Solicitation Amendment 0004 2023 12 22.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

The Purpose of this amendment is to:

1. Provide questions and answers.

2. Provide document Hoosac Items for Destruction

3. The proposal due date remains 1/12/2024 by 2:00pm EST.

All other terms and conditions remain unchanged.

Questions Answers Please confirm that your 6-page GSA 527 (REV. 10/2021) form is the only financial document required to accompany our proposal Confirmed

Per para 1.5A - Which items are to be removed and salvaged as historic materials? Identification and quantification of such material will be important to bid the project accurately.

There are no items to be removed and stored as historic materials. Structural timbers and brick elements to be salvaged are addressed in the Appendix. Refer also to specification section 01 74 19 "Construction Waste Mgt and Disposal -salvaged items for govt use"

Per para 1.5B - Please identify items that will be removed for reinstallation.

Additionally, please provide location where such items shall be reinstalled.

Identify connections and supports required to make items functional.

There are no items to be removed and stored as historic materials. Structural timbers and brick elements to be salvaged are addressed in the Appendix. Refer also to specification section 01 74 19 "Construction Waste Mgt and Disposal -salvaged items for govt use"

Per para 1.5C – Please advise if this paragraph is applicable to the project since the scope of work calls for complete demolition of this building.

There are no items to be removed and stored as historic materials. Structural timbers and brick elements to be salvaged are addressed in the Appendix. Refer also to specification section 01 74 19 "Construction Waste Mgt and

Please advise if section 1.6A is applicable.

There are no items to be removed and stored as historic materials. Structural timbers and brick elements to be salvaged are addressed in the Appendix. Refer also to specification section 01 74 19 "Construction Waste Mgt and

Please extend RFI submission date till one week prior to bid submission date.

The proposal due date was extended in amendment 0002 to January 12th, 2024 by 2:00pm EST.

Will the Government entertain to have the work priced after the plan is approved since the scope will dictate requirements. Pricing without knowing the details will not be possible.

No. The proposal due date was extended in amendment 0002 to January 12th, 2024 by 2:00pm EST.

Reviewing the specifications, I see references throughout to a drawing package that should include a traffic management plan and site layout plan. The only drawings I’ve located are the drawings of the existing timber framing, masonry condition analysis, and the salvage material laydown area. Please advise if/when other referenced drawings will be made available.

The drawings package were provided in Amendment 0003 issued 12/18/23.

Additionally, the building is filled with a substantial amount of material. Will the government be removing the items? If not, is there a list of salvage vs disposal?

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

Would it be possible to include the sign in sheets with the amendment? Amendment 0002 included the sign-in sheet from the site visit

Can you provide plans/drawings of the project?

The drawings package were provided in Amendment 0003 issued 12/18/23.

Are we responsible for removing all items inside the building or will these items be removed prior to demolition

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

If there are signs of asbestos will there be an additionally CLIN in the future in the contract for abatement? We see that there’s an additional scope of work for the abatement which we would need to amend the price. Refer to project appendices for Hoosac haz-mat reports

Since it’s a large contract can payments be dispersed in increments?

Payments will be dispersed under FAR Clause 52.232-5 Payments under fixed-price construction contracts

Is this project follow under the prevailing wages?

Yes. Please refer to the wage determination MA20230001 provided in the solicitation.

Is the awarded contractor relocating the contents in the building?

Contents will be disposed of per contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

If so, are they to be stored on the Navy pier?

Contents will be disposed of per contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

How will the contents be protected?

Contents will be disposed of per contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

Is the brick to be saved and stored on the Navy pier like the timbers?

Refer to 02 05 50 Section 1.05B. Selectrive Salvage and Storage Information to be submitted within 20 days after the date of the Notice to Proceed

How will the timbers be protected on the pier?

Refer to 01 74 19 Section 3.2C and Section 02 05 50 for clarifications.

How will the timbers be protected and secured once moved back to the site?

Refer to 02 05 50 Section 1.05B. Selectrive Salvage and Storage Information to be submitted within 20 days after the date of the Notice to Proceed

Is the elevator functional? No Is the forklift functional and available for use? No The specs reference a series of drawings which do not appear to be on the SAM website.

The drawings package were provided in Amendment 0003 issued 12/18/23.

Please confirm if taxes should be carried in proposals?

Pursuant to FAR 52.229-3 Federal, State, and Local Taxes, the Contract price includes all applicable Federal, State, and local taxes and duties. This same clause further states that the Government shall, without liability, furnish evidence appropriate to establish exemption from any Federal, State, or local tax when the Contractor requests such evidence and a reasonable basis exists to sustain the exemption. The U.S.

General Services Administration (GSA) has no authority to exempt the Contractor from Federal, State, or Local taxes. The Contractor’s performance under this Contract is that of an independent contractor. The Contractor under this Contract is neither an agent nor principal of the United States Government or GSA. GSA is an Executive Agency of the United States Government.

Please confirm if any state, local, and/or Federal permits will be required on this project?

Refer to 01 31 00 Section 1.9. Potential Permits: Permits listed below were identified during the design process as likely to be required based on typical means and methods of construction.

The list is provided to assist Contractor in determining which permits will be required for contract’s chosen means and methods. The list shall not be considered complete; it is the Contractors’ responsibility to determine means and methods and obtain required permits. Contractor shall obtain all permits required to legally conduct work.

Please confirm if there are any known hazardous materials?

Reference the project manual for a description of known haz-mat

Is there any listing of how much/how many items within the building will need to be salvaged as historical and who will be responsible for identifying and removing these items?

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

Please clarify where the 8ft ornamental fence is to be installed as mentioned in the summary? Refer to project drawings issued in Amendment 0003.

Please confirm if the entire parking lot/paved area is to be removed? Refer to project drawings issued in Amendment 0003.

Please confirm what area and how much space will be allowed to be used for laydown, dumpsters, office trailers?

Laydown, dumpster, and office trailers should be located within site boundaries per project drawings.

Please confirm if there will be access to the CNS for construction trailer access or laydown access?

Laydown, dumpster, and office trailers should be located within site boundaries per project drawings. Access to Pier 1 laydown space for temporary timber salvage storage will be coordinated with National Park Service.

Please clarify Volume III Specifications Section 01 00 00 - General Requirements Part 1 - General bullet G "The work must be substantially completed by 120 days after The Notice to Proceed. Final Completion shall be achieved by 240 days after the Notice to Proceed." What is the set period of performance for this work?

Refer to 01 00 00 Section 1.01G. The work must be substantially completed by 120 days after The Notice to Proceed. Final Completion shall be achieved by 240 days after the Notice to Proceed.

Please confirm if the foundation is being demolished and disposed of? If so, Please provide drawings of existing foundation?

There is no foundation removal. The contractor is expected to take the building down to grade. Refer to the drawings provided in Amendment 0003.

During the site visit there were many items throughout the building. Please confirm if the Government will be removing any items or if all items in the building will be removed and disposed of?

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for additional requirements.

Please confirm if this project is to take place during the winter or will it be able to wait until the spring 2024?

Refer to 01 00 00 Section 1.01G. The work must be substantially completed by 120 days after The Notice to Proceed. Final Completion shall be achieved by 240 days after the Notice to Proceed.

