Herzog Asbestos Documents.pdf
PDF 10 MB Posted
- Solicitation number
- 36C25723B0065
About this file
This document provides details for a federal solicitation to correct site deficiencies at the Herzog MRCC Building for the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 17. The solicitation number is 36C25723B0065 and seeks to address corrective work needed at the specified VA medical facility building. Interested contractors should respond by the specified due date to be considered for award of a contract to perform the required maintenance and repair work. Relevant services include asbestos abatement and remediation. The opportunity is open to all qualified contractors.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
J3 Resources, Inc.
6110 W. 34th Street, Houston, Texas 77092
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC; Dallas, TX - Herzog Blvd.
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 02-Feb-2015 04-Feb-2015Date Analyzed:
04-Feb-2015Date Reported:
JH1562540J3 Order #:
K1402Project #:
Cellulose FiberLAYER 1 Mastic, Black, Homogeneous
None Detected012715-01 5%
Other Non-Fibrous Material 95%
Cellulose FiberLAYER 2 Felt, Black, Homogeneous
None Detected 30% Other Non-Fibrous Material 70%
Wollastonite Talc
LAYER 3
Glue, Tan, Homogeneous
None Detected <1% <1
Other Non-Fibrous Material 100%
Cellulose FiberLAYER 1 Mastic, Black, Homogeneous
None Detected012715-02 5% Other Non-Fibrous Material 95%
Cellulose FiberLAYER 2 Felt, Black, Homogeneous
None Detected 30% Other Non-Fibrous Material 70%
WollastoniteLAYER 3 Glue, Gray, Homogeneous
None Detected <1%
Other Non-Fibrous Material 100%
Cellulose FiberLAYER 1 Mastic, Black, Homogeneous
None Detected012715-03 5%
Other Non-Fibrous Material 95%
Cellulose FiberLAYER 2 Felt, Black, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Wollastonite Talc
Glue, Tan/ Black, Homogeneous None Detected012715-04 <1% <1
Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 1 of 2
Lee W. Poye Lab DirectorAnalystDuane Salinas
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC; Dallas, TX - Herzog Blvd.
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 02-Feb-2015 04-Feb-2015Date Analyzed:
04-Feb-2015Date Reported:
JH1562540J3 Order #:
K1402Project #:
Wollastonite Talc
Glue, Tan/ Black, Homogeneous None Detected012715-05 <1% <1
Other Non-Fibrous Material 100%
Cellulose FiberLAYER 1 Mastic, Black, Homogeneous
None Detected012715-06 10%
Other Non-Fibrous Material 90%
Cellulose FiberLAYER 2 Felt, Black, Homogeneous
None Detected 30%
Other Non-Fibrous Material 70%
Wollastonite Talc
LAYER 3
Glue, Tan/ Black, Homogeneous
None Detected <1% <1
Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 2 of 2
Lee W. Poye Lab DirectorAnalystDuane Salinas
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Joint Compound, White, Homogeneous
None Detected111814-01 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
Sealant, Red None Detected111814-02 Other Non-Fibrous Material 100%
Sealant, Red None Detected111814-03 Other Non-Fibrous Material 100%
Sealant, Red None Detected111814-04 Other Non-Fibrous Material 100%
Cove Base Mastic, Tan, Homogeneous None Detected111814-05 Other Non-Fibrous Material 100%
Cove Base Mastic, Tan, Homogeneous None Detected111814-06 Other Non-Fibrous Material 100%
Cove Base Mastic, Tan, Homogeneous None Detected111814-07 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 1
Mastic Wrap, Tan/ Silver, Homogeneous
None Detected111814-08 60% 20%
Other Non-Fibrous Material 20%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 1 of 33
Lee W. Poye Lab DirectorAnalystWanda Porch
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose Fiber Fibrous Glass
LAYER 1
Mastic Wrap, Tan, Homogeneous
Chrysotile111814-09 5% 60% 20%
Other Non-Fibrous Material 15%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
LAYER 1
Mastic Wrap, *Not analyzed per client request
111814-10
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
Fibrous Glass Cellulose Fiber
Foam Insulation, Black, Homogeneous None Detected111814-11 <1% <1
Other Non-Fibrous Material 100%
Fibrous Glass Cellulose Fiber
Foam Insulation, Black, Homogeneous None Detected111814-12 <1% <1
Other Non-Fibrous Material 100%
Fibrous Glass Cellulose Fiber
Foam Insulation, Black, Homogeneous None Detected111814-13 <1% <1
Other Non-Fibrous Material 100%
