472.23025.TAP Baraga Correctional Facility (AMF) - Shower Upgrades Project - Addendum 1.pdf

PDF 2 MB Posted May 13, 2025

Attached to: 472/23025. TAP; Baraga CF - Shower Upgrades Project
Solicitation number: RFQ 171 250000000362 4
Issued by: Baraga County, Michigan

About this file

Written by GovTribe AI · Mar 13, 2026

This is Construction Bid Addendum No. 1 issued by the Michigan Department of Technology, Management and Budget (DTMB), State Facilities Administration Design and Construction Division for the Baraga Correctional Facility (AMF) Shower Upgrades Project. The project involves replacing shower cabinets and related infrastructure across three housing units at the correctional facility located in Baraga, Michigan. The work includes installation of new stainless steel shower cabinets (34" x 34" x 84" or 85" depending on unit), epoxy flooring systems, stainless steel wall panels, security mirrors, and ceiling systems. The addendum, issued on April 17, 2025, clarifies and modifies four sheets of the bidding documents: Sheet A-104, A-200, ALT-A-102, and ALT-A-200, with alterations to construction notes, elevations, and sections. The bid opening date is scheduled for May 14, 2025. Construction is phased to begin in Housing Unit 8 (currently unoccupied), followed by Housing Unit 3 (with potential inmate relocation coordination), and finally Housing Unit 2 (requiring up to three weeks for inmate movement before work can commence).

The addendum specifies that bidders must acknowledge receipt of all addenda in the bid submission, with failure to do so potentially resulting in bid rejection. Key project requirements include field verification of existing shower cabinet dimensions, floor drain alignment, and HVAC ductwork locations prior to submitting shop drawings. The design basis specifies I-CON Systems, Inc. shower cabinets, Bradley security mirrors, and Armstrong Metalworks ceiling systems. The project file number is 472/23025.TAP with consultant job number 23329.00, managed by Matrix Consulting Engineers, Inc. (Project Director: Tom Pawlowski). The professional firm Devon Pung approved the addendum on behalf of Matrix Consulting Engineers on April 17, 2025. Specific construction details include 14-gauge 304 stainless steel panels, epoxy flooring finish (EP-1), security caulking systems, and specialized ceiling support details with expansion anchors secured to precast concrete planks.

View the file

Other files

File	Type	Posted
Baraga Correctional Facility - Shower Upgrades Project - CD Drawings.pdf	PDF	May 13, 2025
472.23025.TAP Baraga Correctional Facility (AMF) - Shower Upgrades Project - Addendum 2.pdf	PDF	May 13, 2025
Baraga Correctional Facility - Shower Upgrades Project - CD Specifications.pdf	PDF	May 13, 2025
DTMB-0415 Advertisement (Rev 9-24).pdf	PDF	May 13, 2025
LEIN Request 23025.pdf	PDF	May 13, 2025
Service Disabled Veteran Owned Business Info Sheet 2025.pdf	PDF	May 13, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DTMB-0414 (Rev 12/17)

DEPARTMENT OF TECHNOLOGY, MANAGEMENT AND BUDGET

State Facilities Administration Design and Construction Division

CONSTRUCTION BID ADDENDUM NO. 1

This form identifies an Addendum to Bidding Documents, and incorporates interpretations or clarifications, modifications, acceptance of proposed “or equal” materials, and other information into the Bidding Documents. Addenda will be numbered by the Professional and distributed through www.michigan.gov/SIGMAVSS as an attachment.

TO:

ALL BIDDERS

DATE ISSUED

4/17/2025

PROJECT NAME

Baraga Correctional Facility (AMF) - Shower Upgrades

FILE NUMBER

472/23025.TAP

PROFESSIONAL

Matrix Consulting Engineers, Inc.

PROJECT DIRECTOR

Tom Pawlowski

BID OPENING DATE:

5/14/2025

ADDENDUM ITEMS: (attach additional sheets and drawings if required)

1. Clarification Sheet A-104 (Sheet Reissued): Altered Construction Note 2

2. Clarification Sheet A-200 (Sheet Reissued): Modified Elecation 2 and Section 9

3. Clarification Sheet ALT-A-102 (Sheet Reissued): Altered Construction Note 12

4. Clarification Sheet ALT-A-200 (Sheet Reissued): Modified Elecation 1 and Section 6

ACKNOWLEDGMENT: This Addendum must be acknowledged by the Bidder in the space provided in the Bid Summary and Bid Form. Failing to acknowledge Addenda may be cause for the Bid to be rejected. Addenda will become part of the Contract Documents.

