 6, 8 2 144

145 OFFICE 145 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 45 1, 10 10 145

146 OFFICE 146 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 45 1,2 7 146

147 ADMIN. AREA 147 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 1 5 147

148 FILING ROOM 148 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - 1 10 148

149 OFFICE 149 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 45 1, 2 7 149

150 CONF. ROOM 150 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 50 3 8 150

151 OFFICE 151 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 45 1, 2 7 151

152 EXISTING CORRIDOR 228 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 9 152

155 3' - 0" 6' - 0" 0' - 1 3/4" 155

161 BREAK ROOM 138 3' - 0" 7' - 0" 0' - 1 3/4" F WD TR-6 CAT POLY H1 HM PNT3 4 & 5/ AE600 - - 5 161

1/4" = 1'-0"AE600

1 DOOR FRAME TYPES

1/4" = 1'-0"AE600

2 DOOR TYPES

DOOR SCHEDULE REMARKS

NUMBER DOOR SCHEDULE REMARKS

1 ELECTRONIC SECURITY - REFER TO HARDWARE SETS AND SECURITY DRAWINGS

2 SOUND CONTROL DOOR & FRAME WITH STC RATING = STC 45

3 SOUND CONTROL DOOR & FRAME WITH STC RATING = STC 50

4 CERTIFIED SOUND CONTROL RATED DOOR AND FRAME WITH STC RATING = 50. SOUND

RATED DOOR MEETING SOUND GROUPS 3 AND 4 STANDARDS, THIS SOUND RATED DOOR

AND LOCK PACKAGE COMES WITH LOCKING DEVICE, ENTRY SIDE OF THIS DOOR INSTALLED

WITH LOCKMASTERS (OR APPROVED EQUAL) LOCK. EXIT SIDE OF THE DOOR INSTALLED

WITH A MATCHING DOOR LEVER. THE COMPLETE DOOR PACKAGE INCLUDES: COMPLETE

DOOR UNIT WITH FRAME, HINGES, DOOR CLOSER, LEVER, LOCKING DEVICE, BUILT IN

THRESHOLD, DOOR BOTTOM AND SECURE DOOR SEAL SYSTEM. INSTALLATION AND

TESTING WILL BE REQUIRED BY VENDOR.

5 INGRESS BY PRESENTING CREDENTIAL AT PROXIMITY READER OR BY KEY OVERRIDE.

AUXILIARY LATCH DEADLOCKS LATCHBOLT WHEN DOOR SHUT. EGRESS ALWAYS FREE.

6 LOCKING HARDWARE ON ALL DOOR ASSEMBLIES IN MEANS OF EGRESS LEADING TO EXITS

SHALL BE ARRANGED TO OPEN READILY FROM THE EGRESS SIDE. PROPOSED LOCKING

ARRANGEMENTS SHALL NOT REQUIRE THE USE OF A KEY, A TOOL, A CARD, OR SPECIAL

KNOWLEDGE, OR EFFORT FOR OPERATION FROM THE EGRESS SIDE. A RELEASING DEVICE

ON A DOOR LEAF SHALL HAVE AN OBVIOUS METHOD OF OPERATION FROM THE EGRESS

SIDE, AND SHALL OPEN THE DOOR WITH JUST ONE OBVIOUS, SIMPLE, SINGLE RELEASING

OPERATION BY ONE HAND UNDER ALL LIGHTING CONDITIONS [EXCEPT FOR SPECIAL

LOCKING DELAYED EGRESS AND SENSOR-RELEASE OF ELECTRICAL LOCKING SYSTEMS

ARRANGEMENTS (IF ANY) PROVIDED IN ACCORDANCE WITH 7.2.1.6 OF NFPA 101.

7 OPERATIONAL DESCRIPTION #1: DOOR NORMALLY CLOSED AND LOCKED.

DOOR UNLOCKED FROM EXTERIOR SIDE BY VALID PIV CREDENTIAL.

EGRESS PROVIDED WHEN DOOR IS RELEASED FROM INTERIOR BY LEVER.

ELECTRIC STRIKE WILL REMAIN LOCKED (FAIL SECURE) UPON LOSS OF POWER.

