A0006_Attachment D_Appendix H Cutsheets.pdf

Appendix H Cut Sheets

Hospital Bed Service Lift

Medical Equipment Lifting Systems

SVI International, Inc.

800-321-8173 • 815-748-0200

155 Harvestore Drive • DeKalb, IL 60115

Model

HBL-1000

Pictured

Hospital beds have progressively become more complex and feature-packed over the years. These sophisticated beds provide superior patient comfort and ultimate control to providers and caregivers alike.

All of this does not come without presenting additional challenges to hospital equipment maintenance personnel worldwide.

Today’s beds are not only heavier, they contain more moving parts, linkages, drive motors, electronics, etc.

Servicing and maintaining these high-tech beds has never been more important or demanding. Utilizing the most effective tools to safely and productively perform hospital bed maintenance is a top priority of professional staff at health care operations everywhere.

SVI meets these needs as one of the medical industry’s first and most economically versatile supplier of the safest hospital bed service lifts available.

Easily service and maintain hospital beds and other medical equipment, such as large wheelchairs, when you use SVI’s Medical Equipment Lifts.

SVI Hospital Bed Service Lift SVI has been producing custom lifting equipment for decades. Some of the industries we serve include pharmaceutical, medical, paint, food, printing, turf equipment, automotive, and specialty manufacturing applications.

SVI Hospital Bed Service Lifts are ideally-suited for use with Hill-Rom, Stryker, Joerns, Gendron, Drive and other hospital bed makes to just name a few. Optional specialty bedframe or caster-engaging lifting adapters can be tailored for use to successfully lift the most challenging bed styles for servicing and maintenance.

B A L T I M O R E • C H I C A G O • L O S A N G E L E S

SVI is Versatile! SVI is your Answer!

www.svimedical.com www.sviinternational.com

Options available to meet your needs!

800-321-8173 www.svimedical.com www.sviinternational.com Call today to learn more.

SVI is very versatile and can custom-tailor a lift to meet your specific needs.

Positive Engaging Carriage Safety Lock Swing Arm Lock

Custom Lifting Adapters Available

Standard Adapter, Optional Adapters

Are Available

Chain Drive

Handle for Lift Width Adjustment

Power Unit and Lock Release can be remotely wall-mounted or attached right to the Lifting Column.

110 Volt Power Unit

Pushbutton Lock Release

Standard Lift Length 48” / 122 cm

Available Lifting

Heights 48” / 122 cm 60” / 152 cm 72” / 182 cm

Shrouded Solenoid-Operated Safety Lock System, Locks Every 4”

1,000 lb. / 453Kg Lifting Capacity Model HBL-100016” to 60”

40 cm to 152 cm Lift Arm Width Adjustment

Telescoping and Folding Arms Keep

Floor Area Clear when Lift Not in Use.

Options Available.

Super Smooth Chain Over

Hydraulic Cylinder Lifting Action

Low-Profile Lift Arms are only 2-3/16” tall for ease of lifting virtually any hospital bed.

Made in Illinois - USA

All names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that this product is the product of these manufacturers.

Entire Contents ©2020, SVI International, Inc. Specifications subject to change without notice.

SVI Model # Capacity Stroke / Rise Lifting Arm Style Control HBL-1000-48-FL-RR 1000 lbs. 48” stroke/rise Folding Locking lifting arms Remote Operator Control HBL-1000-60-FL-RR 1000 lbs. 60” stroke/rise Folding Locking lifting arms Remote Operator Control HBL-1000-72-FL-RR 1000 lbs. 72” stroke/rise Folding Locking lifting arms Remote Operator Control HBL-1000-60-FL-CM 1000 lbs. 60” stroke/rise Folding Locking lifting arms Column Mount Operator Control HBL-1000-72-FL-CM 1000 lbs. 72” stroke/rise Folding Locking lifting arms Column Mount Operator Control

See popular Hospital Bed Lift models above. Other options available. For the lifting arm style, options include:

-FN Folding No lock lifting arms • -ST Solid Telescoping lifting arms • -SP Solid Plain lifting arms

May 10, 2022

Manufacturer Surf Overhead Stop 902_A ABH

Hands Free Actuator 10MS41-S BEA Inc.

Passage Latch 45H0N 15H AM Best

Office Lock 45H7AB 15H AM Best

Classroom Lock 45H7R 15H AM Best

Door Operator 4100 LE Horton Automatics

Continuous Hinge HG305 CTP AS Markar

ElectroLynx Harness QC-C003 McKinney

ElectroLynx Harness QC-C1500 McKinney

Astragal 18041CNB Pemko

Astragal 357C Pemko

Gasketing S88D Pemko

Wall Stop 406 Rockwood

Dust Proof Strike 570 Rockwood

Coordinator 2672 Rockwood

Flush Bolt 2842 Rockwood

Mounting Bracket 2601AB or C Rockwood

Silencer 608-RKW Rockwood

Armor Plate K1050 (F) 35" H x 2" LDW CSK BEV Rockwood

Kick Plate K1050 10" H x 2' LDW CSK BEV Rockwood

Multi-Point Lock ELR 12 NB SG 55 701515 ETL Sargent

Surface Closer MC 351 CPS Sargent

Surface Closer MC 351 O Sargent

Surface Closer MC 351 P10 Sargent

Electric Power Transfer EL-CEPT Securitron

Hinge, Full Mortise FBB179 NRP Stanley

Hinge, Full Mortise, Hvy Wt FBB199 NRP Stanley

Little Rock VA

Apogee Consulting Group

Catalog Cuts

Innovation, Quality, Customer Service...