Please clarify salvage scope: Refer to project documents

20 yards of brick - does this need to be wrapped, palletized, cleaned, transported off site?

Refer to 02 05 50 Section 1.05B. Selectrive Salvage and Storage Information to be submitted within 20 days after the date of the Notice to Proceed

Wood - does this include all beams and floor boards too?

Refer to Appendix "NPS Desired Timber Salvage Quantities" in Project Manual. Other wood is subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1.

Page 252 of Specifications please confirm if x180 boards that are shown are referring to Board Feet? Trying to clarify correlation between approx. total 1056 throughout and 180 boards.

Approximately 180 beams exist per floor. 1,056 is the approximate total count of beams in the six-story warehouse.

Please confirm if all floor boards and decking are to be salvaged?

Floor boards and decking are not NPS Desired Timber Salvage.

Floor boards and decking are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1

I’ve reviewed the drawing package released and there does not appear to be a site layout or traffic management plan referenced in the specifications. The limits of occupancy mentioned to be shown in this drawing will be critical to plan the methods of demolition for the structure. Refer to project drawings issued in Amendment 0003.

I have an additional question as well. What, if any stored relics/materials will be removed from the building prior to start of work, and will any removal/shipment of stored relics be the responsibility of the contractor? If so, will a salvage inventory for these material be prepared for bidding purposes?

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for

Foundation removal: Will foundations be removed? What are the limits of removal, to a certain depth, slab only, slabs and foundation walls? If including foundation walls, will this include foundation walls supporting the sidewalk, freedom trail, and neighboring parking lot? If so will bracing/shoring design be the responsibility of the contractor? If the building is on piles, will pile caps have to be removed to a certain depth as well?

There is no foundation removal. The contractor is expected to take the building down to grade. Refer to the drawings provided in Amendment 0003.

Backfilling: If foundations are to be removed in any extent, please provide specifications for backfill material/methods that may be required, including (if applicable) any soil stabilization requirements for final condition of the lot, whether that be loaming/seeding, straw/mulch cover, or other

There is no foundation removal. The contractor is expected to take the building down to grade. Refer to the drawings provided in Amendment 0003.

Is it possible for the government to consider team member resumes as part of their past performance?

No. Please refer to Factor 2 – Company’s Past Performance submittal requirements.

Is it possible for the government to consider past performance that is related to demolition, but is not within the estimated cost range of $5-$10M?

The evaluation factors and definition of "similar project" are for evaluation purposes and not as a means to exclude projects.

Has all of the equipment and materials in the building been tested for hazardous materials?

Please refer to Project Manual Appendices: Existing Building Hazmat Report, Existing Building Materials Testing, Pre- Demolition Hazardous Materials Survey, and Existing Boiler House Hazmat Report

Have the ink / rollers been tested for any hazardous materials Please refer to Appendix: Pre-Demolition Hazardous Materials Survey Can you clarify where the Black sealant on elevator shaft walls” is? Does this mean the rooftop penthouse 2 sides which are coated with asbestos or does it indicate that the inside of the elevator shafts are coated with asbestos on all 4 sides from floors 1-6?

Refer to Appendix "Existing Building Hazmat Report" for location(s) of positive black sealant on exterior elevator shaft walls.

Can you clarify where the Black caulking on elevator shaft door” is? Is this a caulking in one location or is it present on all elevator doors? Or is it caulking on the rooftop elevator penthouse door?

Black caulk tested positive around the exterior door of the elevator shaft. Refer to page 272 of the Project Manual. Per the Appendix "Existing Building Hazmat Report," "Materials hidden or not accessible were evaluated and/or sampled within reasonable access limitations. During future renovation / demolition activities, additional building materials suspect of containing asbestos may be identified. If so, materials should be sampled and analyzed by a certified asbestos inspector prior to disturbance or removal.

There is a mention of wall sealants on the drawings provided in amendment 3.

Wall caulking is not mentioned in the BETA report. Can you provide a location and quantity.

Refer to Project Manual Appendix "Existing Building Hazmat Report" for description of sealants.

Is there a plan for the large amount of equipment and materials within the building? Is the government moving or saving any of it or does the contractor own all of the contents of the building?

Objects in the building are subject to contractor's Waste Reduction Work Plan. Refer to 01 74 19 Secion 2.1. See addendum titled "Treatment of Selected First Floor Objects" for

Treatment of Selected First Floor Objects The following items were located in the building during the pre-bid walkthrough and will be removed from the building prior to the successful bidder occupying the site:

• 1st floor front room: 2 ropemaking machines, a braider and a winder (tagged BOSTS 16671 and 16672) stored in the front room near entrance and to left along aisle)

• 1st floor front and back room: 17 Chain Forge dies (paper-labelled RETAIN)

• 1st floor front room: 7 pallets of die-lock chain near entry

• 1st floor front room: 1 pallet of steel anchor chain shackles

• 1st floor front and back rooms: Wood foundry patterns (one conical one in back room atop archeological timber, large one near light switches standing on floor in front room, and a group along the front room partition wall between rooms – 4 in crates, one standing on floor and others leaned against wall)

• 1st floor front and back rooms: Wood ship knee timbers and other archeological timbers on pallets in front and back rooms (one beneath conical foundry pattern in back room, others along right side of aisle in front room)

• 1st floor front room: Large saw blade

• 1st floor front room: Hawser cable and wood stand (BOSTS 285-286, long and on floor near archeological timbers)

• 1st floor front room: Large safety sign leaning against wall fronting stairwell (will evaluate with Steve C. and make determination regarding condition)

• 1st floor back room: Grindstone motor, grindstone and water pan (BOSTS 590-592, in middle of room, behind ropemaking machines on left)

• 1st floor back room: 1 bale of manila fiber

• 1st floor back room: Small plastic bag of hardware parts (BOSTS 16768) toward back of room

• 4th floor, back room: Boston Naval Shipyard Records: 7 metal drawers in a stack (part of accession BOSTS00381; uncatalogued archives) – (MOVE TO BLDG. 107)

• 1st floor, office: 3 ship panel doors

• 5th floor, back room: Section of USSC mast, rosewood table and legs, wood grating segments

Objects to be Destroyed (~244 Items)

The following objects located on the first floor of the Hoosac warehouse must be completely removed from premises and destroyed by the contractor. National Park Service staff must accompany materials to site of incineration and witness destruction. Destruction of these materials must be completed before the demolition of the building can commence.

Ropemaking Objects (99 Items)

Object Name: SPREADER Catalog Number: BOSTS 16545 Accession Number: BOSTS00339 Description: RECTANGULAR SPREAD BOARD WITH FOUR HOLES. METAL PIPE ON SIDE WITH AN

ELECTRICAL OUTLET.

Material: WOOD Condition: COM/GD Measurements: 141 CM LENGTH, 54.7 CM WIDTH, 25.4 CM DEPTH

Object Name: BIN Catalog Number: BOSTS 16546 Accession Number: BOSTS00339 Description: THREE HINGED METAL RECEIVING BINS FOR WATSON COARSE SPREADER Material: METAL

Measurements: 144.7 CM LENGTH, 101.6 CM WIDTH, 73.6 CM DEPTH

Object Name: GUARD Catalog Number: BOSTS 16547 Accession Number: BOSTS00339 Description: TEAR DROP SHAPED SCREEN WITH METAL BRACKETS AT BOTTON USED AS A

SCREEN GUARD

Material: METAL

Measurements: 198.1 CM LENGTH, 134.6 CM WIDTH

Object Name: PUMP Catalog Number: BOSTS 16548 Accession Number: BOSTS00339 Description: ELECTRIC PUMP ON STAND. STAND WITH DRIVE SHAFT. PIPING FO LUBRICATION

EXTENDING FROM SHAFT WITH ON/OFF VALVES. PIPE WITH ELECTRICAL WIRING ATTACHED TO

SHAFT.