MECHNICAL KEY OVERRIDE FROM EXTERIOR.

FREE EGRESS FROM INSIDE AT ALL TIMES.

8 OPERATIONAL DESCRIPTION #2: DOOR NORMALLY CLOSED AND LOCKED.

DOOR UNLOCKED FROM EXTERIOR SIDE BY VALID PIV CREDENTIAL AND HIGH SECURITY

TUMBLER LOCK.

EGRESS PROVIDED WHEN DOOR IS RELEASED FROM INTERIOR BY LEVER.

ELECTRIC STRIKE WILL REMAIN LOCKED (FAIL SECURE) UPON LOSS OF POWER.

INTERIOR KEYPAD ARMS/DISARMS SECURITY SYSTEM LOCATED INSIDE PRIMARY DOOR.

MECHANICAL KEY OVERRIDE FROM EXTERIOR.

FREE EGRESS FROM INSIDE AT ALL TIMES.

9 OPERATIONAL DESCRIPTION #3: DOOR NORMALLY CLOSED AND LOCKED.

DOOR CANNOT BE ACCESSED FROM THE EXTERIOR. NO TRIM OR CYLINDER ON EXTERIOR.

EGRESS PROVIDED WHEN DOOR IS RELEASED FROM INTERIOR BY PUSH BAR.

DEPRESSING PUSH PAD WILL ACTIVATE LOCAL ALARM. OPENING DOOR WILL SEND SIGNAL

TO SECURITY CONTROL.

DOOR REMAINS LOCKED (FAIL SECURE) UPON LOSS OF POWER.

FREE EGRESS FROM INSIDE AT ALL TIMES.

10 PROVIDE NO PERIMETER SEAL, AUTOMATIC DOOR BOTTOM, OR CORNER BLOCKS ON DOOR

EVEN THOUGH IT IS AN STC RATED DOOR.

1/2" = 1'-0"AE600

4 DOOR SECURITY HARDWARE DIAGRAM

1 1/2" = 1'-0"AE600

5 DOOR HEAD DETAIL (GWB)

1 1/2" = 1'-0"AE600

6 DOOR JAMB DETAIL (GWB)

DOOR SCHEDULE NOTES

1 DOOR GEOMETRY: ALL DOORS TO BE 1 ¾” THICK X 84” HIGH UON. PROVIDE DOORS OF

MATERIAL, CONSTRUCTION, AND FINISH PER THE DRAWINGS AND SPECIFICATIONS.

2 UNDERCUT / CLEARANCES: ALL DOOR UNDERCUTS TO BE ¾” UON. ACTUAL CLEARANCE AT

THRESHOLD OF FIRE RATED DOORS IS TO BE PROVIDED PER THE TESTED AND LISTED

ASSEMBLY, ALLOWING FOR PROPER OPERATION AND PROPER ENGAGEMENT OF ALL

REQUIRED HARDWARE ON THE RATED OPENING.

3 DOOR AND FRAME DUTY: PROVIDE DOOR AND FRAMES OF THE APPROPRIATE DUTY AND

CONSTRUCTION AS SHOWN ON THE DRAWINGS AND AS SPECIFIED.

4 DOOR WIDTH CONVENTION: DOOR LEAF WIDTH IS INDICATED IN INCHES IN THE DOOR

SCHEDULE. TWO NUMBERS SEPARATED BY A FORWARD SLASH (/) INDICATES DOUBLE

DOORS.

5 FRAMES: ALL FRAMES TO BE OF MATERIAL, CONSTRUCTION, AND FINISH PER THE

DRAWINGS AND SPECIFICATIONS. PROVIDE FRAME ANCHOR TYPE TO SUIT WALL

CONSTRUCTION AND ANCHOR QUANTITY PER HMMA 840-14. ALL FRAMES TO OVERLAP

WALL FINISH UON.

6 FRAME CONSTRUCTION: HM FRAMES ARE TO BE MITERED AND FULLY WELDED UON.

KNOCK DOWN FRAMES WILL THE INDICATED ON THE DRAWINGS AND IN THE

SPECIFRICATIONS IF THEY ARE TO BE USED.