PROFESSIONAL: Devon Pung, Matrix Consulting Engineers DATE: 4/17/2025 APPROVED BY: Tom Pawlowski PROJECT DIRECTOR: Tom Pawlowski DATE: 4/17/2025 http://www.michigan.gov/SIGMAVSS

KEY PLAN

SCALE: NTS

wing A wing C wing B wing D

PLAN

NORTH

LOWER LEVEL

UPPER LEVEL

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

A R

C H

C T

M a t r ix D

O F

H N

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 3 - WING B

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 3 - WING A

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 3 - WING D

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 3 - WING C

AutoCAD SHX Text

%%UCONSTRUCTION NOTES

AutoCAD SHX Text

LCD27

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

AutoCAD SHX Text FILL DEPRESSED FLOOR AREA WITH EPOXY GROUT AS A RESULT OF REMOVING EXISTING THRESHOLD

AutoCAD SHX Text

AutoCAD SHX Text PROVIDE NEW FRONT MOUNTED SECURITY FRAME MIRROR SA05 BY 'BRADLEY' OR EQUAL ON WALL IN CHANGING AREA. CENTER OF MIRROR AT 60" A.F.F.

AutoCAD SHX Text

AutoCAD SHX Text PROVIDE NEW STAINLESS STEEL METAL PANELS TO CONCEAL GAP BETWEEN CABINET AND WALL. FINISH TO MATCH INSIDE OF SHOWER CABINETS. EASE OR GRIND ALL SHARP EDGES ON PANELS. SEE ELEVATION NO. 2 AND DETAIL NO. 6 ON SHEET A-200.

AutoCAD SHX Text

2 (SIM.)

AutoCAD SHX Text A200

AutoCAD SHX Text

AutoCAD SHX Text A200

AutoCAD SHX Text

5 (SIM.)

AutoCAD SHX Text A200

AutoCAD SHX Text

AutoCAD SHX Text A200

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW EPOXY FLOORING (EP-1) AND 6" UP WALL. SEE DETAIL NO. 6 ON SHEET A-200. INSTALL PER MANUFACTURER'S INSTALLATION INSTRUCTIONS. SLOPE NEW EPOXY TO FLOOR DRAINS AS REQUIRED.

AutoCAD SHX Text PROVIDE NEW 14 GAUGE 304 STAINLESS STEEL METAL PANELS ON ALL EXPOSED WALLS IN SHOWER CHANGING AREAS. FINISH TO MATCH INSIDE OF SHOWER CABINETS. EASE OR GRIND PANELS AS REQUIRED. SEE DETAIL NO. 6 ON SHEET A-200.

AutoCAD SHX Text PROVIDE NEW STAINLESS STEEL 34" X 34" X 84" SHOWER CABINETS WITH TOUCH CONTROLS, SHOWER HEAD, AND RECESSED SOAP DISH, BASIS OF DESIGN IS 'I-CON SYSTEMS, INC.' SHOWER CABINET TO BE CENTERED WITHIN EXISTING SHOWER STALL. SEE PLUMBING DRAWINGS.

AutoCAD SHX Text REMOVE ALL LOOSE RUST ON EXISTING GATE DOOR AND FRAME. REMOVE ALL PAINT DOWN TO BARE METAL. MUST BE MECHANICALLY (WIRE BRUSHED), HAND TOOL, OR POWER TOOL REMOVED. PRIME AND PAINT (P-1). REINSTALL GATE DOORS WITH TAMPER RESISTANT FASTENERS TO MATCH EXISTING AS REQUIRED. WELD HINGES AS REQUIRED.

AutoCAD SHX Text

AutoCAD SHX Text 23329.00

AutoCAD SHX Text

472/23025.TAP

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text contract order no.

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR E. CHAVEZ AVE

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

AutoCAD SHX Text 23329.00

AutoCAD SHX Text funding code

AutoCAD SHX Text sheet description

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

BARAGA CORRECTIONAL FACILITY (AMF)

AutoCAD SHX Text

BARAGA, MI 49908

AutoCAD SHX Text

13924 WADAGA ROAD

AutoCAD SHX Text

SHOWER UPGRADES

AutoCAD SHX Text

472AMFMAINTPROJ

AutoCAD SHX Text A-104

AutoCAD SHX Text

UNIT 3 - FLOOR PLANS

AutoCAD SHX Text

BKO

AutoCAD SHX Text

DJS

AutoCAD SHX Text REINSTALL SALVAGED EXPANDED METAL MESH AND FRAME AT THE TOP OF DIVIDER PANEL (NOT SHOWN) AFTER THE INSTALLATION OF NEW HVAC GRILLE.

AutoCAD SHX Text

CLEAN AND SANITIZE EXISTING TO REMAIN STAINLESS STEEL DIVIDER.

