462ENGINEERINGDATAREQUIREMENTS.pdf
PDF 104 KB Posted
- Attached to
- MEMORY CARD, F-16 Federal contract opportunity
- Solicitation number
- FA821225Q0236
About this file
This is an Engineering Data Requirements document (Hill AFB Form 462) specifying manufacturing requirements for F-16 Compact Flash Memory Cards (Part Number 8395969-1, NSN 7025-01-529-4119WF).
The document outlines key technical specifications including a minimum requirement of 490 MB available space after flash and mandates a metallic casing (instead of plastic) to withstand rigorous aircraft flight line environments. Critical requirements include marking per MIL-STD-130 and implementation of a Counterfeit Prevention Plan (CPP) that complies with DI-MISC-81832 and SAE 5553 aerospace standards. The document emphasizes that any deviations from specifications or material substitutions must receive prior approval from the cognizant engineering activity. Military specifications and standards are not included in the bid set.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821225Q0236 0001.pdf | ||
| QUALITYASSURANCE.pdf | ||
| 1423A001CPP.pdf | ||
| FA821225Q0236.pdf | ||
| 1423B001FATR.pdf | ||
| ITEMDESCRIPTION.pdf | ||
| ENGINEERINGDATALIST.pdf | ||
| SECTIONC.pdf | ||
| 158PACKAGEINGREQUIREMENTS.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
COMPACT FLASH MEMORY CARD. F-16
2. PART NUMBER:
8395969-1
3. NATIONAL STOCK NUMBER:
7025-01-529-4119WF
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130.
8. CARD MUST HAVE A MINIMUM OF 490 MB OF AVAILABLE SPACE AFTER FLASH.
9. DUE TO THE RIGOROUS ENVIRONMENTS FOUND ON AIRCRAFT FLIGHT LINES, CASING MUST BE METALLIC IN LIEU OF
PLASTIC TO MEET THE INDUSTRIAL GRADE REQUIREMENTS.
10.. COUNTERFEIT PREVENTION PLAN (CPP). CONTRACTORS THAT SUPPLY ELECTRONIC PARTS OR SYSTEMS THAT CONTAIN ELECTRONIC PARTS SHALL ESTABLISH POLICIES AND PROCEDURES TO AVOID, DETECT, MITIGATE AND DISPOSITION COUNTERFEIT ELECTRONIC PARTS TO PREVENT SUCH PARTS FROM ENTERING THE USAF/DOD SUPPLY CHAIN. THESE POLICIES AND PROCEDURES SHALL BE DOCUMENTED IN A CPP FOR SUBMISSION AND APPROVAL IN ACCORDANCE WITH DATA ITEM DESCRIPTION (DID) DI-MISC-81832 AND ACCOMPLISHED FOR ALL SPECIFIED CONTRACT ITEMS. DI-MISC-81832 IS APPLICABLE TO PARTS, MATERIAL AND PROCESSES SELECTION (PMPS) ASSOCIATED WITH DELIVERY OF SYSTEMS AND ASSEMBLIES TO THE USAF AND DOD. THE REQUIREMENTS ESTABLISHED BY DI-MISC-81832 ALSO APPLY TO ELECTRONICS COMPONENTS PROCURED IN SUSTAINMENT OF SUCH SYSTEMS AND ASSEMBLIES. THE REQUIREMENTS OF THE RECENTLY DOD-ADOPTED SAE 5553, AEROSPACE STANDARD, COUNTERFEIT ELECTRONICS
PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SHALL ALSO APPLY.
| 2024-10-24T10:42:48-0600 | |
| MEREDITH.JAIME.MICHAEL.1516627502 |
File details come from the government source that posted it. Updated .