7 DOOR AND FRAME FIRE RATING: WHERE FIRE RATED DOORS ARE INDICATED, DOOR FRAME

RATING SHALL EQUAL THE DOOR RATING. BORROWED LIGHT FRAMES FOR WINDOWS

INSTALLED IN FIRE RATED PARTITIONS TO BE RATED SAME AS DOOR FRAMES AND BE

COMPATIBLE WITH WALL TYPE.

8 FIRE DOOR ASSEMBLIES: FIRE DOOR ASSEMBLIES SHALL COMPLY WITH NFPA 80 STANDARD

FOR FIRE DOORS AND OTHER OPENING PROTECTIVES. FIRE RATED OPENINGS SHALL BE

TESTED AND OR LISTED BY ONE OF THE FOLLOWING THREE AGENCIES: 1) UNDERWRITERS

LABORATORIES, 2) INTERTEK / WARNOCK HERSEY MARK, OR 3) FACTORY MUTUAL. FIRE

RATING LABELS ARE TO BE AS FOLLOWS:

A LABEL = 3 HOURS (180 MIN)

B LABEL = 1 ½ HOURS (90 MIN)

C LABEL = ¾ HOUR (45 MIN)

9 GLAZING: ALL VISION PANELS IN FIRE RATED DOORS AND FRAMES TO BE OF GLAZING TYPE

AND THICKNESS AS SHOWN ON THE DRAWINGS AND IN THE SPECIFICATIONS. ALL VISION

PANELS IN NON-RATED DOORS AND FRAMES TO BE SAFETY GLASS UON. ALL EXTERIOR

DOOR LIGHTS, TRANSOMS, AND SIDELIGHTS TO BE 1” INSULATING TEMPERED GLASS UON.

10 HARDWARE REINFORCEMENT: DOORS AND FRAMES SHALL BE REINFORCED FOR

INSTALLATION OF ALL HARDWARE. DRILLING AND TAPPING FOR ATTACHING OF SURAFCE

MOUNTED HARDWARE TO BE PROVIDED FOR COMPLETE FUNCTIONAL DOOR OPENING.

11 DOOR POSITION: FINISHED DOOR OPENINGS SHALL BE NOMINAL 6” FROM FINISHED CORNER

OF ROOM AT HINGE SIDE, EXCEPT WHERE DIMENSIONED OTHERWISE. ON THE “PULL” SIDE

OF A DOOR OPENING, THE STRIKE SIDE SHALL BE NOMINAL 18” FROM A PERPENDICULAR

WALL. ON THE “PUSH” SIDE OF A DOOR OPENING EQUIPPED WITH BOTH A CLOSER AND

LATCH, THE STRIKE SIDE SHALL BE NOMINAL 12” FROM A PERPENDICULAR WALL.

0 2' 4' 8'

0 1' 2'

0 1' 2' 0 2' 4' 8'

0 1' 2' 4'

1 1/2" = 1'-0"AE600

7 DOOR HEAD DETAIL (GWB)

0 1' 2'

0 1' 2'

DOOR SCHEDULE NOTES

12 MASONRY OPENING LINTELS: ALL MASONRY OPENINGS TO RECEIVE LINTELS. REFER TO

LINTEL SCHEDULE FOR MORE INFORMATION.

13 GROUTING OF FRAMES IN MASONRY: WHEN FRAMES ARE IN MASONRY CONSTRUCTION TO

BE FILLED WITH GROUT AND ANTI-FREEZE AGENTS ARE PRESENT, THE INSIDES OF THE

FRAMES SHALL BE TREATED BY THE GENERAL CONTRACTOR WITH A SUITABLE BITUMINOUS

UNDERCOATING MATERIAL AS SPECIFIED.

14 FRAME BOX-OUTS: PROVIDE BOX-OUTS (MORTAR BOXES, STRIKE BOXES, ACCESS

CONTROL HARDWARE, ETC.) IN DOOR FRAMES WHERE FRAMES ARE GROUTED OR IN

MASONRY WALL.