AutoCAD SHX Text EXISTING CONCRETE CURB/THRESHOLD TO RECEIVE NEW EPOXY FLOORING FINISH (EP-1) OVER IT ON ALL THREE (3) SIDES. SEE DETAIL NO. 7 ON SHEET A-200.

AutoCAD SHX Text PROVIDE SECURITY SEALANT CAULK (C-1) WHERE SHOWER CABINET AND FLOOR MEET (TYPICAL THROUGHOUT).

AutoCAD SHX Text

FILL DEPRESSED FLOOR AREA WITH EPOXY GROUT AS A

AutoCAD SHX Text

RESULT OF REMOVING THE EXISTING THRESHOLD.

AutoCAD SHX Text PROVIDE NEW STAINLESS STEEL 34" X 34" X 85" SHOWER CABINETS WITH TOUCH CONTROLS, SHOWER HEAD, AND RECESSED SOAP DISH, BASIS OF DESIGN IS 'I-CON SYSTEMS, INC.' SHOWER CABINET TO BE CENTERED WITHIN EXISTING SHOWER STALL. SEE PLUMBING DRAWINGS.

AutoCAD SHX Text

GENERAL PHASING PLAN

AutoCAD SHX Text

1. CONTRACTOR TO BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY CONTRACTOR TO BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY TO BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY TO BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY BEGIN CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY CONSTRUCTION IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY IN HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY HOUSING UNIT 8 AS HOUSING UNIT IS CURRENTLY UNIT 8 AS HOUSING UNIT IS CURRENTLY UNIT 8 AS HOUSING UNIT IS CURRENTLY 8 AS HOUSING UNIT IS CURRENTLY 8 AS HOUSING UNIT IS CURRENTLY AS HOUSING UNIT IS CURRENTLY AS HOUSING UNIT IS CURRENTLY HOUSING UNIT IS CURRENTLY HOUSING UNIT IS CURRENTLY UNIT IS CURRENTLY UNIT IS CURRENTLY IS CURRENTLY IS CURRENTLY CURRENTLY CURRENTLY UNOCCUPIED. CONTRACTOR TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL CONTRACTOR TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL CONTRACTOR TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL CONTRACTOR TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL TO COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL COORDINATE WITH OWNER THAT HOUSING UNIT 8 IS STILL WITH OWNER THAT HOUSING UNIT 8 IS STILL WITH OWNER THAT HOUSING UNIT 8 IS STILL OWNER THAT HOUSING UNIT 8 IS STILL OWNER THAT HOUSING UNIT 8 IS STILL THAT HOUSING UNIT 8 IS STILL THAT HOUSING UNIT 8 IS STILL HOUSING UNIT 8 IS STILL HOUSING UNIT 8 IS STILL UNIT 8 IS STILL UNIT 8 IS STILL 8 IS STILL 8 IS STILL IS STILL IS STILL STILL STILL UNOCCUPIED AT THE START OF CONSTRUCTION. 1.1. IF HOUSING UNIT 8 IS UNOCCUPIED AT THE TIME OF CONSTRUCTION, THE CONTRACTOR IF HOUSING UNIT 8 IS UNOCCUPIED AT THE TIME OF CONSTRUCTION, THE CONTRACTOR CAN REPLACE ALL THE SHOWERS AT ONE TIME. 2. AFTER CONSTRUCTION IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE AFTER CONSTRUCTION IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE CONSTRUCTION IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE CONSTRUCTION IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE IN HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE HOUSING UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE UNIT 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE 8 IS COMPLETE, CONTRACTOR IS TO COORDINATE IS COMPLETE, CONTRACTOR IS TO COORDINATE IS COMPLETE, CONTRACTOR IS TO COORDINATE COMPLETE, CONTRACTOR IS TO COORDINATE COMPLETE, CONTRACTOR IS TO COORDINATE CONTRACTOR IS TO COORDINATE CONTRACTOR IS TO COORDINATE IS TO COORDINATE IS TO COORDINATE TO COORDINATE TO COORDINATE COORDINATE COORDINATE WITH OWNER TO START SHOWER REPLACEMENT IN HOUSING UNIT 3. 2.1. IF HOUSING UNIT 3 IS UNOCCUPIED AT THE TIME OF CONSTRUCTION, THE CONTRACTOR IF HOUSING UNIT 3 IS UNOCCUPIED AT THE TIME OF CONSTRUCTION, THE CONTRACTOR CAN REPLACE ALL THE SHOWERS AT ONE TIME. 3. AFTER CONSTRUCTION IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER AFTER CONSTRUCTION IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER CONSTRUCTION IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER CONSTRUCTION IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER IN HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER HOUSING UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER UNIT 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER 3 IS FULLY COMPLETED (LARA INSPECTIONS, OWNER IS FULLY COMPLETED (LARA INSPECTIONS, OWNER IS FULLY COMPLETED (LARA INSPECTIONS, OWNER FULLY COMPLETED (LARA INSPECTIONS, OWNER FULLY COMPLETED (LARA INSPECTIONS, OWNER COMPLETED (LARA INSPECTIONS, OWNER COMPLETED (LARA INSPECTIONS, OWNER (LARA INSPECTIONS, OWNER (LARA INSPECTIONS, OWNER INSPECTIONS, OWNER INSPECTIONS, OWNER OWNER OWNER INSPECTIONS, AND ALL PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE AND ALL PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE AND ALL PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE ALL PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE ALL PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE PUNCH LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE LIST ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE ITEMS COMPLETED), CONTRACTOR IS TO COORDINATE COMPLETED), CONTRACTOR IS TO COORDINATE COMPLETED), CONTRACTOR IS TO COORDINATE CONTRACTOR IS TO COORDINATE CONTRACTOR IS TO COORDINATE IS TO COORDINATE IS TO COORDINATE TO COORDINATE TO COORDINATE COORDINATE COORDINATE WITH OWNER TO START SHOWER REPLACEMENT IN HOUSING UNIT 2. 3.1. THE FACILITY WILL COORDINATE THE MOVEMENT OF ALL THE INMATES OUT OF HOUSING THE FACILITY WILL COORDINATE THE MOVEMENT OF ALL THE INMATES OUT OF HOUSING UNIT 2 TO MAKE IT FULLY UNOCCUPIED. THE MOVEMENT OF INMATES COULD TAKE UP TO 3 WEEKS TO COMPLETE. CONTRACTOR CAN NOT START WORK UNTIL INMATES ARE FULLY MOVED AND MDOC GIVES APPROVAL TO PROCEED WITH CONSTRUCTION. 3.2. ONCE HOUSING UNIT 2 IS UNOCCUPIED, THE CONTRACTOR CAN REPLACE ALL THE ONCE HOUSING UNIT 2 IS UNOCCUPIED, THE CONTRACTOR CAN REPLACE ALL THE SHOWERS AT ONE TIME IN THAT BUILDING.