Mastic, White, Homogeneous None Detected111814-14 Other Non-Fibrous Material 100%
LAYER 1
Mastic Wrap, White/ Black, Homogeneous
None Detected111814-15 Other Non-Fibrous Material 100%
LAYER 2
Mastic Wrap, White/ Red, Homogeneous
None Detected Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 2 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Fibrous GlassLAYER 1 Mastic Wrap, White, Homogeneous
Chrysotile111814-16 5% 15%
Other Non-Fibrous Material 80%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
LAYER 1
Paint/ Joint Compound, White, Homogeneous
None Detected111814-17 Other Non-Fibrous Material 100%
LAYER 2
Paint/ Joint Compound, White/ Tan/ White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberLAYER 3 Wallboard, Brown/ White, Homogeneous
None Detected 10%
Other Non-Fibrous Material 90%
LAYER 1
Texture, White, Homogeneous
None Detected111814-18 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Tape, Tan, Homogeneous
None Detected 100%
LAYER 3
Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberLAYER 4 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 3 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Painted Texture, Tan/ White, Homogeneous
None Detected111814-19 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Tape, Tan, Homogeneous
None Detected 100%
LAYER 3
Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberLAYER 4 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-20 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Tape, Tan, Homogeneous
None Detected 100%
LAYER 3
Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberLAYER 4 Wallboard, Brown/ White, Homogeneous
None Detected 10%
Other Non-Fibrous Material 90%
LAYER 1
Texture, White, Homogeneous
None Detected111814-21 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Tape, Tan, Homogeneous
None Detected 100%
LAYER 3
Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 4
Paint/ Joint Compound, Red/ White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose FiberLAYER 5 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 4 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-22 45% 10%
Other Non-Fibrous Material 45%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-23 45% 10%
Other Non-Fibrous Material 45%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-24 45% 10%
Other Non-Fibrous Material 45%
Fibrous GlassLAYER 1 Mastic Wrap, White, Homogeneous
None Detected111814-25 15% Other Non-Fibrous Material 85%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
LAYER 1
Paint/ Joint Compound, Tan/ White, Homogeneous
None Detected111814-26 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
LAYER 1
Paint/ Joint Compound, Tan/ White, Homogeneous
None Detected111814-27 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 10%
Other Non-Fibrous Material 90%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 5 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Floor Tile, White/ Pastel Specks, Homogeneous
None Detected111814-28 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 1
Floor Tile, White/ Pastel Specks, Homogeneous
None Detected111814-29 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 1
Floor Tile, White/ Pastel Specks, Homogeneous
None Detected111814-30 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cove Base Mastic, Cream, Homogeneous
None Detected111814-31 Other Non-Fibrous Material 100%
Cove Base Mastic, Cream, Homogeneous
None Detected111814-32 Other Non-Fibrous Material 100%
Cove Base Mastic, Cream, Homogeneous
None Detected111814-33 Other Non-Fibrous Material 100%
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-34 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, White/ Brown, Homogeneous
None Detected 10%
Other Non-Fibrous Material 90%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 6 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 02-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Fibrous GlassLAYER 1 Mastic Wrap, White, Homogeneous
None Detected111814-35 20%
Other Non-Fibrous Material 80%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
Fibrous GlassLAYER 1 Mastic Wrap, White, Homogeneous
None Detected111814-36 20% Other Non-Fibrous Material 80%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
LAYER 1
Joint Compound, White, Homogeneous