Specify When Ordering

• Model Number

• Finish

• Option(s), if applicable

9000A Series Surface Mount, Heavy Duty, Adjustable

Overhead Holders & Stops

Standard Features

• Surface mount

• Heavy duty

• Stop, hold-open and friction functions available

• Single acting doors only

• Non-handed weight doors from 85° to 110° (5° increments)

• Shock absorbing spring provides 3° to 5° cushion before dead-stop

• Standard fasteners supplied with sex bolts for 1-¾” to 2-¼” thick door (see options for other door thicknesses)

• UL Listed as Miscellaneous Fire Door Accessories for use on rated up to 3 hours (stop function only)

• Average weight per unit = 6 lbs.

Options Available (see page B-5 for details)

• THICK – Fasteners for doors other than 1-¾” to 2 -¼” thick

– Specify door thickness

• SEC – Security fasteners

• AJB - 90541 Angle jamb bracket for pull side mount or push side

• LL – For lead-lined door applications

• CL - For use with cam lift hinges

• LS – Less shock-absorbing spring for special applications

• N – All stainless steel

(non-ferrous) components for wet environments to prevent corrosion

• T – Threaded pivot screw and nylon washer to replace jamb bracket

• HC - Hold Closed

• SPECIAL – Contact ABH if the dimensions, hardware or is shown on the template or if additional hardware is being used at the top of the door.

A custom template and/or unit may be required.

• If using a closer, please go to our website and reference “ABH Overhead Holder & Stop Compatibility Chart” to

Material

• Stainless steel is the standard base material for arm, channel

Door Frame Opening Model Number

Hinges or Offset Pivots Hold Open Stop Friction

28" - 31- 9011A 9021A 9031A

32" - 39- 9012A 9022A 9032A

40" - 43- 9013A 9023A 9033A

44" - 54" 9014A 9024A 9034A

ANSI Code C02511 C02541 C02531

Architectural Builders Hardware Manufacturing, Inc.

1222 Ardmore Avenue, Itasca, IL 60143

Tel: 630-875-9900 • Fax: 630-875-9918 / 800-932-9224 Web: www.abhmfg.com • Email: abhinfo@abhmfg.com B-20 2014 ABH Mfg., Inc.

Jillian Lewis Rectangle

W

W .B

EA

SE

N

SO

R S.

C O

M

4 - 24’’

STAINLESS STEEL, TOUCHLESS ACTUATOR WITH

ADJUSTABLE RANGE AND RELAY HOLD TIME

Ideal For Harsh Environments IP55 rated enclosure capable of use in industrial and extreme washdown environments

Activation Alerts Adjustable audible alert setting, including silent-mode required for hospitals and other noise-sensitive environments

Adjustable Detection Zone Adjustable sensing zone from 4 to 24 inches (timed or toggle)

Adjustable Hold Time Configurable output hold time of 1/2 to 30 seconds allowing unique, user-defined device placement

Durable Faceplate Stainless steel faceplate increases durability and protection from daily cleaning

DESCRIPTION

BEA’s MAGIC SWITCH® Family provides a highly accessible and germ-free door activation without physical contact.

Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare, retail, industrial and commercial settings.

Using microwave technology, BEA’s MS41 produces a detection field with a reliable and consistent transmission in interior and exterior applications. Capable of detecting a moving hand, cart or wheelchair. Plus, an adjustable hold time offers flexibility to meet ANSI standards.

The MS41 features rounded corners and a customizable illuminated ring with audible signaling. The durable design suits sterile, wash-down applications such as surgical, wash-down, clean room and pharmaceutical environments.

MS41

High-Visibility Animated or static Illuminated ring allows for high-visibility in low light areas

TECHNOLOGY

Watch the product video

VIDEO CERTIFICATIONS

EN

https://us.beasensors.com/en/ https://youtu.be/2k2bG41FCC4 https://youtu.be/2k2bG41FCC4 https://youtu.be/2k2bG41FCC4

W W W. B E A S E N S O R S . C O M

.0

7.

APPLICATIONS

Healthcare Environments Clean Rooms and Sterile Facilities Washdown Resistant

TECHNICAL SPECIFICATIONS

M S4

ST

A

IN

LE

SS

S

TE

EL

, T

O U

C H

LE

SS

A C

TU

A

TO

R

W

IT

H A

D

JU

ST

A

BL

E

RA

N

G E

A N

D R

EL

A

Y H

O

LD

T

IM

E

Stainless steel single gang -text + hand logo

Stainless steel single gang -text + accessibility logo

Stainless steel double gang -text + hand logo

10MS41-S 10MS41-SA 10MS41-D

PRODUCT SERIES

Technology Radiated Frequency Radiated Power Density

Microwave Doppler Radar

24.125 GHz

< 5 mW/cm2

Detection Mode Motion (bidirectional)

Detection Range 4 – 24” (adjustable)

Output Max. Contact Voltage Max. Contact Current Max. Switching Power

Relay with switch-over contact (voltage-free)