AutoCAD SHX Text

GENERAL CONSTRUCTION LEGEND

AutoCAD SHX Text

EXISTING CONSTRUCTION TO REMAIN.

AutoCAD SHX Text

EXISTING CONSTRUCTION TO BE REMOVED.

AutoCAD SHX Text SHOWER SUPPLIER SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH SUPPLIER SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH SUPPLIER SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH HEIGHT, WIDTH, AND DEPTH FOR EACH HEIGHT, WIDTH, AND DEPTH FOR EACH WIDTH, AND DEPTH FOR EACH WIDTH, AND DEPTH FOR EACH AND DEPTH FOR EACH AND DEPTH FOR EACH DEPTH FOR EACH DEPTH FOR EACH FOR EACH FOR EACH EACH EACH SHOWER CABINET LOCATION PRIOR TO SUBMITTING SHOP DRAWINGS.

AutoCAD SHX Text VERIFY EXISTING FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR EXISTING FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR EXISTING FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR TO ENSURE THEY WILL ALIGN WITH THE FLOOR TO ENSURE THEY WILL ALIGN WITH THE FLOOR ENSURE THEY WILL ALIGN WITH THE FLOOR ENSURE THEY WILL ALIGN WITH THE FLOOR THEY WILL ALIGN WITH THE FLOOR THEY WILL ALIGN WITH THE FLOOR WILL ALIGN WITH THE FLOOR WILL ALIGN WITH THE FLOOR ALIGN WITH THE FLOOR ALIGN WITH THE FLOOR WITH THE FLOOR WITH THE FLOOR THE FLOOR THE FLOOR FLOOR FLOOR DRAINS IN THE NEW SHOWER PANS.