None Detected111814-37 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, White/ Brown, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
Cellulose Fiber Fibrous Glass
LAYER 1
Mastic Wrap, White/Brown/Silver, Homogeneous
None Detected111814-38 25% 5%
Other Non-Fibrous Material 70%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
LAYER 1
Joint Compound, White, Homogeneous
None Detected111814-39 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, White/ Brown, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 7 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 02-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Fibrous GlassLAYER 1 Mastic Wrap, White, Homogeneous
Chrysotile111814-40 4% 20%
Other Non-Fibrous Material 76%
Fibrous GlassLAYER 2 Insulation, Pink, Homogeneous
None Detected 100%
Sealant, Red, Homogeneous None Detected111814-41 Other Non-Fibrous Material 100%
LAYER 1
Floor Tile, Gray/ Black, Homogeneous
None Detected111814-42 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 1
Floor Tile, Gray/ Black, Homogeneous
None Detected111814-43 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 1
Floor Tile, Gray/ Black, Homogeneous
None Detected111814-44 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
Mastic, Black, Homogeneous None Detected111814-45 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-46 40% 20%
Other Non-Fibrous Material 40%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 8 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-47 40% 20%
Other Non-Fibrous Material 40%
Cellulose Fiber Fibrous Glass
LAYER 1
Mastic Wrap, White, Homogeneous
None Detected111814-48 25% 5%
Other Non-Fibrous Material 70%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
Cellulose Fiber Fibrous Glass
LAYER 1
Mastic Wrap, White/ Silver, Homogeneous
None Detected111814-49 25% 5%
Other Non-Fibrous Material 70%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
Cellulose Fiber Fibrous Glass
LAYER 1
Wrap, White/ Silver, Homogeneous
None Detected111814-50 50% 5%
Other Non-Fibrous Material 45%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 100%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-51 40% 20%
Other Non-Fibrous Material 40%
LAYER 1
Cove Base, Gray, Homogeneous
None Detected111814-52 Other Non-Fibrous Material 100%
LAYER 2
Cove Base Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 9 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 02-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Cove Base, Gray, Homogeneous
None Detected111814-53 Other Non-Fibrous Material 100%
LAYER 2
Cove Base Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 1
Cove Base, Gray, Homogeneous
None Detected111814-54 Other Non-Fibrous Material 100%
LAYER 2
Cove Base Mastic, Yellow, Homogeneous
None Detected Other Non-Fibrous Material 100%
Paint/Texture, White, Homogeneous None Detected111814-55 Other Non-Fibrous Material 100%
Paint/Texture, White, Homogeneous None Detected111814-56 Other Non-Fibrous Material 100%
Paint/Texture, White, Homogeneous None Detected111814-57 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-58 60% <1
Other Non-Fibrous Material 40%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-59 60% <1
Other Non-Fibrous Material 40%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-60 60% <1
Other Non-Fibrous Material 40%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 10 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Mastic, Black, Homogeneous
None Detected111814-61 Other Non-Fibrous Material 100%
LAYER 2
Foil, Silver, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 3
Tape, White, Homogeneous
Chrysotile 75% Other Non-Fibrous Material 25%
Fibrous GlassLAYER 4 Insulation, White, Homogeneous
Amosite Chrysotile
2% <1
10% Other Non-Fibrous Material 88%
LAYER 1
Mastic, Black, Homogeneous
None Detected111814-62 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Canvas Wrap, Off White, Homogeneous
None Detected 100%
LAYER 3
Insulation, *Not analyzed per client request
LAYER 1
Mastic, Black, Homogeneous
None Detected111814-63 Other Non-Fibrous Material 100%
LAYER 2
Foil, Silver, Homogeneous
None Detected Other Non-Fibrous Material 100%
LAYER 3
Insulation, *Not analyzed per client request
Cellulose Fiber Fibrous Glass
Duct Sealant, Gray, Homogeneous None Detected111814-64 2% <1
Other Non-Fibrous Material 98%
Cellulose Fiber Fibrous Glass
Duct Sealant, Gray, Homogeneous None Detected111814-65 2% <1