60 VDC / 125 VAC

1A (resistive)

30 W (DC) / 60 VA (AC)

Output Hold Time 0.5 – 30 s

Supply Frequency 50 – 60 Hz

Supply Voltage 12 – 24 VAC ±10%

12 – 24 VDC +30% / -10%

Power Consumption < 1.5 W

Wire Gauge 26 – 22 AWG

Weight 0.34 lbs

Material Stainless Steel

Temperature Range -4 – 131 °F

IP Rating* IP55 Apply silicone to achieve IP65

Dimensions Single Gang Double Gang Round Cube

4 1/2” (H) × 2 3/4” (W) × 9⁄50” (T) 4 1/2” (H) × 4 1/2” (W) × 9⁄50” (T) 6” (D) × 9⁄50” (T) 2 1⁄16” (H) × 1 13⁄16” (W) × 1 1⁄8” (T)

Certification EMC: 2004 / 108 / EC

FCC: G9B-210161

IC: 4680A-210161

* See Users Guide

** MS41 Single, Double and Round adapter bracket 70.5236 is included in the box. The adapter bracket can be used to replace a mudring whose opening measures less than 2”

10MS41-SP Stainless steel single gang - plain

10MS41-DP Stainless steel double gang - plain

10MS41-RP Stainless steel round plate - plain

Stainless steel double gang -text + accessibility logo

Stainless steel round plate -text + hand logo

Stainless steel round plate -text + accessibility logo

10MS41-DA 10MS41-R 10MS41-RA

DISCLAIMER Information is supplied upon the condition that the persons receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will BEA be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. BEA has the right without liability to change descriptions and specifications at any time.

900 MHz retrofit transmitter

10TD900TR

T 1-800-523-2462 / F 1-888-523-2462 / E info-us@BEAsensors.com

BEA AMERICAS / RIDC Park West / 100 Enterprise Drive / Pittsburgh, PA

Subassembly depth 1 1⁄8” Cube width

1 13⁄16” https://us.beasensors.com/en/

M O

R T

IS

E L

O C

K S E T S

Heavy Duty Mortise Locks

40H SERIES

3O R T I S E L O C K S

ADA-Americans With Disabilities Act:

45H Series - The design and operation of the BEST® mortise lock meets the intent of the standard for ANSI A117.1 section 404.2.6.

Builders Hardware Manufacturers Association:

45H Series - ANSI A156.13, Series 1000, Grade 1 Operation and Strength, Grade 2 Security. To meet Grade 1 Security, a drill resistant core (1CD, 1CDP, 1CDF, or 1CDX) must be used with escutcheon trims, and 1E7K4 high security cylinder must be used with sectional trims.

47H Series - ANSI A156.13, Series 1000, Grade 1 Operational, Strength, and Security.

Underwriters Laboratories®

The 40H series is listed by Underwriters Laboratories for use on a 3 hour A label doors. These locks also carry the C-UL mark which is officially accepted in all of Canada, indicating compliance with appropriate Canadian standards and codes. The 47H series locks conform to UL437 standard for key locks, referencing door locks.

The 1E7J4 cylinder used in the 47H series also conforms to UL437 standard for key locks, referencing high security cyl in ders, and is listed for Canada as well as the United States.

Florida Building Code (FBC) Listed and Miami-Dade County Code Compliance Office See certification listing for all 40H series lock functions that are certified for use in applications requiring a design pressure rating as specified.

Finishes:

• 605 – bright brass, clear coated

• 606 – satin brass, clear coated

• 611 – bright bronze, clear coated

• 612 – satin bronze, clear coated

• 613* – oxidized satin bronze, oil rubbed

• 618 – bright nickel plated, clear coated (brass base material)

• 619 – satin nickel plated, clear coated (brass base material)

• 622 – flat black coated (brass base material)

• 625 – bright chromium plated (brass base material)

• 626 – satin chromium plated (brass base material)

• 629 – bright stainless steel

• 630 – satin stainless steel

• 690* – dark bronze coated (brass base material) *613 finish is designed to wear over time, providing an “antique” appearance.

690 finish will continue as a dark brown appearance over time.

Antimicrobial Finish

• 626AM – satin chrome plated with UltraShield™ antimicrobial protected coating

• 630AM – satin stainless steel with UltraShield™ antimicrobial protected coating The Stanley Security Solutions UltraShield™ finish inhibits the growth of bacteria and other microbes on the surface of the hardware.

NOTE: Stanley’s UltraShield™ option is recommended for use on any hardware application where product cleanliness is a high priority. i.e;. Hospital/Healthcare, Elderly Care, Education, Transportation, Food-Service, Hospitality.

#4 Knob: Diameter – 2 1/8” ; Projection on door – 2 7/8” Material machined from solid brass or bronze.

Decorative and Special Order Lever Handles: Stainless steel base material with applied finish.

Standard Lever Handles: Brass, bronze, or stainless steel base material for standard lever designs. Lever styles #3, #14, and #15 return to a minimum of 1/2” of door surface. Lever styles #3 and #14 conform to California Titles 19 and 24. Lever styles 12, 16 and 17 do not return. Levers project 2 15/16” from door surface with H, J, R and S trim. Levers project 3 1/64” with M and N trim.