AutoCAD SHX Text VERIFY THE LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THE LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THE LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THAT WILL EXIT STRAIGHT OUT THE BACK OF THAT WILL EXIT STRAIGHT OUT THE BACK OF WILL EXIT STRAIGHT OUT THE BACK OF WILL EXIT STRAIGHT OUT THE BACK OF EXIT STRAIGHT OUT THE BACK OF EXIT STRAIGHT OUT THE BACK OF STRAIGHT OUT THE BACK OF STRAIGHT OUT THE BACK OF OUT THE BACK OF OUT THE BACK OF THE BACK OF THE BACK OF BACK OF BACK OF OF OF THE CABINET THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY CABINET THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY CABINET THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY BLOCK WALL AND WILL NOT COLLIDE WITH ANY BLOCK WALL AND WILL NOT COLLIDE WITH ANY WALL AND WILL NOT COLLIDE WITH ANY WALL AND WILL NOT COLLIDE WITH ANY AND WILL NOT COLLIDE WITH ANY AND WILL NOT COLLIDE WITH ANY WILL NOT COLLIDE WITH ANY WILL NOT COLLIDE WITH ANY NOT COLLIDE WITH ANY NOT COLLIDE WITH ANY COLLIDE WITH ANY COLLIDE WITH ANY WITH ANY WITH ANY ANY ANY EXISTING PIPES OR CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM PIPES OR CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM PIPES OR CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM OR CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM OR CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM CONDUIT. LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM OF THE EXHAUST PERFORATIONS MAY VARY FROM OF THE EXHAUST PERFORATIONS MAY VARY FROM THE EXHAUST PERFORATIONS MAY VARY FROM THE EXHAUST PERFORATIONS MAY VARY FROM EXHAUST PERFORATIONS MAY VARY FROM EXHAUST PERFORATIONS MAY VARY FROM PERFORATIONS MAY VARY FROM PERFORATIONS MAY VARY FROM MAY VARY FROM MAY VARY FROM VARY FROM VARY FROM FROM FROM SHOWER CABINET TO SHOWER CABINET.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text 10/19/2023 PHASE 500 50% 11/23/2023 PHASE 500 90% 12/29/2023 PHASE 500 95% 1/5/2024 PHASE 500 95% 2/7/2024 PHASE 500 95% 2/23/2024 PHASE 500 100% 3/6/2024 PLAN REVIEW 4/25/2024 CD SET 2/21/2025 PHASE 500 100% 3/28/2025 PLAN REVIEW SET 4/10/2025 BID SET 4/15/2025 ADDENDUM NO. 1

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

A R

C H

C T

M a t r ix D

O F

H N

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

AutoCAD SHX Text

SLOPE TO DRAIN

AutoCAD SHX Text

SLOPE TO DRAIN

AutoCAD SHX Text

LOW POINT AT NEW DRAIN

AutoCAD SHX Text

HIGH POINT AT SHOWER CABINET

AutoCAD SHX Text

NEW STAINLESS STEEL SHOWER CABINET

AutoCAD SHX Text

EXISTING CONCRETE FLOOR

AutoCAD SHX Text

SLOPED FLOOR AND SIDE OF CURB TOWARDS SHOWERS TO BE NEW EPOXY (EP-1)

AutoCAD SHX Text

CAULK JOINT BETWEEN NEW SLOPED FLOOR AND SHOWER CABINETS (TYP.)

AutoCAD SHX Text

NEW FLOOR DRAIN

AutoCAD SHX Text A-104

AutoCAD SHX Text

UNIT 3, WING B & D SHOWER

AutoCAD SHX Text 3/8" = 1'-0"

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

LINE OF SHOWER THRESHOLD

AutoCAD SHX Text

LINE OF SHOWER FLOOR

AutoCAD SHX Text

FACILITY TO SUPPLY CEILING MOUNTED SHOWER CURTAIN BREAKAWAY TRACKS

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER WALL TILES AND GAPS. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

EXISTING METAL DIVIDER FRAME TO REMAIN

AutoCAD SHX Text

EXISTING TO REMAIN STAINLESS STEEL METAL PANELS ON DIVIDER PANEL.

AutoCAD SHX Text

NEW STAINLESS STEEL 34" X 34" X 84" SHOWER CABINETS

AutoCAD SHX Text

LINE OF EXISTING WALL BEYOND

AutoCAD SHX Text

AutoCAD SHX Text A-105,106

AutoCAD SHX Text

LINE OF SHOWER THRESHOLD

AutoCAD SHX Text

LINE OF CHANGING AREA FLOOR WITH NEW EPOXY

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER WALL TILES AND GAPS. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

NEW STAINLESS STEEL 34" X 34" X 85" SHOWER CABINETS

AutoCAD SHX Text

DASHED LINE REPRESENTS EXISTING MASONRY BLOCK UNIT WALL BEYOND

AutoCAD SHX Text

UNIT 8 TYPICAL SHOWER

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

AutoCAD SHX Text A-104

AutoCAD SHX Text 3/4" = 1'-0"

AutoCAD SHX Text

CURB SECTION / SHOWER SECTION / CEILING SOFFIT SECTION

AutoCAD SHX Text A-105,106, AutoCAD SHX Text 3/8" = 1'-0"

AutoCAD SHX Text

AutoCAD SHX Text A-200

AutoCAD SHX Text

TOP OF MASONRY BLOCK UNIT WALL/TOP OF NEW S.S. FRONT PANEL

AutoCAD SHX Text 7'-4"+/-

AutoCAD SHX Text

EXISTING TO REMAIN GYPSUM BOARD CEILING

AutoCAD SHX Text 9'-5"+/-

AutoCAD SHX Text NEW 3-5/8" METAL STUDS WITH 5/8" GYPSUM BOARD. PAINT TO MATCH EXISTING WALL FINISH

AutoCAD SHX Text

NEW FIRE RETARDANT TREATED WOOD BLOCKING

AutoCAD SHX Text

NEW SHOWER SOFFIT WITH SCHEDULED PAINT FINISH

AutoCAD SHX Text 23329.00

AutoCAD SHX Text

472/23025.TAP

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text contract order no.