Other Non-Fibrous Material 98%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 11 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose Fiber Fibrous Glass
Duct Sealant, Gray, Homogeneous None Detected111814-66 2% <1
Other Non-Fibrous Material 98%
LAYER 1
Paint/Joint Compound, White, Homogeneous
None Detected111814-67 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
LAYER 1
Paint/Joint Compound, Gray/ White, Homogeneous
None Detected111814-68 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ Pink, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
LAYER 1
Paint/Joint Compound, Gray/ White, Homogeneous
None Detected111814-69 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ Pink, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Duct Sealant, Gray, Homogeneous None Detected111814-70 Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 12 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-71 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Tape, Beige, Homogeneous
None Detected 100%
LAYER 3
Joint Compound, White, Homogeneous
None Detected Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 4
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-72 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Cellulose FiberLAYER 1 Mastic, White, Homogeneous
None Detected111814-73 2% Other Non-Fibrous Material 98%
Cellulose Fiber Fibrous Glass
LAYER 2
Paper/Foil, White/ Silver, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
Fibrous GlassLAYER 3 Insulation, Yellow, Homogeneous
None Detected 98%
Other Non-Fibrous Material 2%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 13 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose FiberLAYER 1 Mastic, White, Homogeneous
None Detected111814-74 2%
Other Non-Fibrous Material 98%
Cellulose Fiber Fibrous Glass
LAYER 2
Paper/Foil, White/ Silver, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
Fibrous GlassLAYER 3 Insulation, Yellow, Homogeneous
None Detected 98% Other Non-Fibrous Material 2%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-75 55% 2%
Other Non-Fibrous Material 43%
Cellulose FiberLAYER 1 Mastic, White, Homogeneous
None Detected111814-76 2%
Other Non-Fibrous Material 98%
Cellulose Fiber Fibrous Glass
LAYER 2
Paper/Foil, White/ Silver, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
Fibrous GlassLAYER 3 Insulation, Yellow, Homogeneous
None Detected 98% Other Non-Fibrous Material 2%
Synthetic FiberInterior Window Caulk, Gray, Homogeneous
Chrysotile111814-77 2% 3% Other Non-Fibrous Material 95%
Cove Base Adhesive, Yellow, Homogeneous
None Detected111814-78 Other Non-Fibrous Material 100%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 14 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Floor Tile, Brown/ White/ Mottled, Homogeneous
None Detected111814-79 Other Non-Fibrous Material 100%
LAYER 2
Mastic, Black, Homogeneous
Chrysotile 5% Other Non-Fibrous Material 95%
LAYER 1
Floor Tile, Brown/ White/ Mottled, Homogeneous
None Detected111814-80 Other Non-Fibrous Material 100%
LAYER 2
Mastic, *Not analyzed per client request
Floor Tile, Brown/ White/ Mottled, Homogeneous
None Detected111814-81 Other Non-Fibrous Material 100%
LAYER 2
Mastic, *Not analyzed per client request
CMU Block Paint/Texture, Green/ White, Homogeneous
None Detected111814-82 Other Non-Fibrous Material 100%
CMU Block Paint/Texture, Gray/ White, Homogeneous
None Detected111814-83 Other Non-Fibrous Material 100%
Cove Base Adhesive, Tan/ Black, Homogeneous
None Detected111814-84 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-85 55% 2%
Other Non-Fibrous Material 43%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 15 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
WollastoniteLAYER 1 Mastic, White, Homogeneous
None Detected111814-86 <1%
Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Foil/Paper Wrap, Silver/ Brown, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
Fibrous GlassLAYER 3 Insulation, Yellow, Homogeneous
None Detected 98% Other Non-Fibrous Material 2%
Cove Base Adhesive, Yellow, Homogeneous
None Detected111814-87 Other Non-Fibrous Material 100%
LAYER 1
Joint Compound, White, Homogeneous
None Detected111814-88 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Synthetic FiberInterior Window Caulk, Gray, Homogeneous
Chrysotile111814-89 2% 3%
