4500-CIVIL.pdf

This document is a comprehensive set of architectural and engineering drawings for a new manufacturing plant facility for the GM Assembly Division in Oklahoma City, Oklahoma. The drawings include general notes, typical details, foundation plans for multiple areas, supported slab framing plans, wall elevations and details, exterior wall and grade beam systems, footing location master plans, footing schedules with detailed specifications, and various structural sections and connection details.

The facility design encompasses multiple foundation areas with varying soil-bearing capacities and footing types, including spread footings, pile-supported systems, and reinforced concrete beams. The drawings specify concrete and steel reinforcement requirements, with detailed schedules identifying dead loads, live loads, column sizes, footing dimensions, pile requirements, and diameter specifications for each footing type (designated Types A through FG and alternate configurations). Structural elements include extensive grade beams, supported slabs with specific reinforcement patterns, wall types with detailed elevation drawings showing construction joints and reinforcement locations, and connection details for building perimeter systems. The plans reference multiple areas of the facility with separate foundation plans for Areas 1 through 7 and include plenum areas with supported slab framing. Construction details address drainage systems, exterior wall assemblies, connections at doors and truck docks, column pocket fills, and typical corner framing details at walls and trenches. All specifications reference standard construction practices with reinforcement details and loading calculations throughout the drawing set.