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR E. CHAVEZ AVE

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

AutoCAD SHX Text 23329.00

AutoCAD SHX Text funding code

AutoCAD SHX Text sheet description

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

BARAGA CORRECTIONAL FACILITY (AMF)

AutoCAD SHX Text

BARAGA, MI 49908

AutoCAD SHX Text

13924 WADAGA ROAD

AutoCAD SHX Text

SHOWER UPGRADES

AutoCAD SHX Text

472AMFMAINTPROJ

AutoCAD SHX Text A-200

AutoCAD SHX Text

UNITS 3 & 8 ELEVATIONS/ PLAN/DETAILS

AutoCAD SHX Text

BKO

AutoCAD SHX Text

DJS

AutoCAD SHX Text

TYPICAL UNIT 8 COVE BASE

AutoCAD SHX Text 3" = 1'-0"

AutoCAD SHX Text

EXISTING MASONRY WALL

AutoCAD SHX Text

EXISTING WALL TILE

AutoCAD SHX Text

NEW EPOXY (EP-1) FLOOR & WALL BASE

AutoCAD SHX Text NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER WALL TILES. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

FINISH FLOOR

AutoCAD SHX Text

NEW STAINLESS STEEL DRIVE PINS AT 12" O.C.

AutoCAD SHX Text

EASE EDGE OF STAINLESS STEEL PANEL

AutoCAD SHX Text

SLOPE TO DRAIN

AutoCAD SHX Text

DETAIL

AutoCAD SHX Text A-102,103, AutoCAD SHX Text

TYPICAL UNIT 3 COVE

AutoCAD SHX Text 3" = 1'-0"

AutoCAD SHX Text

EXISTING MASONRY WALL

AutoCAD SHX Text

NEW EPOXY (EP-1) FLOOR AND WALL BASE

AutoCAD SHX Text NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER EPOXY BASE. STEEL PANEL TO BOW BACKWARDS TO MASONRY WALL AS REQUIRED. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

FINISH FLOOR

AutoCAD SHX Text

NEW STAINLESS STEEL DRIVE PINS AT 12" O.C.

AutoCAD SHX Text

EASE EDGE OF STAINLESS STEEL PANEL

AutoCAD SHX Text

SLOPE TO DRAIN

AutoCAD SHX Text

BASE DETAIL

AutoCAD SHX Text

FACILITY TO SUPPLY CEILING MOUNTED SHOWER CURTAIN BREAKAWAY TRACKS

AutoCAD SHX Text

AutoCAD SHX Text A-107

AutoCAD SHX Text DASHED LINE REPRESNTS NEW NEW EPOXY FLOORING (EP-1) FINISH OVER EXISTING TO REMAIN CONCRETE THRESHOLD. PROVIDE NEW EPOXY GROUT SKIN OVER THRESHOLD AS REQUIRED FOR NEW FINISH

AutoCAD SHX Text

C.M.U. WALL BEYOND

AutoCAD SHX Text

EXISTING TO REMAIN SHOWER ENTRY DOOR

AutoCAD SHX Text

THRESHOLD SECTION

AutoCAD SHX Text 6" = 1'-0"

AutoCAD SHX Text

NEW EPOXY FLOORING (EP-1)

AutoCAD SHX Text

SLOPE TO DRAIN

AutoCAD SHX Text

FINISH FLOOR

AutoCAD SHX Text EXISTING TO REMAIN METAL DIVIDER FRAME WITH WELDED EXPANDED METAL MESH TO MATCH EXISTING ADJACENT DIVIDER FRAME

AutoCAD SHX Text

AutoCAD SHX Text A-104

AutoCAD SHX Text

AutoCAD SHX Text A-107

AutoCAD SHX Text

MIDSPAN SUPPORT DETAIL

AutoCAD SHX Text 1 1/2" = 1'-0"

AutoCAD SHX Text

6" PRECAST CONC. PANEL

AutoCAD SHX Text

'ARMSTRONG' SECURELOCK MIDSPAN

AutoCAD SHX Text

#12-24 X 7/8" TEK SCREW

AutoCAD SHX Text

1 1/2" X 1 1/2" X 1/8" L-ANGLE SECURED TO CEILING STRUCTURE EVERY 48" O.C. MAX.