Other Non-Fibrous Material 95%
Paint/Texture, Off White/ White, Homogeneous
None Detected111814-90 Other Non-Fibrous Material 100%
Cove Base Adhesive, Yellow, Homogeneous
None Detected111814-91 Other Non-Fibrous Material 100%
Fibrous GlassFire Stop, Red, Homogeneous None Detected111814-92 4% Other Non-Fibrous Material 96%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 16 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
LAYER 1
Joint Compound, White, Homogeneous
None Detected111814-93 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-94 55% 2%
Other Non-Fibrous Material 43%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-95 55% 2%
Other Non-Fibrous Material 43%
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-96 Other Non-Fibrous Material 100%
Cellulose FiberLAYER 2 Wallboard, Brown/ White, Homogeneous
None Detected 10% Other Non-Fibrous Material 90%
Cellulose FiberLAYER 1 Mastic, White, Homogeneous
None Detected111814-97 2% Other Non-Fibrous Material 98%
Cellulose Fiber Fibrous Glass
LAYER 2
Paper/Foil, White/ Silver, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 17 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
Cellulose FiberLAYER 1 Mastic, White, Homogeneous
None Detected111814-98 2%
Other Non-Fibrous Material 98%
Fibrous GlassLAYER 2 Insulation, Yellow, Homogeneous
None Detected 98% Other Non-Fibrous Material 2%
Door Caulk, Tan/ Gray, Homogeneous Chrysotile111814-99 3% Other Non-Fibrous Material 97%
Window Caulk, White, Homogeneous Chrysotile111814-100 4% Other Non-Fibrous Material 96%
LAYER 1
Painted Texture, White, Homogeneous
None Detected111814-101 Other Non-Fibrous Material 100%
LAYER 2
Joint Compound, Off White, Homogeneous
Chrysotile <1% Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 3
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Mastic, Black, Homogeneous None Detected111814-102 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
Ceiling Tile, White/ Gray, Homogeneous None Detected111814-103 55% 2%
Other Non-Fibrous Material 43%
This report relates only to the materials tested. This report is for the exclusive use of the addressed client and shall not be reproduced except in full, without written approval by J3 Resources, Inc. (J3). Samples are analyzed according to the methods listed above and are subject to the inherent limitations of PLM and interference of matrix components. Reporting limit for the above method is a function of the quantity of sample analyzed, matrix interference, sample preparation, fiber size, and distribution. Asbestos may be detected in concentrations of <1% by area if sufficient material is analyzed. J3 recommends TEM confirmation of soils, vermiculite and non-friable organically bound materials (NOB) reported as None Detected or < 1% Asbestos by PLM. All samples received in good condition unless otherwise noted. This report shall not be used to claim product approval, certification, or endorsement by NVLAP, NIST, or any agency of the federal government.
NVLAP Lab Code: 200525-0; AIHA Lab ID: 157714; TDSHS License: 30-0273 Page 18 of 33
Phone: (713) 290-0221 - Fax: (713) 290-0248
J3Resources.com
VAMC Dallas; Herzog Bldg 4900 Lancaster Rd
PO Box 1225 Dickinson TX 77539
Micro Air of Texas Melissa Kiser
Bulk Asbestos Fiber Analysis by Polarized Light Microscopy (PLM)
EPA 600/M4-82-020; 600/R-93/116
Sample Description Asbestos
ConstituentsSample ID # Non-Asbestos Constituents
Date Received: 24-Nov-2014 01-Dec-2014Date Analyzed:
02-Dec-2014Date Reported:
JH1461519J3 Order #:
K1402Project #:
WollastoniteLAYER 1 Mastic, White, Homogeneous
None Detected111814-104 <1%
Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Paper/Foil, Brown/ Silver, Homogeneous
None Detected 60% 20%
Other Non-Fibrous Material 20%
Cove Base Adhesive, Yellow, Homogeneous
None Detected111814-105 Other Non-Fibrous Material 100%
Cove Base Adhesive, Tan/ Black, Homogeneous
None Detected111814-106 Other Non-Fibrous Material 100%
LAYER 1
Paint/Joint Compound, White, Homogeneous
None Detected111814-107 Other Non-Fibrous Material 100%
Cellulose Fiber Fibrous Glass
LAYER 2
Wallboard, Brown/ White, Homogeneous
None Detected 10% <1
Other Non-Fibrous Material 90%
Synthetic FiberInterior Window Caulk, Gray, Homogeneous
Chrysotile111814-108 2% 4%
Other Non-Fibrous Material 94%
Wolla…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .