472-19320.JBB_Alger Correctional Showers Bid Drawings 3-21-25 PT1.pdf

PDF 8 MB Posted Apr 15, 2025

Attached to: 472/19320. JBB; Alger C. F. - Shower Renovations
Solicitation number: RFQ 171 250000000316 3
Issued by: Alger County, Michigan

About this file

Written by GovTribe AI · Mar 13, 2026

Bid Document Summary: Alger Correctional Facility Shower Renovations

This is a comprehensive bid set for the Michigan Department of Corrections (MDOC) and the State of Michigan Department of Technology, Management and Budget for shower renovation work at Alger Correctional Facility located in Munising, Michigan. The project involves complete renovation of shower facilities across four housing units—Birch, Spruce, Maple (Alt 1), and Pine (Alt 1)—with the base bid covering work in Birch and Spruce housing units only. Work includes demolition of existing shower infrastructure, installation of new stainless steel shower cabinets (34"x34"x85" standard and 36"x36"x85" ADA barrier-free models), new metal ceiling systems with Armstrong Securelock Plus or stainless steel panels, porcelain floor tile, wall panels, plumbing and electrical systems, and HVAC modifications. The anticipated construction schedule spans 18 months for the base bid, with an additional alternate (Add Alternate #1) covering Maple and Pine housing units extending to Month 18. Critical project constraints include phased work to maintain operational shower access—only one shower set per housing unit may be shut down at any time except in the unoccupied Birch unit—with owner-provided escorts and inspections required before moving to subsequent shower sets. The owner will provide a maximum of two escorts anticipating simultaneous work in two housing units. Drawings are dated March 21, 2025 (Bid Set) with plan review dated March 14, 2025.

The project specifications indicate construction must comply with the Michigan Rehabilitation Code for Existing Buildings (MRCEB) 2015 for Level 2 alterations in a building classified as Use Group I-3 (institutional residential) with Type 2B construction and full fire suppression. All electrical work requires security hardware including Torx T-25 fasteners with center rejection pins, hex head concrete screws without slots, and expansion anchors without explosive driving requirements. Conduit strapping must follow specific security requirements based on height (12 inches for conduit under 10 feet, 5 feet for conduit above 10 feet), and all electrical outages are limited to 2-hour windows with portable generators required for extended disruptions. Pricing information and contract award details are not included in the provided documentation. The project is located at N6141 Industrial Park Drive, Munising, Michigan 49862, with design coordination through DS Architects Engineers and Matrix Consulting Engineers, Inc. of Lansing, Michigan.

View the file

Other files

File	Type	Posted
472-19320_Alger Showers Project Manual 3-21-25.pdf	PDF	Apr 15, 2025
472-19320.JBB_ Alger Showers Addendum #2.pdf	PDF	Apr 15, 2025
LEIN Request 19320.pdf	PDF	Apr 15, 2025
472-19320.JBB_ Alger Showers Advertisement.pdf	PDF	Apr 15, 2025
472-19320.JBB_Alger Correctional Showers Bid Drawings 3-21-25 PT2.pdf	PDF	Apr 15, 2025
472-19320.JBB_ Alger Showers Addendum #1.pdf	PDF	Apr 15, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

N G

B Y

D R

B Y

Y C

R S

T O

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , N

C A

R B

, D

D M

N D

N A

N D

C O

R U

O N

T D

G -0

C T

N O

R ev ie w

O W

O N

C O

R R

O N

MICHIGAN DEPARTMENT OF CORRECTIONS

ALGER CORRECTIONAL FACILITY (LMF) -

SHOWER RENOVATIONS

472/19320.JBB

TITLESHEET

NO.

COVER SHEETG-001

A-101 BUILDING SPRUCE - DEMOLITION PLAN

A-102 BUILDING BIRCH, MAPLE (ALT 1), PINE (ALT 1) - DEMOLITION PLAN

A-103 BUILDING SPRUCE - FLOOR PLAN

A-104 BUILDING BIRCH, MAPLE (ALT 1), PINE (ALT 1) - FLOOR PLAN

Base Bid

BASE BID: WORK TO BE COMPLETED IN HOUSING UNIT BIRCH AND SPRUCE.