Roses: Wrought brass, bronze, or stainless steel base material.

H – Flat w/ round edge, 2 3/4” diameter.

R – Contoured w/ round edge, 2 3/4” diameter.

S – Flat w/ beveled edge, 3 1/2” diameter.

Escutcheons: J – Wrought brass, bronze, or stainless steel base material, 7 1/2” H x 2 9/32” W x 17/32” T. M & N – Forged brass or bronze, 8” H x 2 1/8” W x 37/64” T, through bolt mounted (no exposed screws outside). M – Standard cylinder; N – Concealed cylinder.

Vandal Trim: VT–Vandal trim is available in standard finish for H, J, M, N, R, and S trims in either #14 or #15 levers.

NOTE: Not available in single or dummy trim functions. If compliance to California Building Code Title 19 & 24 is required, the #14 lever design must be specified.

Visual Indicators:

VIN–Visual indication uses an unlocked padlock or locked padlock image with red background to indicate lock state.

VIT–Visual indication uses a thumb-turn with color coded locked and unlocked icons – red indicates door is secure and green indicates door is unsecure.

S P E C

IF

IC

A T

IO

N

SSPECIFICATIONS

UltraShield™

The 40H series lock has received a notice of acceptance from Miami-Dade County and is considered Miami-Dade County product. “WS” option must be ordered for the lock to include a “Miami-Dade County Product Control Approved” label for inspection purposes.

Auxiliary bolt: Stainless steel, non-handed.

Backset: 2 3/4” Case: 0.095” cold rolled steel, 5 7/8” H x 7/8” D x 4 1/16” W. Steel is zinc dichromate plated for corrosion protection.

Deadbolt: Stainless steel, 1” throw.

Latchbolt: Solid stainless steel, 3/4” throw. Latch is oil-impregnated for anti-friction operation. Reversible without opening case.

Strike: For complete strike package spec’s see page 5.

Door Thickness: Standard lock configuration designed for doors 1 3/4” thick. Thick door configuration available for doors up to 5” thick (specify thickness when ordering).

Faceplate: Stainless steel, brass or bronze material, 8” H x 1 1/4” W x 1/16” T. Lock face automatically adjusts to proper bevel during

Description Model Single Door Double Door

PSF w/o DeadBolt 45H and 47H +-60 +-35 PSF w/ DeadBolt 45H and 47H +-100 +-50 PSF w/ DeadBolt 48H and 49H +-50 +-50

6 H E A V Y D U T Y MO R T I S E L O C K S

H O

W T

O O

R D

E

R HOW TO ORDER: 45H

45H 7 R 14 H 626 RH

Series Core

Housing Function Code Lever

Style Trim Style

Finish Door Hand

Options

45H– standard mortise lock

0– non keyed or dummy trim

7– 7 pin housing accepts all BEST cores

A– office D– storeroom L– privacy N– passage R– classroom T– dormitory etc.

Standard Levers:

3– solid tube/return 12– solid tube/no return 14– curved return 15– contour/angle return 16– curved/no return 17– gull wing

Knobs:

4– round

H– 2 3/4” dia.

R– 2 3/4” dia.

S– 3 1/2” dia.

J– wrought M– forged N– forged (concealed cyl.)

618 626 630 690

Satin 606 612 613 619

Bright 605 611 622 625

Antimicrobial

626AM

630AM

RH

RHRB

LH

LHRB

LL– lead lined SH– security head screws Thick Door– (specify thickness if other than1 3/4” ) TAC– tactile lever/knob 7/8 LTC– 7/8” lip-to-center strike VIN*– visual indicator S1– standard strike S5– latchbolt-only strike S6– latchbolt/deadbolt strike VT– vandal trim VIT– visual indicator thumb-turn pages 14-17 page 3 page 8

14 H E A V Y D U T Y MO R T I S E L O C K S

FUNCTIONS

F U

N C

T

IO

N S

Function & Diag. Description Outside Lever or Knob Inside Knob/Lever ANSI No. Latch operated by Deadbolt operated by Locked by Unlocked by Locked by Unlocked by

Single Keyed A-Office (F04) • Rotating inside lever,

• Rotating outside lever– only when locking toggle is in unlocked position,

• Turning key in outside cylinder.

N/A Placing locking toggle in locked position

Placing locking toggle in unlocked position

Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch AB-Office (F20) • Rotating inside lever,

• Rotating outside lever–only when locking toggle is in unlocked position,

• Turning key in outside cylinder.

• Turning key in outside cylinder,

• Inside turn lever,

• Inside lever retracts deadbolt and latch simultaneously.

• Placing locking toggle in locked position,

• Projecting dead-bolt by key or turn lever.

Turning key in outside cylinder and placing locking toggle in unlocked position

Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch

AT-Office (F04) • Rotating inside lever,

• Rotating outside lever only when unlocked by key or turn lever,

• Turning key in outside cylinder.

N/A • Turning inside lever,

• Turn key in outside cylinder.

• Turning inside turn lever,

• Turning key in outside cylinder.

Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch D-Storeroom (F07) • Rotating inside lever,

• Turning key in outside cylinder.

N/A Always locked Cannot be unlocked Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch H-Hotel (F15) • Rotating inside lever,

• Turning key in outside cylinder.