Material: METAL Condition: COM/FR Measurements: 111.8 CM HEIGHT, 31.7 CM WIDTH, 59.7 CM LENGTH

Object Name: MACHINE, ROPE-MAKING Catalog Number: BOSTS 16549 Accession Number: BOSTS00339 Description: WATSON BREAKER. PILER BOARD ATTACHMENT. JURY-RIGGED PUSH BROOM

ATTACHED TO ROLLER.

Material: METAL

Measurements: 81.2 CM LENGTH, 182.8 CM WIDTH, 160 CM DEPTH

Object Name: FRAME Catalog Number: BOSTS 16550 Accession Number: BOSTS00339 Description: PALLET WITH 33 CAST IRON FRAME PIECES Material: CAST IRON

Measurements: 182.8 CM LENGTH

Object Name: GEAR Catalog Number: BOSTS 16551 Accession Number: BOSTS00339 Description: 2 LARGE CAST IRON GEARS Material: CAST IRON

Measurements: 19 CM DIAM, 9.5 CM DEPTH

Object Name: CART Catalog Number: BOSTS 16552 Accession Number: BOSTS00339 Description: CART FOR HAULING MATERIAL AROUND FACTORY FLOOR. WOODEN CART WITH

METAL FRAME, ON METAL WHEELS. THREE SIDES, OPEN FRONT.

Material: CAST IRON

Measurements: 128.2 CM HEIGHT, 91.4 CM LENGTH, 77.5 CM LENGTH

Catalog Number: BOSTS 16553 Accession Number: BOSTS00339 Description: CAST IRON MACHINE FRAME PIECE Material: CAST IRON

Measurements: 122 CM HEIGHT, 30.5 CM LENGTH, 10.2 CM WIDTH

Object Name: CAN Catalog Number: BOSTS 16554 Accession Number: BOSTS00339 Description: SIX SLIVER CANS WITH BOTTOMS. REDDISH IN COLOR Material: PRESS BOARD/METAL

Measurements: 108 CM LENGTH, 24 CM WIDTH

Object Name: AGITATOR Catalog Number: BOSTS 16555 Accession Number: BOSTS00339 Description: BLACK AGITATOR FOR MIXING LUBRICANT IN TANK. TWO SPINNERS AT END

MOTOR AND ELECTRICAL CORD AT OPPOSITE END.

Material: METAL

Measurements: 188 CM HEIGHT, 20.3 CM WIDTH

Object Name: BELT Catalog Number: BOSTS 16556 Accession Number: BOSTS00339 Description: LEATHER BELT WITH METAL CLASP Material: METAL

Measurements: 213.3 CM LENGTH, 5.08 CM WIDTH

Catalog Number: BOSTS 16557 Accession Number: BOSTS00339 Description: LEATHER BELT WITH METAL CLASP Material: METAL

Measurements: 416.6 CM LENGTH, 10.16 CM WIDTH

Catalog Number: BOSTS 16558 Accession Number: BOSTS00339 Description: LONG BUNDLE OF RUBBER DRIVE BELT Material: RUBBER

Measurements: 1.27 CM WIDTH

Catalog Number: BOSTS 16559 Accession Number: BOSTS00339 Description: WATSON BREAKER. MISSING FEEDER PIECES. JURY-RIGGED PUSH BROOM

ATTACHED TO ROLLER SECTION.

Material: METAL

Measurements: 81.2 CM HEIGHT, 182.8 CM WIDTH, 160 CM LENGTH

Catalog Number: BOSTS 16560 Accession Number: BOSTS00339 Description: WATSON FINE SPREADER. PILER ATTACHMENT. SHOOT AT CENTER THAT LEADS TO

RODS AND GEARS.

Material: METAL/LEATHER

Measurements: 157.4 CM HEIGHT, 104.1 CM WIDTH, 254 CM LENGTH

Catalog Number: BOSTS 16561

Description: RECTANGLE SHAPED SCREEN, ROUNDED ON ONE END, USED AS MACHINE

GUARD.

Material: METAL

Measurements: 147.3 CM LENGTH, 40.7 CM WIDTH, 17.8 CM DEPTH

Object Name: VALVE, PIPE

Catalog Number: BOSTS 16562

Description: A SERIES OF PIPING AND VALVES Material: METAL Condition: INC/FR Measurements: 139.7 HEIGHT, 86.4 WIDTH

Catalog Number: BOSTS 16563

Description: THREE-SIDED METAL BOX WITH A HINGED SCREEN ON TOP USED AS A GUARD FOR

MACHINERY.

Material: METAL

Measurements: 152.4 CM LENGTH, 119.38 CM WIDTH, 35.6 CM DEPTH

Catalog Number: BOSTS 16564 Accession Number: BOSTS00339 Description: WOODEN SPREADER WITH FOUR HOLES. SQUARE NOTCHES AT ENDS WITH METAL

TRIM. HOLES LINED WITH METAL TRIM.

Material: WOOD

Measurements: 208.3 CM LENGTH, 63.5 CM WIDTH, 12.7 CM HEIGHT

Catalog Number: BOSTS 16567 Accession Number: BOSTS00339 Description: RECTANGULAR BLACK BOARD WITH TWO METAL BRACKETS Material: WOOD/METAL

Measurements: 119.4 CM LENGTH, 27.9 CM WIDTH, 2.54 CM DEPTH

Object Name: BOARD Catalog Number: BOSTS 16568 Accession Number: BOSTS00339 Description: RECTANGULAR SHAPED SPREAD BOARD WITH SIX METAL TRIMMED HOLES.

SQUARE NOTCHES AT ENDS.

Material: WOOD/METAL

Measurements: 208.3 CM LENGTH, 53.3 CM WIDTH, 12.7 CM DEPTH

Catalog Number: BOSTS 16569 Accession Number: BOSTS00339 Description: RECTANGLE BOARD WITH ONE METAL BRACKET.

Material: WOOD/METAL

Measurements: 121.9 CM LENGTH, 30.5 CM WIDTH, 5.1 CM DEPTH

Object Name: SPOOL Catalog Number: BOSTS 16570 Accession Number: BOSTS00427 Description: TWO METAL SPOOLS Material: WOOD/METAL

Measurements: 50.8 CM HEIGHT, 60.9 CM DIAMETER

Object Name: MACHINE Catalog Number: BOSTS 16572 Accession Number: BOSTS00462 Description: TESTING MACHINE MANUFACTURED BY SCOTT FOR DETERMINING STRENGTH OF

YARNS

Material: METAL

Measurements: 203.2 CM HEIGHT, 83.8 CM WIDTH, 71.7 CM DEPTH

Object Name: WEIGHT Catalog Number: BOSTS 16573 Accession Number: BOSTS00462 Description: BOX OF WEIGHTS ASSOCIATED WITH TESTING MACHINE. 6 weights.