A-105 BUILDING PINE - WING A (ALT 1) - DEMOLITION PLAN, FLOOR PLAN,AND DETAILS

HOUSING UNITS BIRCH, MAPLE AND PINE ALL SHARE SIMILAR FOOTPRINTS BESIDES PINE - WING

A. SEE SHEET A-105 FOR PINE - WING A DEMOLITION AND FLOOR PLAN.

FOR ALL HOUSING UNITS ON THIS PROJECT ONLY ONE SET/PAIR OF SHOWERS CAN BE SHUT

DOWN AND WORKED ON AT ANY ONE TIME PER HOUSING UNIT, EXCEPT FOR BIRCH. THE

REMAINING THREE SETS/PAIRS OF SHOWERS ARE TO BE FULLY OPERATIONAL. THE REPLACED

SHOWERS MUST BE FULLY INSPECTED, APPROVED, AND MADE OPERABLE, BEFORE THE

CONTRACTOR CAN MOVE TO THE NEXT SET/PAIR OF SHOWERS TO BEGIN WORK.

TITLESHEET

NO.

A-200 DETAILS, SECTIONS, ELEVATIONS

E-100

E-300 ELECTRICAL FLOOR PLAN DEMOLITION

E-301 ELECTRICAL FLOOR PLAN DEMOLITION

E-400 ELECTRICAL FLOOR PLAN NEW LIGHTING

E-401 ELECTRICAL FLOOR PLAN NEW LIGHTING

M-100 MECHANICAL SYMBOLS ABBREVIATIONS + NOTES

M-300 FLOOR PLAN - BUILDING SPRUCE - HVAC DEMOLITION

M-301 FLOOR PLAN - BUILDINGS BIRCH, MAPLE (ALT 1), PINE (ALT 1) - HVAC DEMOLITION

M-400 FLOOR PLAN - BUILDING SPRUCE - HVAC NEW

M-401 FLOOR PLAN - BUILDINGS BIRCH, MAPLE (ALT 1), PINE (ALT 1) - HVAC NEW

P-100 PLUMBING SYMBOLS ABBREVIATIONS + NOTES

P-300 FLOOR PLAN - BUILDING SPRUCE - PLUMBING DEMOLITION

P-301 FLOOR PLAN - BUILDINGS BIRCH, MAPLE (ALT 1), PINE (ALT 1) - PLUMBING DEMOLITION

P-400 FLOOR PLAN - BUILDING SPRUCE - PLUMBING NEW

P-401 FLOOR PLAN - BUILDINGS BIRCH, MAPLE (ALT 1), PINE (ALT 1) - PLUMBING NEW

ELECTRICAL SYMBOLS, ABBREV. + NOTES

E-500 ELECTRICAL FLOOR PLAN NEW POWER

E-501 ELECTRICAL FLOOR PLAN NEW POWER

E-502 HOUSING UNIT ELECTRICAL ROOMS

A-201 PINE - WING A (ALT 1) - DETAILS, SECTIONS, ELEVATIONS

A-106 BUILDING SPRUCE - REFLECTED CEILING PLAN

A-107 BUILDING BIRCH, MAPLE (ALT 1), PINE (ALT 1) - REFLECTED CEILING PLAN

A-108 BUILDING PINE - WING A (ALT 1) - REFLECTED CEILING PLAN

A-202 FINISH LEGEND AND PINE - WING A (ALT 1) - DETAILS, SECTIONS, ELEVATIONS

6" MASONRY BLOCK UNIT WALL PARTITION CONSTRUCTION FROM FLOOR TO

UNDERSIDE OF HOLLOW CORE PLANK ABOVE (1ST FLR.: 8'-8" +/- A.F.F., 2ND

FLR.: 8'-8 1/2" +/-A.F.F.)

E-503 HOUSING UNIT ELECTRICAL ROOMS

CONTRACTOR TO BEGIN CONSTRUCTION IN HOUSING UNIT BIRCH AS THE HOUSING UNIT IS

CURRENTLY UNOCCUPIED.

HOUSING UNIT BIRCH IS UNOCCUPIED AT THE TIME OF CONSTRUCTION, THE

CONTRACTOR WILL HAVE ACCESS AND THE ABILITY TO REPLACE ALL THE SHOWERS

AT ONE TIME.

THE OWNER WILL PROVIDE A MAXIMUM OF 2 ESCORTS WITH THE ANTICIPATION THAT WORK IN

TWO DIFFERENT HOUSING UNITS WILL BE HAPPENING SIMULTANEOUSLY.

FIRE SUPPRESSION DRAWINGS AND SUBMITTALS.

D-100 STRUCTURAL - DEMO

D-200 STRUCTURAL - NEW

EXISTING CONSTRUCTION TO BE REMOVED.

EXISTING CONSTRUCTION TO REMAIN.

ANTICIPATED CONSTRUCTION SCHEDULES / CODE INFORMATIONG-002

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

R S

M A

T R

I X

Deduct Alternates

DEDUCT ALTERNATE #1: PROVIDE AN ALTERNATE PRICE FOR 'ARMSTRONG'

METALWORKS SECURELOCK PLUS (16 GAUGE) SCREW IN, SMOOTH TEXTURE

CEILING SYSTEM NON PERFORATED (P1) 12", 18" AND 24" WHITE POWDER

COATED PLANKS WITH 14 GAUGE SECURELOCK PLUS WALL MOLDING AND

MID SPANS INSTEAD OF STAINLESS STEEL PLANKS.