AutoCAD SHX Text

2" X 2" X 1/8" GALVANIZED ANGLE FASTENED TO HOLLOW CORE PLANK

AutoCAD SHX Text NEW EXPANSION ANCHOR, ANCHOR TO PLANK ONLY. LOCATE ANCHORS IN OPEN CORES. DO NOT DRILL THROUGH STRAND IN WEB

AutoCAD SHX Text 7'-6" +/- A.F.F.

AutoCAD SHX Text

CEILING HEIGHT VARIES

AutoCAD SHX Text 8'-6 1/2" - 8'-8 1/2"+/- A.F.F.

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

AutoCAD SHX Text A-105,106

AutoCAD SHX Text A-104

AutoCAD SHX Text

UNIT 3, WING A & C SHOWER

AutoCAD SHX Text 3/8" = 1'-0"

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

LINE OF SHOWER THRESHOLD

AutoCAD SHX Text

LINE OF SHOWER FLOOR

AutoCAD SHX Text

FACILITY TO SUPPLY CEILING MOUNTED SHOWER CURTAIN BREAKAWAY TRACKS

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER WALL TILES AND GAPS. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

EXISTING METAL DIVIDER FRAME TO REMAIN

AutoCAD SHX Text

EXISTING TO REMAIN STAINLESS STEEL METAL PANELS ON DIVIDER PANEL.

AutoCAD SHX Text

NEW STAINLESS STEEL 34" X 34" X 85" SHOWER CABINETS

AutoCAD SHX Text

LINE OF EXISTING WALL BEYOND

AutoCAD SHX Text

TYPICAL SHOWER SECTION

AutoCAD SHX Text 3/4" = 1'-0"

AutoCAD SHX Text

EXISTING CMU BLOCK WALL

AutoCAD SHX Text

SECURITY SURROUND WALL

AutoCAD SHX Text

NEW STAINLESS STEEL SHOWER CABINET

AutoCAD SHX Text NEW STAINLESS STEEL METAL PANEL TO CONCEAL GAP BETWEEN SHOWER CABINET AND WALL/CEILING

AutoCAD SHX Text NEW 14 GAUGE STAINLESS STEEL PANELS OVER WALL. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text A.F.F.

AutoCAD SHX Text 7'-6"%%128

NEW SCHEDULED 'ARMSTRONG' METALWORKS SECURELOCK PLUS (16 GAUGE) CEILING SYSTEM 12", 18" AND 24" PLANKS WITH 14 GAUGE SECURELOCK PLUS WALL MOLDING.

KEY PLAN

SCALE: NTS

wing A wing C wing B wing D

PLAN

NORTH

LOWER LEVEL

UPPER LEVEL

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

A R

C H

C T

M a t r ix D

O F

H N

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 2 - WING B

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 2 - WING A

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 2 - WING D

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

UNIT 2 - WING C

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

AutoCAD SHX Text FILL DEPRESSED FLOOR AREA WITH EPOXY GROUT AS A RESULT OF REMOVING EXISTING THRESHOLD.

AutoCAD SHX Text

AutoCAD SHX Text PROVIDE NEW FRONT MOUNTED SECURITY FRAME MIRROR SA05 BY 'BRADLEY' OR EQUAL ON WALL IN CHANGING AREA. CENTER OF MIRROR AT 60" A.F.F.

AutoCAD SHX Text

%%UCONSTRUCTION NOTES

AutoCAD SHX Text

1 (SIM.)

AutoCAD SHX Text

ALT-A-A200

AutoCAD SHX Text

ALT-A-200

AutoCAD SHX Text

2 (SIM.)

AutoCAD SHX Text

ALT-A-200

AutoCAD SHX Text

ALT-A-200

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW EPOXY FLOORING (EP-1) AND 6" UP WALL. SEE DETAIL NO. 3 ON SHEET ALT-A-200. INSTALL PER MANUFACTURER'S INSTALLATION INSTRUCTIONS. SLOPE NEW EPOXY TO FLOOR DRAINS AS REQUIRED.

AutoCAD SHX Text PROVIDE NEW STAINLESS STEEL 34" X 34" X 85" SHOWER SHOWER SHOWER CABINETS WITH TOUCH CONTROLS, SHOWER HEAD, AND RECESSED SOAP DISH, BASIS OF DESIGN IS 'I-CON SYSTEMS, INC.' SHOWER CABINET TO BE CENTERED WITHIN EXISTING SHOWER STALL. SEE PLUMBING DRAWINGS.

AutoCAD SHX Text FILL DEPRESSED FLOOR AREA WITH EPOXY GROUT AS A RESULT OF REMOVING THE EXISTING THRESHOLD.