Material: METAL

Measurements: 20.5 CM LENGTH, 11.5 CM WIDTH, 6.0 CM DEPTH

Object Name: CREEL Catalog Number: BOSTS 16574 Accession Number: BOSTS00462 Description: WOODEN CREEL FOR SCOTT TESTER, PAINTED GREEN, WITH METAL SHAFTS AND

YARN GUIDES.

Material: METAL

Measurements: 170.1 CM HEIGHT, 106.6 CM WIDTH, 76.2 CM LENGTH

Catalog Number: BOSTS 16575 Accession Number: BOSTS00462 Description: WOODEN CREEL FOR SCOTT TESTER, PAINTED GREEN, WITH METAL SHAFTS AND

YARN GUIDES. BOWES CONTAIN 10 GEARS ABOUT 30.4 CM IN DIAMETER

Material: METAL

Measurements: 170.1 CM HEIGHT, 106.6 CM WIDTH, 76.2 CM LENGTH

Object Name: HOOK Catalog Number: BOSTS 16576 Accession Number: BOSTS00339 Description: 5 LONG METAL HOOKS. SOME HAVE ROPE FRAGMENTS WRAPPED AROUNG THE

STRAIGHT END.

Material: METAL

Measurements: 81.28 CM LENGTH

Catalog Number: BOSTS 16583 Accession Number: BOSTS00339 Description: FRAME PIECE FOR UNIDENTIFIED ROPE-MAKING MACHINERY. METAL BASE, WOOD AND METAL SUPPORT PIECE

Material: WOOD/METAL Condition: FAIR Measurements: 76.2 CM LENGTH, 44.4 CM WIDTH

Object Name: FORMER Catalog Number: BOSTS 16645 Accession Number: BOSTS00267 Description: WATSON LAYER/FORMER SPARK PARTS. HOOKS, WEIGHTS, ETC. IN WOODEN BOX Material: METAL/WOOD

Measurements: 25 CM HEIGHT, 48 CM WIDTH, 91 CM LENGTH

Object Name: REEL Catalog Number: BOSTS 16646 Accession Number: BOSTS00274 Description: 8 REELS TO CARRY YARNS AND ROPE Material: METAL

Measurements: 43.1 CM WIDTH, 66 CM DIAMETER

Object Name: REEL Catalog Number: BOSTS 16647 Accession Number: BOSTS0047 Description: REEL TO CARRY YARNS AND ROPE Material: METAL

Measurements: 53.3 CM WIDTH, 88.9 CM DIAMETER

Object Name: SHAFT, DRIVE Catalog Number: BOSTS 16648 Accession Number: BOSTS00267 Description: WATSON FORMER DRIVE SHAFT. DRIVE SHAFT TO CARRY POWER FROM ELECTRIC

MOTOR TO 4 MACHINES, INCLUDES 5 MOUNTED 10” DIAMETER EEVEL GEARS. GRAY PAINT.

Material: METAL Condition: COM/EX Measurements: 432 CM LENGTH, 18 CM WIDTH

Catalog Number: BOSTS 16649 Accession Number: BOSTS00267 Description: WATSON LAYER SHAFTING. DRIVE SHAFT TO CARRY POWER FROM ELECTRIC

MOTOR TO MACHINE, INCLUDES 2 GEARS AND 16” DIAMETER V-BELT PULLEY

Material: METAL

Measurements: 281.9 CM LENGTH, 22.4 CM WIDTH

Catalog Number: BOSTS 16650 Accession Number: BOSTS00274 Description: 2 CONNECTOR SHAFTS FOR WATSON FORMER, THREADED AT BOTH ENDS WITH 2

BLOCK/CLAMPS

Material: METAL

Measurements: 157.4 CM LENGTH, 2.54 CM LENGTH

Catalog Number: BOSTS 16652 Accession Number: BOSTS00267 Description: WATSON LAYER POWER DRIVE EXTENSION. GEAR MECHANISM THAT MOUNTS ON

END OF ROPE LAYER, SECTION 2 (CONNECTS TO CATALOG #16653). GRAY PAINT.

Material: METAL

Measurements: 66 CM HEIGHT, 78.7 CM WIDTH, 58.4 CM LENGTH

Catalog Number: BOSTS 16653 Accession Number: BOSTS00267 Description: WATSON LAYER POWER DRIVE EXTENSION. GEAR MECHANISM THAT MOUNTS ON

END OF ROPE LAYER, SECTION 1 (CONNECTS TO CATALOG #16652). GRAY PAINT.

Material: METAL

Measurements: 66 CM HEIGHT, 58.4 CM WIDTH, 78.7 CM LENGTH

Catalog Number: BOSTS 16654 Accession Number: BOSTS00267

Description: WATSON LAYER/FORMER SPARE PARTS. GEARS, RUBBER HOUSING, CARDBOARD

BOX WITH NUTS, BOLTS CONTAINED IN RED PLASTIC BOX

Material: METAL/RUBBER/PLASTIC/CARDBOARD

Measurements: 28 CM HEIGHT, 33 CM WIDTH, 33 CM LENGTH

Catalog Number: BOSTS 16655 Accession Number: BOSTS00267 Description: WATSON LAYER/FORMER – SPARK PARTS: REEL, GEAR, BLOCK OF WOOD, CONTAINED IN WOODEN BOX

Material: METAL/WOOD

Measurements: 37 CM HEIGHT, 51 CM WIDTH, 66 CM LENGTH

Catalog Number: BOSTS 16656

Description: WATSON LAYER/FORMER – SPARE PARTS: GEARS, CLOTH, CRUMPLED

NEWSPAPERS CONTAINED IN WOODEN BOX WITH WOODEN TOP

Material: METAL/WOOD/CLOTH/NEWSPAPER

Measurements: 31.5 CM HEIGHT, 26.5 CM WIDTH, 42 CM LENGTH

Catalog Number: BOSTS 16663 Accession Number: BOSTS00274 Description: 2 CREELS FOR HOLDING BOBBINS CONTAINING YARN TO FEED WATSON FORMER, PAINTED GRAY.

Material: METAL

Measurements: 134.6 CM HEIGHT, 60.9 CM WIDTH, 160 CM LENGTH

Catalog Number: BOSTS 16664

Description: PILER ATTACHMENT – WATSON FINE SPREADER Material: METAL

Measurements: 152.4 CM HEIGHT, 101.6 CM WIDTH, 66 CM LENGTH

Catalog Number: BOSTS 16667 Accession Number: BOSTS00339 Description: MACHINE GUARD. BLACK WIRE MESH WITH METAL CASTING AT SIDES, OVAL

SHAPE.

Material: METAL

Measurements: 15 CM HEIGHT, 91.4 CM WIDTH, 188 CM LENGTH

Catalog Number: BOSTS 16668 Accession Number: BOSTS00339 Description: MACHINE GUARD. WIRE MESH WITH METAL CASING AT SIDES, PAINTED ORANGE.

OVAL SHAPE.

Material: METAL

Measurements: 15 CM HEIGHT, 91.4 CM WIDTH, 188 CM LENGTH

Object Name: BAR Catalog Number: BOSTS 16670 Accession Number: BOSTS00339 Description: METAL BAR, TAPERS AT ONE END, FLARES TO FORM CIRCLES AT OTHER END, 1

HOLE IN CIRCLE, 1 HOLE ALONG SHAFT. TRACES OF GREEN PAINT.