• Turning inside turn lever,

• Turning emergency key in O/S cylinder.

(Rotating inside lever retracts deadbolt and latch simultaneously.)

Always locked Cannot be unlocked Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch. Throwing deadbolt blocks out all keys except “ER” key.

HJ-Hotel (F15) • Rotating inside lever,

• Turning key in outside cylinder.

• Turning inside turn lever,

• Turning emergency key in O/S cylinder.

(Rotating inside lever retracts deadbolt and latch simultaneously.)

Always locked Cannot be unlocked Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch. Throwing deadbolt blocks out all keys except “ER” key.

R-Classroom (F05) • Rotating inside lever,

• Rotating outside lever only when unlocked by key, •Turning key in outside cylinder.

N/A Turning key in outside cylinder

Turning key in outside cylinder

Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch RHB-Classroom Holdback (F06)

• Rotating inside lever,

• Turning key in outside cylinder,

• O/S lever except when locked by outside key,

• Latchbolt held retracted by turning O/S key while holding up I/S lever.

N/A Turning key in outside cylinder

Turning key in outside cylinder

Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch

Jillian Lewis Rectangle

10 H E A V Y D U T Y MO R T I S E L O C K S

H S

E R

IE

S

S T A

N D

A R

D L

E V

E R

S K

N O

B

T R

IM

S 40H SERIES - STANDARD LEVERS, KNOB & TRIMS

Knob- 4 Rose - H

Knob- 4 Rose - R

Knob- 4 Rose - S

Knob- 4 Escutcheon - J

Knob- 4 Escutcheon - N

Lever- 3 Rose - H

Lever- 15 Rose - H

Lever- 3 Rose - R

Lever- 15 Rose - R

Lever- 12 Rose - H

Lever- 16 Rose - H

Lever- 12 Rose - R

Lever- 16 Rose - R

Lever- 14 Rose - H

Lever- 17 Rose - H

Lever- 14 Rose - R

Lever- 17 Rose - R

15O R T I S E L O C K S

F U

N C

T

IO

N

SFUNCTIONS

Function & Diag. Description Outside Lever or Knob Inside Knob/Lever ANSI No. Latch operated by Deadbolt operated by Locked by Unlocked by Locked by Unlocked by

Single Keyed (continued) T-Dormitory (F13) • Rotating inside lever,

• Rotating outside lever—only when deadbolt is retracted

• Turning key in out side cylinder.

• Turning key in out-side cylinder,

• Inside turn lever,

• Inside lever retracts deadbolt and latch simultaneously.

• Turning key in outside cylinder,

• Turning inside turn lever.

• Turning key in outside cylinder,

• Turning inside turn lever.

• Rotating inside lever.

Cannot be unlocked Always unlocked

TA- Dormitory (F12) • Rotating inside lever,

• Rotating O/S lever only when locking toggle is in unlocked position and deadbolt is retracted,

• Turning key in outside cylinder.

• Turning key in outside cylinder,

• Turning inside turn lever. (Rotating inside lever retracts deadbolt and latch simultaneously.)

• Placing locking toggle in locked position,

• Projecting deadbolt by key or turn lever.

Turning key in outside cylinder and placing locking toggle in unlocked position

Cannot be locked Always unlocked

TD-Dormitory • Rotating inside lever,

• Turning key in outside cylinder.

• Turning inside turn lever,

• Rotating inside lever retracts deadbolt and latch simultaneously.),

• Turning key in out-side cylinder.

Always locked Cannot be unlocked Cannot be unlocked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch

Non-Keyed L-Privacy (F19) • Rotating inside lever,

• Rotating outside lever only when deadbolt is retracted.

• Turning the emergency key,

• Turning inside turn lever. (Rotating inside knob/lever retracts deadbolt and latch simultaneously.)

• Turning inside turn lever,

• Turning the emergency key.

• Turning inside turn lever,

• Rotating inside lever retracts latch and dead-bolt si mul-taneous ly,

• Turning the emergency key.

Cannot be locked Always unlocked

LT-Privacy • Rotating inside lever,

• Rotating outside lever only when turn knob is unlocked.

N/A • Turning inside turn lever,

• Turning the emergency key.

• Turning inside turn lever,

• Rotating inside lever,

• Turning the emergency key.

Cannot be locked Always unlocked

N-Passage (F01) Rotating inside or outside lever

N/A Cannot be locked Cannot be locked Cannot be locked Cannot be locked

NX-Exit (F31) Rotating inside lever N/A Always locked Cannot be locked Cannot be locked Always unlocked

The latchbolt is deadlocked with an auxiliary deadlatch

Side Load

Operator Access

Exterior Door Panel

Arm & Header above

6"

4"

Arm & Header above

8"

Door Panel

Door clearance (If limited use Parallel Arm)

6"

Side Load

6"

Operator Access

Arm & Header above

Door Panel Emergency break-out feature for center pivoted door panels

Operator Access

4 1/2"

Bottom Load 6"

Push Plate

(1

4)

32" (813)

Minimum

120 VAC

Required

24" (610)

Minimum

(Alternate Switch Location)

Series

4100 LE

Architect Specification Guide

Activating device to be located on each side of opening for two-way traffic as per ANSI Safety Standard A117.1

Installation and Operation

Architectural Details

Horton Automatics World Headquarters 4242 Baldwin Boulevard Corpus Christi, Texas 78405-3399 USA

Phone: 800-531-3111, 361-888-5591 Fax: 361-888-6510 www.hortondoors.com

Horton Automatics, Ltd.