AutoCAD SHX Text

AutoCAD SHX Text 23329.00

AutoCAD SHX Text

472/23025.TAP

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text contract order no.

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR E. CHAVEZ AVE

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

AutoCAD SHX Text 23329.00

AutoCAD SHX Text funding code

AutoCAD SHX Text sheet description

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

BARAGA CORRECTIONAL FACILITY (AMF)

AutoCAD SHX Text

BARAGA, MI 49908

AutoCAD SHX Text

13924 WADAGA ROAD

AutoCAD SHX Text

SHOWER UPGRADES

AutoCAD SHX Text

472AMFMAINTPROJ

AutoCAD SHX Text

UNIT 2 - FLOOR PLANS

AutoCAD SHX Text

BKO

AutoCAD SHX Text

DJS

AutoCAD SHX Text REINSTALL SALVAGED EXPANDED METAL MESH AND FRAME AT THE TOP OF DIVIDER PANEL (NOT SHOWN) AFTER THE INSTALLATION OF NEW HVAC GRILLE.

AutoCAD SHX Text

CLEAN AND SANITIZE EXISTING TO REMAIN STAINLESS STEEL DIVIDER.

AutoCAD SHX Text EXISTING CONCRETE CURB/THRESHOLD TO RECEIVE NEW EPOXY FLOORING FINISH (EP-1) OVER IT ON ALL THREE (3) SIDES. SEE DETAIL NO. 5 ON SHEET ALT-A-200.

AutoCAD SHX Text PROVIDE SECURITY SEALANT CAULK (C-1) WHERE SHOWER CABINET AND FLOOR MEET (TYPICAL THROUGHOUT).

AutoCAD SHX Text

ALT-A-102

AutoCAD SHX Text

GENERAL PHASING PLAN

AutoCAD SHX Text

GENERAL CONSTRUCTION LEGEND

AutoCAD SHX Text

EXISTING CONSTRUCTION TO REMAIN.

AutoCAD SHX Text

EXISTING CONSTRUCTION TO BE REMOVED.

AutoCAD SHX Text

GENERAL NOTES

10/19/2023 PHASE 500 50% 11/23/2023 PHASE 500 90% 12/29/2023 PHASE 500 95% 1/5/2024 PHASE 500 95% 2/7/2024 PHASE 500 95% 2/23/2024 PHASE 500 100% 3/6/2024 PLAN REVIEW 4/25/2024 CD SET 2/21/2025 PHASE 500 100% 3/28/2025 PLAN REVIEW SET 4/10/2025 BID SET 4/15/2025 ADDENDUM NO. 1

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

A R

C H

C T

M a t r ix D

O F

H N

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

AutoCAD SHX Text

ALT-A-102

AutoCAD SHX Text

UNIT 2, WING B AND D SHOWER

AutoCAD SHX Text 3/8" = 1'-0"

AutoCAD SHX Text

CABINET ELEVATION

AutoCAD SHX Text

LINE OF SHOWER THRESHOLD

AutoCAD SHX Text

LINE OF SHOWER FLOOR

AutoCAD SHX Text

FACILITY TO SUPPLY CEILING MOUNTED SHOWER CURTAIN BREAKAWAY TRACKS

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE NEW 14 GAUGE 304 STAINLESS STEEL PANELS OVER WALL TILES AND GAPS. FINISH TO MATCH INSIDE OF SHOWER CABINETS

AutoCAD SHX Text

EXISTING METAL DIVIDER FRAME TO REMAIN

AutoCAD SHX Text

EXISTING TO REMAIN STAINLESS STEEL METAL PANELS ON DIVIDER PANEL.

AutoCAD SHX Text

NEW STAINLESS STEEL 34" X 34" X 84" SHOWER CABINETS

AutoCAD SHX Text

LINE OF EXISTING WALL BEYOND

AutoCAD SHX Text

ALT-A-102

AutoCAD SHX Text 23329.00

AutoCAD SHX Text

472/23025.TAP

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text contract order no.

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR E. CHAVEZ AVE

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

AutoCAD SHX Text 23329.00

AutoCAD SHX Text funding code

AutoCAD SHX Text sheet description

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

BARAGA CORRECTIONAL FACILITY (AMF)

AutoCAD SHX Text

BARAGA, MI 49908

AutoCAD SHX Text

13924 WADAGA ROAD,

AutoCAD SHX Text

SHOWER UPGRADES

AutoCAD SHX Text

472AMFMAINTPROJ

AutoCAD SHX Text

ALT-A-200

AutoCAD SHX Text

UNIT 2 ELEVATION/ PLAN/DETAILS

AutoCAD SHX Text

BKO

AutoCAD SHX Text

DJS

AutoCAD SHX Text

TYPIC…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Mar 12, 2026.