Material: METAL

Measurements: 2 CM HEIGHT, 7.6 CM WIDTH, 92.7 CM LENGTH

Catalog Number: BOSTS 16674 Accession Number: BOSTS00339 Description: SHAFTING AND MOUNTS FOR WATSON MACHINERY. WHEEL AT ONE END, LOOSE

JUTE WRAPPED AROUND SHAFT, PIECE OF ROPE TIED TO SHAFT.

Material: METAL/ROPE

Measurements: 50.8 CM HEIGHT, 144.8 CM LENGTH

Catalog Number: BOSTS 16677 Accession Number: BOSTS00339 Description: METAL BAR, FLAT ON ONE SIDE, PEAKED RIDGE RNNING ALONG CENTER OF OTHER

SIDE, SEVERAL HOLES ALONG EDGES.

Material: METAL

Measurements: 6.4 CM HEIGHT, 12.7 CM WIDTH, 182.8 CM LENGTH

Object Name: HOOK Catalog Number: BOSTS 16679 Accession Number: BOSTS00339 Description: METAL BAR BENT INTO LARGE HOOK AT ONE END, HOOK IS SOLDERED ONTO

LONG METAL BAR

Material: METAL

Measurements: 155 CM LENGTH, 2.54 CM DIAMETER

Object Name: TUBE Catalog Number: BOSTS 16680 Accession Number: BOSTS00339 Description: METAL TUBE, 1 END ATTACHED TO HOLLOW, ELBOW SHAPED CONNECTOR PIECE Material: METAL

Measurements: 71.2 CM LENGTH, 4.1 CM DIAMETER

Object Name: BELT, FAN Catalog Number: BOSTS 16750 Accession Number: BOSTS00267 Description: BOX OF 12 FAN BELTS FOR WATSON LAYER/FORMER MACHINES. EACH BELT IS

COILED INTO THREE LOOPS.

Material: RUBBER

Measurements: 1.9 CM WIDTH, 69.8 CM DIAMETER

Catalog Number: BOSTS 16754 Accession Number: BOSTS00450 Description: SIX REGISTER PLATES FOR HASKELL-DAWES FORMER MACHINES. PLATES ARE TIED

TOGETHER WITH ROPE. THE PLATES ARE CAST IRON DISK WITH MANY HOLES DRILLED

THROUGH THEM.

Material: METAL (CAST IRON)

Measurements: 21.5 CM DIAMETER

Object Name: BELT, FAN Catalog Number: BOSTS 16755 Accession Number: BOSTS00450 Description: SIX V BELT FOR HASKELL-DAWES FORMER MACHINE Material: RUBBER

Measurements: 29.2 CM DIAMETER

Object Name: WHEEL Catalog Number: BOSTS 16758 Accession Number: BOSTS00339 Description: LARGE WHEEL WITH SIX SPOKES Material: METAL (CAST IRON)/METAL (STEEL)

Measurements: 22.9 CM DEPTH, 114.3 CM DIAMETER

Object Name: SCREEN Catalog Number: BOSTS 16759 Accession Number: BOSTS00339 Description: LARGE THREE-DIMENSIONAL METAL MACHINE GUARD. PAINTED ORANGE. THREE

SIDES AND TOP OF GUARD ARE COVERED WITH METAL SCREEN

Material: METAL

Measurements: 76.2 CM HEIGHT, 33 CM WIDTH, 102.9 CM LENGTH

Catalog Number: BOSTS 16760 Accession Number: BOSTS00339 Description: THREE-DIMENSIONAL METAL MACHINE GUARD FOR WATSON SPREADER. PAINTED

BLACK. FOURS SIDES COVERED IN METAL SCREEN.

Material: METAL

Measurements: 63.5 CM HEIGHT, 25.4 CM WIDTH, 83.8 CM LENGTH

Catalog Number: BOSTS 16761 Accession Number: BOSTS00339 Description: THREE-DIMENSIONAL METAL MACHINE GUARD PAINTED BLACK. FOUR SIDES

COVERED IN METAL GRATING.

Material: METAL

Measurements: 64.8 CM HEIGHT, 25.4 CM WIDTH, 83.8 CM LENGTH

Catalog Number: BOSTS 16762 Accession Number: BOSTS00339 Description: THREE-DIMENSIONAL METAL MACHINE GUARD FOR WATSON SPREADER. PAINTED

ORANGE. FOUR SIDES COVERED IN METAL SCREEN.

Material: METAL

Measurements: 155 CM HEIGHT, 30.5 CM WIDTH, 96.5 CM LENGTH

Catalog Number: BOSTS 16765 Accession Number: BOSTS00339 Description: METAL MACHINE GUARD WITH METAL SCREENING COVERING FOUR SIDES.

Material: METAL

Measurements: 147.3 CM HEIGHT, 38.1 CM WIDTH, 81.3 CM LENGTH

Catalog Number: BOSTS 16766 Accession Number: BOSTS00339 Description: THREE-DIMENSIONAL SMALL METAL MACHINE GUARD SHAPED LIKE A DOME

WITH METAL SLATS ON THE FRONT SURFACE.

Material: METAL

Measurements: 40.6 CM HEIGHT, 20.3 CM WIDTH, 39.4 CM LENGTH

Object Name: CLAMP Catalog Number: BOSTS 16767 Accession Number: BOSTS00339 Description: “L” SHAPED WATSON MACHINE CLAMP. CLAMP HASS THREE HOLES ON SIDE OF

SHAFT. THERE IS A BOLT ON EITHER SIDE TO SECURE CLAMP.

Material: METAL

Measurements: 34.3 CM LENGTH, 5.1 CM WIDTH, 10.8 CM DEPTH

Catalog Number: BOSTS 16774 Accession Number: BOSTS00339 Description: CAST IRON MACHINE FRAME PIECE Material: CAST IRON

Measurements: 89 CM HEIGHT, 26.7 CM LENGTH, 11.4 CM WIDTH

Catalog Number: BOSTS 16775 Accession Number: BOSTS00339 Description: RECTANGLE SHAPED PIECE OF CAST IRON WITH TWO SQUARE HOLES ON ONE

SIDE

Material: CAST IRON

Measurements: 66 CM HEIGHT, 15.2 CM LENGTH, 11.43 CM WIDTH

Object Name: COMB Catalog Number: BOSTS 16776 Accession Number: BOSTS00339 Description: 12 STEEL COMBS Material: METAL

Measurements: 96.5 CM LENGTH, 17.8 CM WIDTH

Catalog Number: BOSTS 16777 Accession Number: BOSTS00339 Description: METAL FRAME PART COMPOSED OF SEVERAL CAST IRON PIECES. THERE IS A BAR

DOWN THE CENTER WITH MANY HOLES.

Material: METAL

Measurements: 20.3 CM HEIGHT, 15.2 CM WIDTH, 109.2 CM LENGTH

Catalog Number: BOSTS 16778 Accession Number: BOSTS00339 Description: C-SHAPED CLAMP WITH LARGE SCREW Material: METAL

Measurements: 24.1 CM LENGTH, 5.1 CM WIDTH, 7.6 CM DEPTH

Catalog Number: BOSTS 16779 Accession Number: BOSTS00339 Description: TWO METAL RECTANGULAR CAST IRON MACHINE PARTS. PIECES ARE HOLLOW.

