Atch ASOW Atch 5aConvert Building220223 Concept Plans 9pages.pdf
PDF 11 MB Posted
- Solicitation number
- 36C26321R0043
About this file
This pre-solicitation notice outlines requirements for a two-phase design-build contract to renovate Building 223 at the Minneapolis VA Health Care System for pandemic storage. The Department of Veterans Affairs seeks to completely renovate the interior and exterior of the building, section it into three conditioned storage areas for facilities engineering, logistics, and temperature-sensitive supplies, and construct an administrative space above an abandoned coal bin. The estimated value is $2-5 million. Responses to Phase I of the two-phase solicitation process are due on or around February 12, 2021, with Phase II proposals requested thereafter and final award by June 30, 2021. The project is set aside 100% for Service-Disabled Veteran Owned Small Businesses. The renovated building will provide semi-conditioned, conditioned, and sealed storage spaces for facilities engineering, logistics, and pandemic supplies respectively.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Office of Facilities
Management
COVER PAGE
1360-G001
CONVERT BUILDING
220 AND 223
Minneapolis VA Ft Snelling Campus Convert Building 220-223
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
Management
223 PROPOSED
EXTERIOR
1360-A102
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
Management
223 PROPOSED
INTERIOR
1360-A103
CONVERT BUILDING
INTERIOR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
Office of Facilities
Management
SITE PLAN
1360-C101
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. NEW PARKING LOT SERVING BUILDING 222, 224 NEW PARKING LOT SERVING BUILDING 222, 224 2. LOGISTICS LOADING DOCK LOGISTICS LOADING DOCK 3. SEMI SERVICE ROAD SEMI SERVICE ROAD 4. BUILDING 223 PARKING BUILDING 223 PARKING 5. ACCESS TO MNDOT LOT AND FACILITIES ENGINEERING ACCESS TO MNDOT LOT AND FACILITIES ENGINEERING GROUNDS 6. HISTORIC INFORMATION BOARD HISTORIC INFORMATION BOARD 7. PEDESTRIAN WALKWAYS PEDESTRIAN WALKWAYS 8. HISTORIC RETAINING WALL, SAVE HISTORIC RETAINING WALL, SAVE 9. NEW RETAINING WALLNEW RETAINING WALL
6" 2"
8"
8"
8" 6" 6"
6"8"
New 8" to existing 6" 6/1/2018
Office of Facilities
Management
DOMESTIC WATER
1360-CU101
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
4" WATER ABANDONED
AutoCAD SHX Text
2" WATER ABANDONED
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
AutoCAD SHX Text M
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
6" WATER ABANDONED
AutoCAD SHX Text
1" WATER ABDN
AutoCAD SHX Text
1" WATER ABDN
AutoCAD SHX Text
1" WATER ABDN
AutoCAD SHX Text
1" WATER ABDN
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3-19-2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. INSTALL NEW 2" DOMESTIC WATER SERVICE INSTALL NEW 2" DOMESTIC WATER SERVICE 2. INSTALL NEW 6" FIRESUPRSSION SERVICE INSTALL NEW 6" FIRESUPRSSION SERVICE 3. LOCATE AND REMOVE EXISTING 220 BUILDING SERVICE LOCATE AND REMOVE EXISTING 220 BUILDING SERVICE AND VALVE ATE MAIN 4. (BID DEDUCT) REPLACE APPROXIMATELY 150FT OF (BID DEDUCT) REPLACE APPROXIMATELY 150FT OF EXISTING WATER MAIN WITH NEW 8". REMOVE HYDRANT FROM ACROSS STREET AND REINSTALL NEAR INTERSECTION 5. (BID DEDUCT) INSTALL APPROXIMATELY 200 FT OF NEW (BID DEDUCT) INSTALL APPROXIMATELY 200 FT OF NEW 6" MAIN. INSTALL VA PROVIDED HYDRANT TERMINATE FOR FUTURE EXTENSION 6. (BID DEDUCT) INSTALL APPROXIMATELY 330 FT OF NEW (BID DEDUCT) INSTALL APPROXIMATELY 330 FT OF NEW 8" MAIN. INSTALL NEW FIRE HYDRANT. TERMINATE FOR FUTURE EXTENSION 7. (BID DEDUCT) REMOVE ABANDONED FIRE HYDRANT (BID DEDUCT) REMOVE ABANDONED FIRE HYDRANT