United Kingdom Unit A, Hortonwood 31 Telford, Shropshire, England TF1-7YZ

Phone: 01952 670169 Fax: 01952 670181

A Division of Overhead Door Corporation A Sanwa Holdings Company

Form No. B700 ©2010 Horton Automatics Printed in U.S.A.

HD-Swing® 4100LE & EasyAccess 7100 Low Energy Operators Once the activating switch is pressed, the Series 4100LE or 7100 operator slowly opens the door and holds it open for an adjustable length of time. This creates a barrier-free doorway and gives the pedestrian time to pass through the door before it slowly closes using spring force of less than 15 pounds (67 N).

Adjustments:

Selection Guide

Electrical Requirements:

120 or 220 VAC, 50 - 60 Hz, single phase, 15 amp service.

Current draw - 3.15 amps.

• Opening speed: 3 to 6 sec. to 80° (Open check)

• Closing speed: 3 to 6 sec.

from 90° to 10° (Close Check)

• Time delay: 2 to 30 sec.

(ANSI A156.19 requires 5 sec.

minimum time delay)

Standard Single Units

Door Width Header Width

3'-0" (914) 3'-3" (991)

3'-6" (1067) 3'-9" (1143)

4'-0" (1219) 4'-3" (1295)

Standard Pair Units

Pair Width Header Width

6'-0" (1829) 6'-9" (1905)

7'-0" (2133) 7'-3" (2210)

8'-0" (2438) 8'-3" (2515)

Maximum Door Width:

4100LE 4'-6" (1524)

7100 3'-6" (1067)

Maximum Door Weight:

4100LE 700 lbs (320kg) 7100 200 lbs (91kg)

Did You Know?

Low energy operators move the door slowly at a rate considered intrinsically safe

Surface Mount Bottom Access with Out Swing Arm Assembly

Surface Mount Side Access with In Swing Arm Assembly

Surface Mount Bottom Access with In Swing Parallel Arm Assembly

Shown: EasyAccess®

Series 7100 Operator Shown: HD-Swing®

Series 4100 Operator Shown: HD-Swing®

Series 4100LE m ar ka r co n ti n u o u s p in a n d ba rr el h in g es

800-824-3018 | www.pemko.com

Copyright © 2015, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

Markar HG305 Adjustable Hinge Guard

The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and aesthetic appearance. Our HG products also have fire ratings up to and including 3 hours. Not only that, but the wrap-around edge guard protects the door from unsightly dents and gouges and will deflect objects, preventing further damage.

Standard Features

Optional Features

Barrel Type Hinge .187" diameter Stainless Steel pin (rod) Medical bearings Stainless Steel end pins Material Heavy-duty 14 gauge Stainless Steel Finishes US32D Satin Stainless Steel (630) Standards ANSI/BHMA Standard A156.26 Grade 1 Mounting Hardware Fasteners concealed when door is closed Custom 12-24 x 11/16" S.S Phillips Flat Head Undercut TEK Screws

Finish US32 Bright Stainless Steel (629) Scratch-Resistant Powder Coated Paint Fasteners Adjust-A-Screw™ for correcting frame fit problems up to 3/8"

Capacity Supports weights up to 600 lbs.

4'0" maximum door width Standard Sizes 6'8", 7'0", 7'2", 8'0", 10'0" Hole Pattern Symmetrically templated Handing Not required for standard 7'0", 8'0" or 10'0". Handing required for 6'8" and 7'2" and for most optional features listed

Other Features Custom lengths- specify in inches Custom hole pattern Dutch door hinges- suffix “DDP” Hospital tips – suffix “HT” Raised barrel – suffix "RB" Welded end pins Security studs

Fire Rating 3 hours- hollow metal doors 90 minutes- hollow metal and composite 20 minutes- wood doors Classified in accordance with UL10C for positive pressure

Fire-rated label Windstorm Products is constructed in accordance with Guidelines FEMA

320 & FEMA 361.

Electrical Modifications Adjustable Monitoring Switch - suffix “AMS” Current Transfer Prep - suffix “CTP” Electrical Transfer Access Prep - suffix "ETAP" ElectroLynx® EL4 (4 wire), EL8 (8 wire), EL12 (12 wire)

Door Closed Door Open 180° Markar

Fax: 800 243-3656

Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 www.markar.com

OPEN 180°

1 15/16

13/16

CLOSED

1 3/4

3/4

1/16

1/2

(NON-ADJUSTABLE)

MIN. HINGE

CLEARANCE

3/4

5/16

1/2

3/4

3/8

ADJUSTABLE HINGE GUARD, STAINLESS STEEL, 14 GA.

HG305 CATALOG DRAWING

07/15/2014 ERev.

EH-2

800-346-7707 | www.assaabloydooraccessories.us Check the web site for the up-to-date catalog

McKinney is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.