EACH HAS THREE HOLES DRILLED THROUGH THE CENTER AND ODD SHAPED METAL PIECES

ATTACHED.

Material: METAL

Measurements: 41.9 CM HEIGHT, 3.81 CM WIDTH, 10.2 CM LENGTH

Catalog Number: BOSTS 16780 Accession Number: BOSTS00339 Description: TUBE SHAPED IRON BAR THAT HAS TWO L-SHAPED BENDS TOWARDS THE MIDDLE.

CIRCLE AT CENTER OF BOTH BENDS.

Material: CAST IRON

Measurements: 40.7 CM LENGTH, 1.3 CM DIAMETER

Catalog Number: BOSTS 16781 Accession Number: BOSTS00339 Description: C-SHAPED CLAMP WITH LARGE SCREW Material: CAST IRON

Measurements: 30.5 CM LENGTH, 7.6 CM WIDTH

Catalog Number: BOSTS 16782 Accession Number: BOSTS00339 Description: LARGE RECTANGULAR CHUNK OF CAST IRON Material: METAL

Measurements: 35.6 CM LENGTH, 11.4 CM WIDTH

Catalog Number: BOSTS 16783 Accession Number: BOSTS00339 Description: TWO METAL BARS, POSSIBLE FRAME PIECES, WITH LINE OF SMALL HOLES DRILLED

DOWN CENTER OF EACH BAR. THERE ARE ADDITIONAL HOLES ON THE END OF EACH PIECE AND

ALSO AN EXTRA CUBE OF METAL SOLDERED ON ONE END OF EACH WITH HOLES IN IT

Material: METAL

Measurements: 3.8 CM HEIGHT, 12.7 CM WIDTH, 55.9 CM LENGTH

Object Name: BOARD Catalog Number: BOSTS 16845 Accession Number: BOSTS00339 Description: RECTANGULAR WOODEN SPREAD BOARD WITH TEN HOLES Material: WOOD/METAL

Measurements: 365.7 CM LENGTH, 66 CM WIDTH, 15.8 CM DEPTH

Catalog Number: BOSTS 16846 Accession Number: BOSTS00339 Description: WOODEN BOX CONTAINING APPROXIMATELY 60 STEEL COMBS USED IN ROPE-

MAKING.

Material: WOOD/METAL

Measurements: 60.9 CM LENGTH, 11.4 CM WIDTH

Catalog Number: BOSTS 16847 Accession Number: BOSTS00339 Description: CAST IRON FRAME END FOR UNIDENTIFIED ROPE-MAKING MACHINERY Material: METAL Condition: INC/FR Measurements: 124.4 CM LENGTH, 50.8 CM WIDTH, 30.4 CM DEPTH

Object Name: DRUM Catalog Number: BOSTS 16848 Accession Number: BOSTS0339 Description: ORANGE DRUM FILLED WITH SPARE MACHINE PARTS FOR ROPE-MAKING Material: METAL

Measurements: 57.5 CM HEIGHT, 13.4 CM DIAMETER

Object Name: BOLT Catalog Number: BOSTS 16849 Accession Number: BOSTS00339 Description: WOODEN BOX CONTAINING 105 BOLTS FOR ROPE-MAKING MACHINERY Material: METAL

Measurements: 8.8 CM LENGTH, 6.3 CM WIDTH, 5.7 CM HEIGHT

Catalog Number: BOSTS 16850 Accession Number: BOSTS00339 Description: BUCKET CONTAINING 65 BOLTS FOR ROPE-MAKING MACHINERY Material: METAL

Catalog Number: BOSTS 16851 Accession Number: BOSTS00339 Description: BUCKET CONTAINING 65 BOLTS FOR ROPE-MAKING MACHINERY Material: METAL

Catalog Number: BOSTS 16852 Accession Number: BOSTS00339 Description: WATSON MACHINE GUARD. BLACK GRATED RECTANGULAR SHAPED OBJECT WITH

ROPE TIED TO BASE.

Material: METAL/HEMP

Measurements: 154.9 CM LENGTH, 99 CM WIDTH, 26 CM DEPTH

Catalog Number: BOSTS 16853 Accession Number: BOSTS00339 Description: TWO SUPPORTS FOR A WATSON MACHINE GUARD Material: METAL

Measurements: 95.8 CM LENGTH, 15.2 CM WIDTH, 66 CM DEPTH

Catalog Number: BOSTS 16854 Accession Number: BOSTS00339 Description: PIPING PIECE FOR A WATSON MACHINE GUARD Material: METAL

Measurements: 31.7 CM LENGTH, 12.7 CM WIDTH, 4.4 CM DEPTH

Catalog Number: BOSTS 16949 Accession Number: BOSTS00339 Description: FRAME SECTIONS FOR WATSON MACHINERY. (13 PIECES) Material: METAL

Measurements: 182.9 CM LENGTH

Object Name: FINISHER Catalog Number: BOSTS 16950 Accession Number: BOSTS00339 Description: WOODEN FINISHER PAINTED BLACK WITH YELLOW LETTERS.

Material: WOOD

Measurements: 50.8 CM LENGTH, 20.3 CM WIDTH, 5.1 CM HEIGHT

Catalog Number: BOSTS 16951 Accession Number: BOSTS00339 Description: PILER FOR COARSE SPREADER Material: METAL

Measurements: 152 CM HEIGHT, 114 CM WIDTH, 71 CM LENGTH

Catalog Number: BOSTS 16952 Accession Number: BOSTS00339 Description: 120 COMBS FOR COARSE SPREADER Material: METAL

Measurements: 61 CM LENGTH, 63.5 CM WIDTH

Catalog Number: BOSTS 16953 Accession Number: BOSTS00339 Description: 17 GEARS FOR WATSON MACHINERY, STRUNG TOGETHER Material: METAL

Measurements: 12.7 CM

Catalog Number: BOSTS 16954 Accession Number: BOSTS00339 Description: GEARS FOR WATSON MACHINERY Material: METAL

Measurements: 8.9 CM, 33.02 CM DIAMETER

Object Name: FEEDER Catalog Number: BOSTS 16955 Accession Number: BOSTS00339 Description: FEEDER FOR WATSON BREAKER Material: METAL

Measurements: 89 CM LENGTH, 35.7 CM WIDTH, 17.8 CM HEIGHT

Catalog Number: BOSTS 16956 Accession Number: BOSTS00339 Description: MACHINE GUARD, PERFORATED, FOR WATSON BREAKER Material: METAL

Measurements: 127 CM LENGTH, 42 CM WIDTH, 17.8 CM HEIGHT

Object Name: SUPPORT Catalog Number: BOSTS 16957 Accession Number: BOSTS00339 Description: 8 SUPPORT PIECES FOR WATSON BREAKER FEEDER APPARATUS.

Material: METAL

Measurements: 152.4 CM LENGTH, 5.08 CM DIAMETER

Catalog Number: BOSTS 16958 Accession Number: BOSTS00339 Description: MACHINE GUARD FOR WATSON BREAKER.