Office of Facilities
Management
SANITARY SEWER
1360-CU102
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
ABANDONED 6" CLAY
AutoCAD SHX Text
ABANDONED 6" CLAY
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
SANITARY SEWER
AutoCAD SHX Text
ABANDONED 6" CLAY
AutoCAD SHX Text
ABANDONED 8" CLAY
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3-19-2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. INSTALL NEW SANITARY CONCRETE STRUCTURE INSTALL NEW SANITARY CONCRETE STRUCTURE 2. INSTALL NEW 6" SANITARY SERVICE INSTALL NEW 6" SANITARY SERVICE 3. INSTALL NEW 4" BUILDING SERVICE TO 220 INSTALL NEW 4" BUILDING SERVICE TO 220 4. INSTALL NEW 4" SERVICE TO 223 INSTALL NEW 4" SERVICE TO 223 5. REMOVE AND REPLACE CAP EXISTING 220 AND REMOVE AND REPLACE CAP EXISTING 220 AND ABANDONED MAIN TO EAST.
Office of Facilities
Management
STORM SEWER
1360-CU103
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
STORM
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3-19-2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. CONNECT TO EXISTING STORM SERVICE CONNECT TO EXISTING STORM SERVICE 2. INSTALL NEW STORM LINE INSTALL NEW STORM LINE 3. INSTALL STORM GUTTER AT LOADING DOCK INSTALL STORM GUTTER AT LOADING DOCK 4. (BID DEDUCT) INSTALL AREA DRAIN, CONNECT TO (BID DEDUCT) INSTALL AREA DRAIN, CONNECT TO EXISTING STORM
Office of Facilities
Management
SITE ELECTRIC
1360-CU104
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. PROVIDE NEW ELECTRIC SERVICE PROVIDE NEW ELECTRIC SERVICE 2. PROVIDE CONNECTION TO COMMERCIAL SERVICEPROVIDE CONNECTION TO COMMERCIAL SERVICE
Office of Facilities
Management
SITE COMMUNICATIONS
1360-CU105
CONVERT BUILDING
220 AND 223
AutoCAD SHX Text
BLOOMINGTON ROAD
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
V.A.M.C. PROPERTY
AutoCAD SHX Text
U.S. NAVY
AutoCAD SHX Text
BURR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
DATE
AutoCAD SHX Text Drawing Title
AutoCAD SHX Text Project Title
AutoCAD SHX Text Approved: Division Chief
AutoCAD SHX Text Approved: Service Director
AutoCAD SHX Text Building Number
AutoCAD SHX Text Checked
AutoCAD SHX Text Drawn
AutoCAD SHX Text Location
AutoCAD SHX Text Date
AutoCAD SHX Text Project No.
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text Dwg. Of
AutoCAD SHX Text one-eighth inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-quarter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-eighths inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three-qusrter inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text one and one-half inch = one foot
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text three inches = one foot
AutoCAD SHX Text
V.A. MEDICAL CENTER
AutoCAD SHX Text
ONE VETERANS DRIVE
AutoCAD SHX Text
MINNEAPOLIS, MN 55417
AutoCAD SHX Text Drawing Scale
AutoCAD SHX Text Plot Scale
AutoCAD SHX Text 12" = 1'-0"
AutoCAD SHX Text
TRUE NORTH
AutoCAD SHX Text
PLAN NORTH
AutoCAD SHX Text
BY THE VARIOUS SUBCONTRACTORS.
AutoCAD SHX Text GENERAL CONTRACTOR; THIS WILL BE ACCOMPLISHED UPON COMPLETION OF THE INSTALLATION OF ANY AND ALL UTILITIES INSTALLED
AutoCAD SHX Text GENERAL CONTRACTOR. PATCHING AND REPAIR OF CONCRETE WALLS, FLOOR, OR STRUCTURE SHALL BE THE RESPONSIBILITY OF THE
AutoCAD SHX Text SUBCONTRACTOR. REMOVAL OF DEBRIS RESULTING FROM DEMOLITION, CUTTING, AND/OR DRILLING IS THE RESPONSIBILITY OF THE
AutoCAD SHX Text RESPONSIBILITY OF THE SUBCONTRACTOR BY TRADE; FIRESTOPPING OF THESE OPENING SHALL BE DONE BY THE RESPECTIVE
AutoCAD SHX Text RESPONSIBILITY. CORE DRILLING THROUGH CONCRETE WALLS, FLOORS OR STRUCTURE FOR PIPING OR CONDUIT SHALL BE THE
AutoCAD SHX Text CEILING & FLOORS. ANY AND ALL CUTTING OF CONCRETE FLOORS, WALLS OR STRUCTURE SHALL BE THE GENERAL CONTRACTOR'S
AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR GENERAL DEMOLITION INCLUDING REMOVAL OF WALLS, PARTITIONS, DOORS &
AutoCAD SHX Text
THE WORK WILL BE MADE WITHOUT THE PRIOR APPROVAL OF THE PROJECT ENGINEER.
AutoCAD SHX Text THE CONTRACTOR SHALL NOTIFY THE PROJECT ENGINEER IN WRITING PRIOR TO PROCEEDING WITH CONSTRUCTION; NO ADJUSTMENT TO
AutoCAD SHX Text RESPONSIBLE FOR VARIATIONS BETWEEN PLAN DIMENSIONS AND ACTUAL FIELD DIMENSIONS. WHERE VARIATIONS ARE FOUND TO OCCUR, AutoCAD SHX Text GENERAL CONTRACTOR AND/OR ALL SUBCONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS SHOWN ON THESE PLANS AND SHALL BE
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
I HEREBY CERTIFY THAT THIS PLAN,
AutoCAD SHX Text
SPECIFICATION OR REPORT WAS
AutoCAD SHX Text
PREPARED BY ME OR UNDER MY DIRECT
AutoCAD SHX Text
SUPERVISION AND THAT I AM A DULY
AutoCAD SHX Text
REGISTERED UNDER
AutoCAD SHX Text
THE LAWS OF THE STATE OF MINNESOTA
AutoCAD SHX Text
REGISTRATION NUMBER:
AutoCAD SHX Text
MJH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/20/2019
AutoCAD SHX Text 618-19-118
AutoCAD SHX Text
FT SNELLING
AutoCAD SHX Text
TBD
AutoCAD SHX Text
NA
NOTES: 1. PROVIDE FIBER FROM BUILDING 222 IT CLOSET PROVIDE FIBER FROM BUILDING 222 IT CLOSET 2. UTILISE EXISTING COMM DUCT AND DAND HOLE UTILISE EXISTING COMM DUCT AND DAND HOLE 3. INSTALL NEW HAND HOLE, INTERCEPT EXISTING COMM INSTALL NEW HAND HOLE, INTERCEPT EXISTING COMM DUCT 4. INSTALL FIBER INT BUILDING 223 IT CLOSET INSTALL FIBER INT BUILDING 223 IT CLOSET 5. INSTALL FIBER INTO 220 IT CLOSETINSTALL FIBER INTO 220 IT CLOSET
| Sheets and Views |
| 1.Site 500 Ft Snelling Draft-Cover |
| 1.Site 500 Ft Snelling Draft-220 Historic |
| 1.Site 500 Ft Snelling Draft-220 Concept |
| 1.Site 500 Ft Snelling Draft-223 Historic |
| 1.Site 500 Ft Snelling Draft-223 Existing |
| 1.Site 500 Ft Snelling Draft-223 Exterior |
| 1.Site 500 Ft Snelling Draft-223 Interior |
| 1.Site 500 Ft Snelling Draft-Site Plan |
| 1.Site 500 Ft Snelling Draft-Water |
| 1.Site 500 Ft Snelling Draft-Sanitary |
| 1.Site 500 Ft Snelling Draft-Storm |
| 1.Site 500 Ft Snelling Draft-Electric |
| 1.Site 500 Ft Snelling Draft-Comm |
File details come from the government source that posted it. Updated .