15 JAMB AND HEAD STUDS: AT METAL STUD WALLS (GYPSUM BOARD WALLS), PROVIDE 20 GA

METAL STUDS AT JAMBS AND HEADS OF DOOR OPENINGS UON.

16 EXTERIOR DOORS AND FRAMES (WHERE SHOWN): ALL EXTERIOR HOLLOW METAL DOORS

AND FRAMES SHALL BE PROVIDED UTILIZING METALLIC-COATED STEEL (GALVANIZED)

STEEL SHEETS AS SPECIFIED.

17 PRE-TREAMENT AND PRIME PAINT: ALL HOLLOW METAL DOORS AND FRAMES SHALL

RECEIVE AN IRON PHOSPHATE PRE-TREATMENT AND ONE COAT OF BAKED ON PRIME

PAINT.

18 EXISTING OPENING COMPONENTS: WHERE AN EXISTING OPENING COMPONENT (DOOR,

FRAME, HARDWARE) IS TO BE RE-USED, EACH COMPONENT SHALL BE INDICATED AS “EX” IN

THE SCHEDULE, DENOTING “EXISTING”. ALL EXISTING COMPONENTS ARE TO BE INSPECTED

IN THE FIELD, VERIFY 1) DIMENSIONAL CHARACTERESTICS, 2) MOUNTING HEIGHTS /

GEOMETRIES, 3) MANUFACTURER / MODEL INFORMNATION, and 4) FIRE RATED LABEL OR

LISTING INFORMATION AVAILABLE FOR EACH COMPONENT.

19 ACCESS CONTROL RACEWAYS: PROVIDE ALL RACEWAYS REQUIRED FOR THE COMPLETE

INSTALLATION AND PROPER OPERATION OF ALL SCHEDULED ACCESS CONTROL

HARDWARE. REFER TO DOOR AND HARDWARE SCHEDULES, ACCESS CONTROL DRAWINGS,

AND RELATED SPECIFICATIONS FOR MORE INFORMATION.

20 OPERATIONAL DESCRIPTION: DOOR ACCESS CONTROL OPERATIONAL DESCRIPTION TO BE

AS INDICATED IN THE DRAWINGS AND SPECIFICATIONS. CONFIRM OPERATIONAL

DESCRIPTION / SEQUENCE THROUGH SUBMITTAL AND REVIEW PROCESS WITH ARCHITECT /

OWNER.

21 STORAGE OF DOORS AND FRAMES: STORE DOORS AND FRAMES AT THE PROJECT UNDER

COVER AS SPECIFIED. PLACE UNITS ON AT LEAST 4” WOOD SILLS OR ON FLOOR IN A

MANNER THAT WILL PREVENT RUST AND DAMAGE. AVOID USE OF NON-VENTED PLASTIC OR

CANVAS SHELTERS, WHICH CREATE A HUMIDITY CHAMBER. IF THE WRAPPER ON ANY

COMPONENT BECOMES WET, REMOVE IMMEDIATELY, PROVIDE ¼” SPACE BETWEEN DOORS

AND FRAMES TO PROMOTE CIRCULATION. ADDITIONAL STORAGE INFORMATION PER ANSI

A250.8 (SDI100) IS RECOMMENDED.

22 ONCE INSTALLED, CONTRACTOR SHALL ENSURE THAT THE GAP BETWEEN DOORS AND

FRAMES IS CONSISTENTLY WITHIN MANUFACUTER STANDARDS (TYPICALLY 1/8") FOR

PROPER FUNCTIONALITY WITH SCHEDULED SECURITY / LOCKING MECHANISM AND

ACOUSTICAL GASKETS.

F-RF

F-A

F-A

F-A

F-A

F-RF

F-A

45 MIN.

DOOR HARDWARE SCHEDULE

1/2" = 1'-0"AE600

9 ICD 705 DOOR SECURITY HARDWARE DIAGRAM

0 1' 2' 4'

F WD TR-6 CAT POLY H1 HM PNT3

- 11

1 1/2" = 1'-0"AE600

8 DOOR JAMB DETAIL 2 (GWB)

CATWALK ---

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

7 & 8/ AE600

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

5 & 6/ AE600

1 04/24/26 Door Hardware Schedule