Material: METAL

Measurements: 185.4 CM HEIGHT, 96.5 CM WIDTH, 28 CM LENGTH

Catalog Number: BOSTS 16959 Accession Number: BOSTS00339 Description: FEEDER FOR WATSON BREAKER.

Material: METAL

Measurements: 71.1 CM LENGTH, 25.4 CM WIDTH, 20.32 CM DEPTH

Catalog Number: BOSTS 16960 Accession Number: BOSTS00339 Description: FEEDER FOR WATSON BREAKER.

Material: METAL

Measurements: 97.8 CM LENGTH, 38.1 CM WIDTH, 10.2 CM DEPTH

Catalog Number: BOSTS 16961 Accession Number: BOSTS00339 Description: SUPPORT POST FOR WATSON BREAKER MACHINE GUARD USED IN ROPE-MAKING.

Material: METAL

Measurements: 81.3 CM LENGTH, 12.7 CM WIDTH, 5.1 CM DEPTH

Catalog Number: BOSTS 16962 Accession Number: BOSTS00339 Description: SUPPORT POST FOR WATSON BREAKER MACHINE GUARD.

Material: METAL

Measurements: 81.3 CM LENGTH, 12.7 CM WIDTH, 5.1 CM DEPTH

Object Name: TRAP Catalog Number: BOSTS 16963 Accession Number: BOSTS00339 Description: TRAP FOR PUMP ON LUBRICATING TANK USED FOR ROPE-MAKING MACHINERY.

Material: METAL

Measurements: 33 CM HEIGHT, 38.1 CM WIDTH, 12.7 CM LENGTH

Catalog Number: BOSTS 16964 Accession Number: BOSTS00339 Description: 2 GEARS ROPED TOGETHER.

Material: METAL

Measurements: 8.9 CM HEIGHT, 15.2 CM WIDTH

Catalog Number: BOSTS 16965 Accession Number: BOSTS00339 Description: PIPE WITH LARGE WRENCH IN ONE END, STEEL ROD IN THE OTHER END.

Material: METAL

Measurements: 182.9 CM LENGTH, 12.7 CM WIDTH, 5.1 CM DIAMETER

Catalog Number: BOSTS 16966 Accession Number: BOSTS00339 Description: METAL BAR, FLATTENED AT ONE END.

Material: METAL

Measurements: 101.6 CM LENGTH, 3.8 CM WIDTH

Chain Forge Objects (101 Items)

Object Name: DIE Catalog Number: BOSTS 15182 Accession Number: BOSTS00020 Description: RECTANGULAR BOX-SHAPED DIE WITH 6 OCTAGONAL SOCKET BOLTS SET INTO

TOP & 3 BOLTS ON LEFT & RIGHT SIDES. 22 ½” LONG CROSS-SHAPED BAR SET INTO TOP.

SIMILAR TO BOSTS 15187 MARKED “SLING SHACKLE”

Material: STEEL

Measurements: 32 CM HEIGHT, 46 CM WIDTH, 66.3 CM LENGTH, ~766 KG

Catalog Number: BOSTS 15183 Accession Number: BOSTS00020 Description: SLING RING, SQUARE BLOCK WITH 1 ½” HIGH KEY ON TOP, IDENTIFICATION IN

YELLOW PAINT ON SIDE.USED TO FORGE SLING RING

Material: STEEL

Measurements: 22.5 CM HEIGHT, 39 CM WIDTH, 38.5 CM LENGTH, ~265 KG

Catalog Number: BOSTS 15184 Accession Number: BOSTS00020 Description: R.S. SHACKLE, 1 1/8 – 1 ¼ BOX-LIKE SHAPE WITH SUNKEN OCTAGONAL BOLTS ON

TOP. USED TO MAKE SHACKLE

Material: STEEL

Measurements: 27.5 CM HEIGHT, 55.7 CM WIDTH, 63 CM LENGTH, ~ 757 KG

Catalog Number: BOSTS 15185 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCL, 8” WIDE, 1 ¾” HIGH BLOCK CENTERED ON TOP.

USED TO FORGE SHAPE, USE UNKNOWN

Measurements: 21 CM HEIGHT, 30 CM WIDTH, 41 CM LENGTH, ~203 KG

Catalog Number: BOSTS 15186 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCK MARKED HARDTEM, 8” WIDE, 1 ¾” HIGH BLOCK

CENTERED ON TOP. USED TO FORGE SHAPE, USE UNKNOWN

Material: STEEL

Measurements: 21 CM HEIGHT, 30 CM WIDTH, 41 CM LENGTH, ~203 KG

Catalog Number: BOSTS 15187 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BOX-SHAPED WITH 6 OCTAGONAL SOCKET BOLTS SET INTO TOP & 3 BOLTS ON LEFT & RIGHT SIDES. 22 ½” LONG CROSS-SHAPED BAR SET INTO TOP.

SIMILAR TO BOSTS 15182

Material: STEEL

Measurements: 32 CM HEIGHT, 46 CM WIDTH, 66.3 CM LENGTH, ~766 KG

Catalog Number: BOSTS 5188 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCK, 8” WIDE, 2” HIGH KEY BLOCK ON TOP. USED TO

MAKE THREE IDENTICAL UNIDENTIFIED SHAPES

Material: STEEL

Measurements: 28 CM HEIGHT, 49 CM WIDTH, 66.5 CM LENGTH, ~716 KG

Catalog Number: BOSTS 15189 Accession Number: BOSTS00020 Description: FORGING, BOX-SHAPED WITH TWO BOLTS ON EACH SIDE AT TOP, 3 ½” HIGH KEY

BLOCK ON TOP CENTER. USED TO MAKE UNIDENTIFIED SHAPE

Material: STEEL

Measurements: 38 CM HEIGHT, 25.5 CM WIDTH, 54.6 CM LENGTH, ~415 KG

Catalog Number: BOSTS 15190 Accession Number: BOSTS00020

Description: FORGING, RECTANGULAR BLOCK, 8” WIDE, 2” HIGH KEY BLOCK ON TOP. USED TO

MAKE THREE IDENTICAL UNIDENTIFIED SHAPES

Material: STEEL

Measurements: 28 CM HEIGHT, 49 CM WIDTH, 66.5 CM LENGTH, ~716 KG

Catalog Number: BOSTS 15191 Accession Number: BOSTS00020 Description: FORGING, ROUGHLY OVAL IN 3 LEVELS, MIDDLE PIECE LONGEST WITH RECTANGULAR HOLE, TOP PIECE WITH KEY HOLE-SHAPED SLOT & 4 OCTAGONAL BOLTS SET IN.