Copyright © 2012-2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

El ec tr if ie d

H in ge s

Standard ElectroLynx® Retrofit Cable Sizes

Actual Cable Length

12 Conductor and Molex both ends

12 Conductor and Molex one end, pinned one end Typical Application

3" QC-C003 QC-C003P

Between hinge and the end of an exit device.6" QC-C006 QC-C006P

12" QC-C012 QC-C012P

26" QC-C200 QC-C200P

Between hinge and through the door to the lockset or exit device trim.

32" QC-C206 QC-C206P

38" QC-C300 QC-C300P

44" QC-C306 QC-C306P

50" QC-C400 QC-C400P

15' 2" QC-C1500 QC-C1500P From the hinge location, up the jamb to above the ceiling, or up and around full lite or half lite metal door.

25' - QC-C2500P

30' - QC-C3000P

Custom lengths available.

ElectroLynx® Retrofit Cables If you are not ordering ASSA ABLOY Door Group doors with the ElectroLynx® cable pre-installed in the door, you must order an ElectroLynx® retrofit cable to go between ANY hardware and the hinge. This includes 3" cables to go from the hinge to an exit device and up to a 15' cable to go up and around a full lite metal door.

QC-C1500P Shown

Jillian Lewis Rectangle

Copyright © 2015, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

A

ST

R

AG

AL

S A

N D

M

EE

TI

N

G

ST

IL

ES

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog door edge door face

1 4 (6.4)

1 4 (6.4)

(20.6)316_S

AVAILABLE FINISHES:

A, BDG, D, G

REPLACEMENT INSERT:

S3 (BL, W)

ANSI: R3E734, R3E735

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) Special finishes available upon request

18061_NB

AVAILABLE FINISHES:

C, D, G, SN

REPLACEMENT INSERT:

P516062 (BL, GR, W)

ANSI: R3A734

NOTE: Brush should mesh from 1/32" to 1/16".

18041_NB

AVAILABLE FINISHES:

C, D, G, SN

REPLACEMENT INSERT:

P516041 (BL, GR)

ANSI: R3A734

NOTE: Brush should mesh from 1/32" to 1/16".

Alternate Inserts For 316

Alternate Inserts For 18041

316_PK

AVAILABLE FINISHES:

A, BDG, D, G

REPLACEMENT INSERT:

PK47 (BL, GR)

ANSI: R3G734, R3G735

316_V

AVAILABLE FINISHES:

A, BDG, D, G

REPLACEMENT INSERT:

EV47 (BL, GR, W)

18041_SB

AVAILABLE FINISHES:

C, D, G, SN

REPLACEMENT INSERT:

P3 (BL, GR)

Astragal and Meeting Stile Gasketing - Split Astragals (Cont.)

318_V

AVAILABLE FINISHES:

A, BDG, D, G, PW

REPLACEMENT INSERT:

EV58 (BL, GR)

310_*

311CIN

AVAILABLE FINISHES:

C

• Material required for one pair of doors:

4 ea. 310 bars and 2 ea. 311CIN cloth inserted rubber pieces

- Specify 311CIN3.75 for 13/4"thick doors

- Specify 311CIN4.00 for 2" thick doors

- Specify 311CIN4.25 for 21/4"thick doors

* Sold individually

Jillian Lewis Rectangle

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

A

ST

R

AG

AL

S A

N D

M

EE

TI

N

G

ST

IL

ES

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

375_R

AVAILABLE FINISHES: B, C, D, G

REPLACEMENT INSERT: R4 (BL)

ANSI: R3C634, R3C635

352_R

AVAILABLE FINISHES: C, D, G

REPLACEMENT INSERT: R8 (BL)

For reverse bevel doors

“T” and Overlapping Astragals 355_S

AVAILABLE FINISHES:

B, BDG, C, D, G, PW, SN

REPLACEMENT INSERT:

S4 (BL, GR)

356_V

AVAILABLE FINISHES:

A, BDG, D, PW, SN

REPLACEMENT INSERT:

EV17 (BL, GR, W)

• Countersink drilling with countersunk flathead screws also available upon request at no extra charge

359_

AVAILABLE FINISHES:

A, BDG, D

• Supplied with weatherstrip nails for installation

357_

357_ND

AVAILABLE FINISHES:

C, D, G, SP, SS (#4 Finish & #4 Edge)

11 GAUGE

• “ND” denotes “no drill” (unless specified “ND”, astragals are drilled)

• Standard fastener is #10 x 1" Truss

Head SMS

• Lead-line option available

357_ with S88

AVAILABLE FINISHES:

SP, SS (#4 Finish & #4 Edge)

11 GAUGE

• Standard fastener is #10 x 1" Truss Head SMS

• 1/4" - 20 machine screws and thru-bolts must be ordered separately at additional cost

• S88 seal must be ordered separately at an additional cost, if required

• If specifications state that an astragal is required to satisfy a fire and / or smoke opening, then a thru-bolted 357SP or SS in conjunction with S88 seal is the only configuration that can be used.