Add Alternates ADD ALTERNATE #1: AFTER BASE BID WORK IS COMPLETE, WORK IN HOUSING UNIT MAPLE AND PINE

TO BE COMPLETED.

W S

D S

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

%%UDRAWING INDEX

AutoCAD SHX Text

%%ULOCATION MAP

AutoCAD SHX Text

SITE

AutoCAD SHX Text

ALGER CORRECTIONAL FACILITY

AutoCAD SHX Text

SITE:

AutoCAD SHX Text

%%ULOCATION MAP

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

MUNISING, MI 49862

AutoCAD SHX Text

N6141 INDUSTRIAL PARK DR.

AutoCAD SHX Text

%%UFACILITY MAP

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

INDUSTRIAL PARK DR.

AutoCAD SHX Text

RAILROAD TRACKS

AutoCAD SHX Text

SITE

AutoCAD SHX Text

ALGER CORRECTIONAL FACILITY

AutoCAD SHX Text

%%UFACILITY MAP

AutoCAD SHX Text

%%UDRAWING INDEX

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

GENERAL CONSTRUCTION LEGEND

AutoCAD SHX Text

DEFERRED SUBMITTALS

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: (517) 487-2544

AutoCAD SHX Text

PHONE: (517) 487-2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR CHAVEZ AVE.

AutoCAD SHX Text administrator@matrixceinc.com

N G

B Y

D R

B Y

C O

R U

O N

/ C O

D E

R M

T O

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , N

C A

R B

, D

D M

N D

N A

N D

C O

R U

O N

T D

G -0

C T

N O

N S

O R

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

R S

M A

T R

I X

KEY PLAN

SCALE: NTS

wing 'A' wing 'C'

LOWER LEVEL

PLAN

NORTH

wing 'B' wing 'D'

UPPER LEVEL

HOUSING UNITS BIRCH, MAPLE AND PINE ALL SHARE SIMILAR FOOTPRINTS BESIDES PINE - WING A. SEE SHEET

A-105 FOR PINE - WING A DEMOLITION AND FLOOR PLAN.

ALGER CORRECTIONAL FACILITY - SHOWER RENOVATION

FILE NO. 472/19320.JBB

HOUSING UNIT AND SHOWER WINGS MONTH #1 MONTH #2 MONTH #3 MONTH #4 MONTH #5 MONTH #6 MONTH #7 MONTH #8 MONTH #9

BIRCH HOUSING UNIT

WING A

WING B

WING C

WING D

SPRUCE HOUSING UNIT

WING A

WING B

WING C - ADA

WING D

MAPLE HOUSING UNIT (ALTERNATE)

WING A

WING B

WING C

WING D

PINE HOUSING UNIT (ALTERNATE)

WING A - ADA

WING B

WING C

WING D

ESCORT TEAM 'B' = 1 ESCORT

BASE BID ANTICPATED CONSTRUCTION SCHEDULE

BASE BID (YEAR 1)

ESCORT TEAM 'A' = 1 ESCORT

ALGER CORRECTIONAL FACILITY - SHOWER RENOVATION

FILE NO. 472/19320.JBB

HOUSING UNIT AND SHOWER WINGS MONTH #10 MONTH #11 MONTH #12 MONTH #13 MONTH #14 MONTH #15 MONTH #16 MONTH #17 MONTH #18

BIRCH HOUSING UNIT (BASE BID)

WING A

WING B

WING C

WING D

SPRUCE HOUSING UNIT (BASE BID)

WING A

WING B

WING C - ADA

WING D

MAPLE HOUSING UNIT

WING A

WING B

WING C

WING D

PINE HOUSING UNIT

WING A - ADA

WING B

WING C

WING D

ADD ALTERNATE #1 ANTICPATED CONSTRUCTION SCHEDULE

ESCORT TEAM 'A' = 1 ESCORT

ESCORT TEAM 'B' = 1 ESCORT

ALTERNATE (YEAR 2)

R ev ie w

W S

D S

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: (517) 487-2544

AutoCAD SHX Text

PHONE: (517) 487-2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR CHAVEZ AVE.

AutoCAD SHX Text administrator@matrixceinc.com

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

BUILDING CONSTRUCTION TYPE: 2B

AutoCAD SHX Text

FIRE SUPPRESSION: FULLY SPRINKLED

AutoCAD SHX Text

BUILDING USE GROUP: I-3

AutoCAD SHX Text

CODE INFORMATION

AutoCAD SHX Text

BUILDING CODE: MRCEB (MICHIGAN REHABILITATION

AutoCAD SHX Text

CODE FOR EXISTING BUILDINGS 2015) - ALTERATIONS

LEVEL 2

N G

B Y

D R

B Y

U C

N P

T O

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , N

C A

R B

, D

D M

N D

N A

N D

C O

R U

O N

T D

A-

C T

N O

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

R S

N S

O R

KEY PLAN

SCALE: NTS

wing 'A' wing 'C'

LOWER LEVEL

PLAN

NORTH

wing 'B' wing 'D'

UPPER LEVEL

M A

T R

I X

HOUSING UNITS BIRCH, MAPLE AND PINE ALL SHARE SIMILAR FOOTPRINTS BESIDES PINE - WING A. SEE SHEET

A-105 FOR PINE - WING A DEMOLITION AND FLOOR PLAN.

R ev ie w

W S

D S

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING B

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING A

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING D

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING C

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text

AutoCAD SHX Text SHADED AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND EXISTING 1" X 1" MOSAIC FLOOR TILE AND EXISTING 1" X 1" MOSAIC FLOOR TILE AND 1" X 1" MOSAIC FLOOR TILE AND 1" X 1" MOSAIC FLOOR TILE AND X 1" MOSAIC FLOOR TILE AND X 1" MOSAIC FLOOR TILE AND 1" MOSAIC FLOOR TILE AND 1" MOSAIC FLOOR TILE AND MOSAIC FLOOR TILE AND MOSAIC FLOOR TILE AND FLOOR TILE AND FLOOR TILE AND TILE AND TILE AND AND AND ASSOCIATED TILE BASE IN CHANGING AREA. PREPARE FLOOR FOR SCHEDULED NEW FLOOR TILE.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND DISPOSE OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO AND DISPOSE OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO AND DISPOSE OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO DISPOSE OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO DISPOSE OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO OF EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO EXISTING SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO GRIND FLOOR SMOOTH AS REQUIRED DUE TO GRIND FLOOR SMOOTH AS REQUIRED DUE TO FLOOR SMOOTH AS REQUIRED DUE TO FLOOR SMOOTH AS REQUIRED DUE TO SMOOTH AS REQUIRED DUE TO SMOOTH AS REQUIRED DUE TO AS REQUIRED DUE TO AS REQUIRED DUE TO REQUIRED DUE TO REQUIRED DUE TO DUE TO DUE TO TO TO DEMOLITION OF THRESHOLD.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING GRAB BARS.

AutoCAD SHX Text

REMOVE AND SALVAGE EXISTING GATE DOOR, DOOR HARDWARE, AND SECURITY SURROUND.

AutoCAD SHX Text

EXISTING FLOOR DRAIN. SEE PLUMBING DRAWINGS.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING SHOWER HEAD AND CONTROLS.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING TOWEL HOOKS. TYPICAL THROUGHOUT.

AutoCAD SHX Text

FLOOR TILE IN SHOWER STALL TO REMAIN.

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

REMOVE AND SALVAGE EXISTING PHONE AND SCREEN FOR THE CONSTRUCTION OF NEW WALL.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING ACRYLIC PARTITION AND BRACKETS.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING PLYWOOD SHEATHING.

AutoCAD SHX Text

EXISTING SURFACE MOUNTED PHONE TO REMAIN.

AutoCAD SHX Text

AutoCAD SHX Text PROVIDE MASONRY OPENING IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND MASONRY OPENING IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND MASONRY OPENING IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND OPENING IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND OPENING IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND IN EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND EXISTING BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND BLOCK WALL AS REQUIRED FOR NEW TOUCH SENSOR AND WALL AS REQUIRED FOR NEW TOUCH SENSOR AND WALL AS REQUIRED FOR NEW TOUCH SENSOR AND AS REQUIRED FOR NEW TOUCH SENSOR AND AS REQUIRED FOR NEW TOUCH SENSOR AND REQUIRED FOR NEW TOUCH SENSOR AND REQUIRED FOR NEW TOUCH SENSOR AND FOR NEW TOUCH SENSOR AND FOR NEW TOUCH SENSOR AND NEW TOUCH SENSOR AND NEW TOUCH SENSOR AND TOUCH SENSOR AND TOUCH SENSOR AND SENSOR AND SENSOR AND AND AND SHOWER HEADS.

AutoCAD SHX Text

EXISTING SECURITY SURROUND TO BE REMOVED AND SALVAGED.

AutoCAD SHX Text

AutoCAD SHX Text TYPICAL TEMPORARY CONSTRUCTION AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE TEMPORARY CONSTRUCTION AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE TEMPORARY CONSTRUCTION AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE CONSTRUCTION AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE CONSTRUCTION AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE AREA WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE WALLS ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE ARE TO BE CONSTRUCTED AS REQUIRED AROUND THE TO BE CONSTRUCTED AS REQUIRED AROUND THE TO BE CONSTRUCTED AS REQUIRED AROUND THE BE CONSTRUCTED AS REQUIRED AROUND THE BE CONSTRUCTED AS REQUIRED AROUND THE CONSTRUCTED AS REQUIRED AROUND THE CONSTRUCTED AS REQUIRED AROUND THE AS REQUIRED AROUND THE AS REQUIRED AROUND THE REQUIRED AROUND THE REQUIRED AROUND THE AROUND THE AROUND THE THE THE AREAS OF CONSTRUCTION. SEE FLOOR PLAN ON SHEET A-103.

AutoCAD SHX Text

AutoCAD SHX Text IN EACH CHANGING AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED EACH CHANGING AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED EACH CHANGING AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED CHANGING AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED CHANGING AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED AREA AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED AND SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED SHOWER STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED STALL, REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED REMOVE AND DISPOSE OF ENTIRE EXISTING SUSPENDED AND DISPOSE OF ENTIRE EXISTING SUSPENDED AND DISPOSE OF ENTIRE EXISTING SUSPENDED DISPOSE OF ENTIRE EXISTING SUSPENDED DISPOSE OF ENTIRE EXISTING SUSPENDED OF ENTIRE EXISTING SUSPENDED OF ENTIRE EXISTING SUSPENDED ENTIRE EXISTING SUSPENDED ENTIRE EXISTING SUSPENDED EXISTING SUSPENDED EXISTING SUSPENDED SUSPENDED SUSPENDED CEMENT PLASTER CEILING DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS PLASTER CEILING DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS PLASTER CEILING DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS CEILING DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS CEILING DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS DROP, RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS RELATED METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS METAL FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS FRAMING, LIGHT FIXTURES AND SUPPLY GRILLE AS LIGHT FIXTURES AND SUPPLY GRILLE AS LIGHT FIXTURES AND SUPPLY GRILLE AS FIXTURES AND SUPPLY GRILLE AS FIXTURES AND SUPPLY GRILLE AS AND SUPPLY GRILLE AS AND SUPPLY GRILLE AS SUPPLY GRILLE AS SUPPLY GRILLE AS GRILLE AS GRILLE AS AS AS REQUIRED FOR INSTALLATION OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR FOR INSTALLATION OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR FOR INSTALLATION OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR INSTALLATION OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR INSTALLATION OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR OF NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR NEW METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR METAL CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR CEILING SYSTEM. SEE REFLECTED CEILING PLAN FOR SYSTEM. SEE REFLECTED CEILING PLAN FOR SYSTEM. SEE REFLECTED CEILING PLAN FOR SEE REFLECTED CEILING PLAN FOR SEE REFLECTED CEILING PLAN FOR REFLECTED CEILING PLAN FOR REFLECTED CEILING PLAN FOR CEILING PLAN FOR CEILING PLAN FOR PLAN FOR PLAN FOR FOR FOR EXTENTS OF DEMOLITION.

AutoCAD SHX Text

AutoCAD SHX Text SHADED AREA INDICATES TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S AREA INDICATES TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S AREA INDICATES TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S INDICATES TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S INDICATES TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S TO REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S REMOVE PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S PORTION OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S OF EXISTING CONCRETE PLASTER CEILING IN JANITOR'S EXISTING CONCRETE PLASTER CEILING IN JANITOR'S EXISTING CONCRETE PLASTER CEILING IN JANITOR'S CONCRETE PLASTER CEILING IN JANITOR'S CONCRETE PLASTER CEILING IN JANITOR'S PLASTER CEILING IN JANITOR'S PLASTER CEILING IN JANITOR'S CEILING IN JANITOR'S CEILING IN JANITOR'S IN JANITOR'S IN JANITOR'S JANITOR'S JANITOR'S CLOSET AS REQUIRED FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, AS REQUIRED FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, AS REQUIRED FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, REQUIRED FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, REQUIRED FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, FOR NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, NEW HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, HVAC EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, EQUIPMENT, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, SEE MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, MECHANICAL DRAWINGS. SIZE IS APPROXIMATE, DRAWINGS. SIZE IS APPROXIMATE, DRAWINGS. SIZE IS APPROXIMATE, SIZE IS APPROXIMATE, SIZE IS APPROXIMATE, IS APPROXIMATE, IS APPROXIMATE, APPROXIMATE, APPROXIMATE, VERIFY SIZE IN FIELD.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND SALVAGE FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. AND SALVAGE FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. AND SALVAGE FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. SALVAGE FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. SALVAGE FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. FOR RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. RELOCATION WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. WALL MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. MOUNTED HOOKS, PATCH AND PAINT MASONRY WALL. HOOKS, PATCH AND PAINT MASONRY WALL. HOOKS, PATCH AND PAINT MASONRY WALL. PATCH AND PAINT MASONRY WALL. PATCH AND PAINT MASONRY WALL. AND PAINT MASONRY WALL. AND PAINT MASONRY WALL. PAINT MASONRY WALL. PAINT MASONRY WALL. MASONRY WALL. MASONRY WALL. WALL. WALL. SEE REFLECTED CEILING PLAN FOR NEW LOCATION.

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: (517) 487-2544

AutoCAD SHX Text

PHONE: (517) 487-2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR CHAVEZ AVE.

AutoCAD SHX Text administrator@matrixceinc.com

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

EXISTING CMU WALL LOCATED BETWEEN BOTH SHOWERS TO BE REMOVED AND DISPOSED.

AutoCAD SHX Text

AutoCAD SHX Text FACILITY TO REMOVE OF EXISTING GREEN SHOWER CURTAINS AND CEILING MOUNTED TRACK, TYPICAL.

AutoCAD SHX Text

N G

B Y

D R

B Y

G B

H , M

E (A

O N

T O

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , N

C A

R B

, D

D M

N D

N A

N D

C O

R U

O N

T D

A-

C T

N O

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

R S

N S

O R

KEY PLAN

SCALE: NTS

wing 'A' wing 'C'

LOWER LEVEL

PLAN

NORTH

wing 'B' wing 'D'

UPPER LEVEL

HOUSING UNITS BIRCH, MAPLE AND PINE ALL SHARE SIMILAR FOOTPRINTS BESIDES PINE - WING A. SEE SHEET

A-105 FOR PINE - WING A DEMOLITION AND FLOOR PLAN.

M A

T R

I X

R ev ie w

W S

D S

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

BIRCH, MAPLE, PINE WING B

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

BIRCH, MAPLE WING A

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

BIRCH, MAPLE, PINE WING D

AutoCAD SHX Text

%%UDEMOLITION PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

BIRCH, MAPLE, PINE WING C

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text

INDICATED EXISTING METAL DIVIDER TO REMAIN, PREP FOR NEW FINISH.

AutoCAD SHX Text

AutoCAD SHX Text SHADED AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AREA INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE INDICATES TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE TO REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE REMOVE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE AND DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE DISPOSE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE OF ALL EXISTING 1" X 1" MOSAIC FLOOR TILE ALL EXISTING 1" X 1" MOSAIC FLOOR TILE ALL EXISTING 1" X 1" MOSAIC FLOOR TILE EXISTING 1" X 1" MOSAIC FLOOR TILE EXISTING 1" X 1" MOSAIC FLOOR TILE 1" X 1" MOSAIC FLOOR TILE 1" X 1" MOSAIC FLOOR TILE X 1" MOSAIC FLOOR TILE X 1" MOSAIC FLOOR TILE 1" MOSAIC FLOOR TILE 1" MOSAIC FLOOR TILE MOSAIC FLOOR TILE MOSAIC FLOOR TILE FLOOR TILE FLOOR TILE TILE TILE (12X24 IN MAPLE) AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY IN MAPLE) AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY IN MAPLE) AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY MAPLE) AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY MAPLE) AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY AND ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY ASSOCIATED TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY TILE BASE IN CHANGING AREA AND SHOWER AS INDICATED BY BASE IN CHANGING AREA AND SHOWER AS INDICATED BY BASE IN CHANGING AREA AND SHOWER AS INDICATED BY IN CHANGING AREA AND SHOWER AS INDICATED BY IN CHANGING AREA AND SHOWER AS INDICATED BY CHANGING AREA AND SHOWER AS INDICATED BY CHANGING AREA AND SHOWER AS INDICATED BY AREA AND SHOWER AS INDICATED BY AREA AND SHOWER AS INDICATED BY AND SHOWER AS INDICATED BY AND SHOWER AS INDICATED BY SHOWER AS INDICATED BY SHOWER AS INDICATED BY AS INDICATED BY AS INDICATED BY INDICATED BY INDICATED BY BY BY DIMENSION STRING. PREPARE FLOOR FOR SCHEDULED NEW FLOOR TILE.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND DISPOSE OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO AND DISPOSE OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO AND DISPOSE OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO DISPOSE OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO DISPOSE OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO OF SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO SHOWER THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO THRESHOLD. GRIND FLOOR SMOOTH AS REQUIRED DUE TO GRIND FLOOR SMOOTH AS REQUIRED DUE TO GRIND FLOOR SMOOTH AS REQUIRED DUE TO FLOOR SMOOTH AS REQUIRED DUE TO FLOOR SMOOTH AS REQUIRED DUE TO SMOOTH AS REQUIRED DUE TO SMOOTH AS REQUIRED DUE TO AS REQUIRED DUE TO AS REQUIRED DUE TO REQUIRED DUE TO REQUIRED DUE TO DUE TO DUE TO TO TO DEMOLITION OF THRESHOLD.

AutoCAD SHX Text

REMOVE AND SALVAGE EXISTING GATE DOOR AND DOOR HARDWARE.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND DISPOSE OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. AND DISPOSE OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. AND DISPOSE OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. DISPOSE OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. DISPOSE OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. OF EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. EXISTING 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. 1" X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. X 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. 1" MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. MOSAIC FLOOR TILE FROM CONCRETE CURB/THRESHOLD. FLOOR TILE FROM CONCRETE CURB/THRESHOLD. FLOOR TILE FROM CONCRETE CURB/THRESHOLD. TILE FROM CONCRETE CURB/THRESHOLD. TILE FROM CONCRETE CURB/THRESHOLD. FROM CONCRETE CURB/THRESHOLD. FROM CONCRETE CURB/THRESHOLD. CONCRETE CURB/THRESHOLD. CONCRETE CURB/THRESHOLD. CURB/THRESHOLD. CURB/THRESHOLD. PREPARE CONCRETE CURB/THRESHOLD FOR NEW FLOOR TILE FINISH. REFER TO FLOOR PLAN.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING WALL MOUNTED MIRRORS IF APPLICABLE.

AutoCAD SHX Text

EXISTING FLOOR DRAIN. SEE PLUMBING DRAWINGS.

AutoCAD SHX Text

REMOVE AND DISPOSE OF EXISTING SHOWER HEAD AND CONTROLS.

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

PLAN

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

AutoCAD SHX Text CUT OUT EXISTING EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL OUT EXISTING EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL OUT EXISTING EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL EXISTING EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL EXISTING EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL EXPANDED METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL METAL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL MESH AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL AND BRACKETS FROM METAL FRAME. EASE OR GRIND ALL BRACKETS FROM METAL FRAME. EASE OR GRIND ALL BRACKETS FROM METAL FRAME. EASE OR GRIND ALL FROM METAL FRAME. EASE OR GRIND ALL FROM METAL FRAME. EASE OR GRIND ALL METAL FRAME. EASE OR GRIND ALL METAL FRAME. EASE OR GRIND ALL FRAME. EASE OR GRIND ALL FRAME. EASE OR GRIND ALL EASE OR GRIND ALL EASE OR GRIND ALL OR GRIND ALL OR GRIND ALL GRIND ALL GRIND ALL ALL ALL SHARP EDGES.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND DISPOSE OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS AND DISPOSE OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS AND DISPOSE OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS DISPOSE OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS DISPOSE OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS OF ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS ALL EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS EXISTING FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS FRP AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS AND ADHESIVE FROM ALL WALLS OF CHANGING AREAS ADHESIVE FROM ALL WALLS OF CHANGING AREAS ADHESIVE FROM ALL WALLS OF CHANGING AREAS FROM ALL WALLS OF CHANGING AREAS FROM ALL WALLS OF CHANGING AREAS ALL WALLS OF CHANGING AREAS ALL WALLS OF CHANGING AREAS WALLS OF CHANGING AREAS WALLS OF CHANGING AREAS OF CHANGING AREAS OF CHANGING AREAS CHANGING AREAS CHANGING AREAS AREAS AREAS AND SHOWERS, IF APPLICABLE.

AutoCAD SHX Text 5'-8"

AutoCAD SHX Text

EXISTING SECURITY SURROUND TO REMAIN, PREP FOR NEW FINISH.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE AND DISPOSE OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING AND DISPOSE OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING AND DISPOSE OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING DISPOSE OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING DISPOSE OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING OF EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING METAL PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING PLATE AT TOP OF DIVIDER FRAME. SALVAGE EXISTING AT TOP OF DIVIDER FRAME. SALVAGE EXISTING AT TOP OF DIVIDER FRAME. SALVAGE EXISTING TOP OF DIVIDER FRAME. SALVAGE EXISTING TOP OF DIVIDER FRAME. SALVAGE EXISTING OF DIVIDER FRAME. SALVAGE EXISTING OF DIVIDER FRAME. SALVAGE EXISTING DIVIDER FRAME. SALVAGE EXISTING DIVIDER FRAME. SALVAGE EXISTING FRAME. SALVAGE EXISTING FRAME. SALVAGE EXISTING SALVAGE EXISTING SALVAGE EXISTING EXISTING EXISTING BRACKETS AND TAMPER RESISTANT FASTENERS.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: (517) 487-2544

AutoCAD SHX Text

PHONE: (517) 487-2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E. CESAR CHAVEZ AVE.

AutoCAD SHX Text administrator@matrixceinc.com

AutoCAD SHX Text

AutoCAD SHX Text FACILITY TO REMOVE OF EXISTING GREEN SHOWER CURTAINS ON GATE DOORS, IF APPLICABLE.

AutoCAD SHX Text

N G

B Y

D R

B Y

U C

O R

T O

G Y

, M A

N A

A N

D B

U D

F M

A D

A M

P . L

A C

H , R

A , N

C A

R B

, D

D M

N D

N A

N D

C O

R U

O N

T D

A-

C T

N O

CLARKSTON, MI

7300 DIXIE HWY.

PHONE

FAX

PHONE

248.605.2030 248.605.2030

48346 #600

WEB DSARCHITECTS.COM

R S

N S

O R

KEY PLAN

SCALE: NTS

wing 'A' wing 'C'

LOWER LEVEL

PLAN

NORTH

wing 'B' wing 'D'

UPPER LEVEL

HOUSING UNITS BIRCH, MAPLE AND PINE ALL SHARE SIMILAR FOOTPRINTS BESIDES PINE - WING A. SEE SHEET

A-105 FOR PINE - WING A DEMOLITION AND FLOOR PLAN.

SHOWER SUPPLIER SHALL FIELD VERIFY THE EXISTING HEIGHT, WIDTH, AND DEPTH FOR EACH SHOWER

CABINET LOCATION PRIOR TO SUBMITTING SHOP DRAWINGS.

VERIFY EXISTING FLOOR DRAIN LOCATIONS TO ENSURE THEY WILL ALIGN WITH THE FLOOR DRAINS IN THE

NEW SHOWER PANS.

VERIFY THE LOCATION OF THE NEW DUCT WORK THAT WILL EXIT STRAIGHT OUT THE BACK OF THE CABINET THROUGH THE EXISTING BLOCK WALL AND WILL NOT COLLIDE WITH ANY EXISTING PIPES OR CONDUIT.

LOCATION OF THE EXHAUST PERFORATIONS MAY VARY FROM SHOWER CABINET TO SHOWER CABINET.

M A

T R

I X

R ev ie w

W S

D S

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING B

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING A

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING D

AutoCAD SHX Text

%%UFLOOR PLAN

AutoCAD SHX Text 1/2" = 1'-0"

AutoCAD SHX Text

SPRUCE - WING C

AutoCAD SHX Text %%uCONSTRUCTION NOTES

AutoCAD SHX Text

AutoCAD SHX Text SHADED AREA INDICATES TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM AREA INDICATES TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM AREA INDICATES TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM INDICATES TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM INDICATES TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM TO PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM PROVIDE FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM FABRIC WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM WATERPROOF MEMBRANE 'REDGARD' BY 'CUSTOM MEMBRANE 'REDGARD' BY 'CUSTOM MEMBRANE 'REDGARD' BY 'CUSTOM 'REDGARD' BY 'CUSTOM 'REDGARD' BY 'CUSTOM BY 'CUSTOM BY 'CUSTOM 'CUSTOM 'CUSTOM BUILDING PRODUCTS' OR EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" PRODUCTS' OR EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" PRODUCTS' OR EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" OR EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" OR EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" EQUAL UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" UNDER NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" NEW FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" FLOOR TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" TILE. EXTEND WATERPROOF MEMBRANE UP WALL 6" EXTEND WATERPROOF MEMBRANE UP WALL 6" EXTEND WATERPROOF MEMBRANE UP WALL 6" WATERPROOF MEMBRANE UP WALL 6" WATERPROOF MEMBRANE UP WALL 6" MEMBRANE UP WALL 6" MEMBRANE UP WALL 6" UP WALL 6" UP WALL 6" WALL 6" WALL 6" 6" 6" MINIMUM. PROVIDE NEW FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200. SLOPE FLOOR TILE TO PROVIDE NEW FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200. SLOPE FLOOR TILE TO PROVIDE NEW FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200. SLOPE FLOOR TILE TO NEW FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200. SLOPE FLOOR TILE TO NEW FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200. SLOPE FLOOR TILE TO FLOOR TILE (PT-1). SEE DETAIL NO. 1 ON SHEET A-200.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Mar 12, 2026.