USED TO MAKE UNIDENTIFIED SHAPE

Material: STEEL

Measurements: 9 CM HEIGHT, 36 CM WIDTH, 52 CM LENGTH, ~132 KG

Catalog Number: BOSTS 15192 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR FLAT 1 3/16” THICK PLATE WITH 4 HOLES & 2 SLOTS, 8”

WIDE, 3” HIGH SLOTTED BAR ON TOP CENTER WITH HEX BOLTS AT CORNERS. USED TO MAKE

UNIDENTIFIED SHAPE

Material: STEEL

Measurements: 10 CM HEIGHT, 49 CM WIDTH, 56.5 CM LENGTH, ~217 KG

Catalog Number: BOSTS 15193 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR WITH 3” WIDE, 1” HIGH KEY ACROSS CENTER, TWO 3 ½”

WIDE SLOTS ON FACE. USED TO MAKE UNIDENTIFIED SHAPE

Measurements: 11 CM HEIGHT, 15.5 CM WIDTH, 40.5 CM LENGTH, ~54 KG

Catalog Number: BOSTS 15194 Accession Number: BOSTS00020 Description: FORGING, SQUARE BLOCK WITH 1” THICK 11” DIAMETER RING CUT INTO FACE. 6”

WIDE, 1 ½” HIGH KEY BAR ON TOP. USED TO FORGE RING

Measurements: 24 CM HEIGHT, 37 CM WIDTH, 37.7 CM LENGTH, ~263 KG

Catalog Number: BOSTS 15195 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCK WITH 6” WIDE, 1 3/16” HIGH KEY BLOCK DOWN

TOP CENTER WITH 3 ½” SQUARE CUT INTO KEY BLOCK. USED TO FORGE UNIDENTIFIED SHAPE

Material: STEEL

Measurements: 24 CM HEIGHT, 42 CM WIDTH, 47.5 CM LENGTH, ~370 KG

Catalog Number: BOSTS 15196 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR WITH 6” WIDE, 1 3/8” HIGH KEY BLOCK ON TOP.

SIMILAR TO BOSTS 15198

Material: STEEL

Measurements: 21 CM HEIGHT, 23 CM WIDTH, 33.5 CM LENGTH, ~127 KG

Catalog Number: BOSTS 15197 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCK WITH 6” KEY BLOCK 1 7/8” HIGH SLOTTED. USED

TO FORGE UNIDENTIFIED SHAPE

Material: STEEL

Measurements: 25.5 CM HEIGHT, 29.5 CM WIDTH, 41 CM LENGTH, ~242 KG

Catalog Number: BOSTS 15198 Accession Number: BOSTS00020 Description: FORGING, RECTANGULAR BLOCKS WITH 6” WIDE, 1 3/8” HIGH KEY BLOCK ON TOP.

SIMILAR TO BOSTS 15196

Material: STEEL

Measurements: 21 CM HEIGHT, 23 CM WIDTH, 33.5 CM LENGTH, ~127 KG

Catalog Number: BOSTS 15199 Accession Number: BOSTS00020 Description: FORGING DIE, RECTANGULAR BLOCK WITH 5 ¾” WIDE, 1 7/8” HIGH KEY BLOCK ON

TOP.USED TO FORGE UNIDENTIFIED SHAPE.

Material: STEEL

Measurements: 25.7 CM HEIGHT, 30.8 CM WIDTH, 43 CM LENGTH, ~267 KG

Catalog Number: BOSTS 15200 Accession Number: BOSTS00020 Description: FORGING DIE, RECTANGULAR BLOCK WITH 6” WIDE, 1 ¾” HIGH KEY BLOCK ON

TOP. USED TO FORGE DOUBLE HOLE RING.

Material: STEEL

Measurements: 24.5 CM HEIGHT, 30 CM WIDTH, 42.5 CM LENGTH, ~245 KG

Catalog Number: BOSTS 15201 Accession Number: BOST00020 Description: FORGING DIE, BOX-SHAPED WITH 2 BOLTS AT TOP OF LEFT & RIGHT SIDE. BOTTOM

PLATE SLOTTED & EXTENDS 3” BEYOND BOX. USED TO MAKE SISTER HOOK

Material: STEEL

Measurements: 22.5 CM HEIGHT, 32 CM WIDTH, 48.3 CM LENGTH, ~273 KG

Catalog Number: BOSTS 15202 Accession Number: BOSTS00020 Description: FORGING DIE RECTANGULAR BLOCK WITH 6” WIDE, 1 ¼” HIGH KEY BLOCK ON TOP.

USED TO MAKE LARGE LINK

Material: STEEL

Measurements: 36 CM HEIGHT, 41 CM WIDTH, 58.5 CM LENGTH, ~678 KG

Catalog Number: BOSTS 15203 Accession Number: BOSTS00020 Description: FORGING DIE, RECTANGULAR BLOCK WITH 2 HOOK-SHAPED CAVITIES ON FACE. 6”

WIDE, 1 ¼” HIGH KEY BLOCK ACROSS TOP. USED TO FORGE HOOK

Material: STEEL

Measurements: 22 CM HEIGHT, 26 CM WIDTH, 37.8 CM LENGTH, ~170 KG

Catalog Number: BOSTS 15204 Accession Number: BOSTS00020 Description: FORGING DIE, RECTANGULAR BLOCK WITH 6” WIDE, 1 3/8” HIGH KEY BLOCK ON

TOP LENGTH. SIMILAR TO BOSTS 15206. USED TO FORGE CLOSED END COTTER PIN SHAPE

Material: STEEL

Measurements: 26 CM HEIGHT, 40.6 CM WIDTH, 63.3 CM LENGTH, ~525 KG

Catalog Number: BOSTS 15205

Description: FORGING DIE, SQUARE BLOCK WITH 6” WIDE, 1 1/1” HIGH KEY BLOCK ON TOP.

USED TO FORGE SLING RING

Material: STEEL

Measurements: 22.5 CM HEIGHT, 38.3 CM WIDTH, 38.3 CM LENGTH, ~259 KG

Catalog Number: BOSTS 15206 Accession Number: BOSTS00020 Description: FORGING DIE, RECTANGULAR BLOCK WITH 6” WIDE, 1 3/8” HIGH KEY BLOCK.

SIMILAR TO BOSTS 15204. USED TO FORGE CLOSED END COTTER PIN SHAPE

Material: STEEL

Measurements: 26 CM HEIGHT, 40.6 CM WIDTH, 63.3 CM LENGTH, ~525 KG

Catalog Number: BOSTS 15207 Accession Number: BOSTS00020 Description: FORGING DIE, LARGE BOX-SHAPED W/2 BOLTS ON 2 CLOSED SIDES & SLOTTED BOTTOM EXTENDING 2 ¾” ON OPEN SIDES. TOP HAS 10 RECESSED HEX BOLTS & 19” DIAMETER

OPENING. USED TO MAKE SLING RING

Material: STEEL

Measurements: 35 CM HEIGHT, 81.5 CM WIDTH, 85.5 CM LENGTH, ~1915 KG

Catalog Number: BOSTS 15208 Accession Number: BOSTS00020 Description: FORGING DIE, SQUARE BLOCK WITH LINK-SHAPED CAVITY ON FACE. 6” WIDE, 1 ½”

HIGH KEY BLOCK ON TOP. USED TO FORGE SHORT LINK

Material: STEEL

Measurements: 28.5 CM HEIGHT, 41.5 CM WIDTH, 40.8 CM LENGTH, ~379 KG

Catalog Number: BOSTS 15209 Accession Number: BOSTS00020 Description: FORGING DIE, SQUARE BLOCK WITH LINK-SHAPED CAVITY ON FACE. 6” WIDE, 1 ½”

HIGH KEY BLOCK ON TOP. USED TO FORGE SHORT LINK

Material: STEEL

Measurements: 28.8 CM HEIGHT, 40.8 CM WIDTH, 40.5 CM LENGTH, ~374 KG

Catalog Number: BOSTS 15210 Accession Number: BOSTS00020…