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) SP (Galvannealed Steel) SS (See Individual Part) Special finishes available upon request

355_ V

AVAILABLE FIN-

ISHES:

B, BDG, C, D, G,

PW, SN

REPLACEMENT

INSERT:

EV7 (BL, GR, W)

355_ P

AVAILABLE

FINISHES:

B, BDG, C, D, G,

PW, SN

REPLACEMENT

INSERT:

P2 (BL, GR)

Alternate Inserts For 355 standard fastener with optional fastener and optional S88

Jillian Lewis Rectangle

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

PE

RI

M

ET

ER

G

A

SK

ET

IN

G

Magnetic Kerf-In Weatherstrip

MAG349_

AVAILABLE FINISHES: D, W

AVAILABLE LENGTHS: 37", 85", 96", 121"

• Minimum space between the door face and the stop is 3/8"; maximum space is 7/16"

• Magnetic kerf-in weatherstrip features a magnetic strip encased by a UV-stable TPE cover

• Use for steel-faced door and wood frame applications

• Can be trimmed in the field and corner-mitered

P50_

AVAILABLE FINISHES: BL, W

AVAILABLE LENGTHS: 17', 25', 250'

• Minimum space between the door face and the stop is 1/16"; maximum space is 5/16".

• Thermoplastic elastomer formulation will not transmigrate; remains flexible to -60° F

Kerf-In Weatherstrip (Cont.)

PK52_

AVAILABLE FINISHES: BL, W

ANSI: R0G154

AVAILABLE LENGTHS: 18', 20', 300'

• Minimum space between the door face and the stop is 1/16"; maximum space is 3/8"

2815_M

AVAILABLE FINISHES: C, D, G

REPLACEMENT INSERT: 2815MAG

Adhesive Perimeter Gasketing For more information on these perimeter gasketing products, please see the Adhesive Gasketing section.

S773_

AVAILABLE FINISHES: BL, D, GR, W

AVAILABLE LENGTHS: 17', 18', 20', 21', 25',

30', 250', 500'

ANSI: R0E154, R0E155

• Triple-fin design blocks light and sound from infiltrating a room

• Product designed as hospitality gasketing

(see more hospitality products in the Hospitality Products section)

• Seal begins compressing at 3/8";

compresses to seal up to a 1/16" gap

S88_

AVAILABLE FINISHES: BL, C, D, GR, TAN, W

AVAILABLE LENGTHS: 17', 18', 20', 21', 25',

30', 204', 510'

ANSI: R0E154, R0E155

• Seal begins compressing at 1/4";

compresses to seal up to a 1/16" gap

• Available with perforations for

Behavioral Health applications.

Substitute “P” in place of “S” to order this option.

S44_

AVAILABLE FINISHES: BL, C, D, GR, W

AVAILABLE LENGTHS: 17', 18', 20', 21', 25',

30', 204', 510'

ANSI: R0E154, R0E155

• Designed for tighter frames.

• Demonstrates extremely low closing force.

• Seal begins compressing at 5/16";

compresses to seal up to a 1/16" gap

• Available with perforations for

Behavioral Health applications.

Substitute “P” in place of “S” to order this option.

NOTE: Products shown in this section may not be drawn to scale.

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) Adhesive Gasketing Colors: BL (Black) C (Clear) D (Dark Brown) GR (Light Gray) TAN (Tan) W (White)

Jillian Lewis Rectangle

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. D1

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog w al l s to ps

No. Bumper Fastener Size Projection Weight ANSI A156.16

400 Convex #6 x 11/2" FH SMS, plastic toggle 27/16" dia. 1" 3.3 lbs./10 L02101

401 Convex #8 x 1" RH WS, plastic anchor 27/16" dia. 1" 3.3 lbs./10 L02101

402 Convex #8 - 32 x 1" TH MS, lead anchor 27/16" dia. 1" 3.3 lbs./10 L02101

No. Bumper Fastener Size Projection Weight ANSI A156.16

403 Concave #6 - 11/2" FH SMS, plastic toggle 27/16" dia. 1" 3.3 lbs./10 L02251

404 Concave #8 x 1" RH WS, plastic anchor 27/16" dia. 1" 3.3 lbs./10 L02251

405 Concave #8 - 32 x 1" TH MS, lead anchor 27/16" dia. 1" 3.3 lbs./10 L02251

Solid Cast Wall Stops No. 400, 401, 402 Material: Cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: Concealed mounting, convex bumper. Back plate prevents damage to wall

Solid Cast Wall Stops No. 403, 404, 405 Material: Cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: Concealed mounting, concave bumper. Back plate prevents damage to wall

Wrought Wall Stops No. 406 Material: Wrought brass, bronze, and stainless steel with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: • Concealed mounting, convex bumper. Back plate prevents damage to wall

• Accepted by the New York State Office of Mental Health (OMH) for use in high risk areas

Wrought Wall Stops No. 409 Material: Wrought brass, bronze, and stainless steel with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: • Concealed mounting, concave bumper. Back plate prevents damage to wall

• Accepted by the New York State Office of Mental Health (OMH) for use in high risk area

Options: DuraFlex bumper available in standard gray or optional black

No. Bumper Fastener Size Projection Weight ANSI A156.16

406 Convex #8 x 11/4" TH SMS, plastic toggle 21/2" dia. 3/4" 1.8 lbs./10 L02101

No. Bumper Fastener Size Projection Weight ANSI A156.16

409 Concave #8 x 11/4" TH SMS, plastic toggle 21/2" dia. 3/4" 1.8 lbs./10 L02251

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. E4

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog fl u sh bo lt s, st ri ke s a n d c o o rd in at o rs

No. Size Projection Weight ANSI A156.3

576 1" x 57/16" 7" 2.2 lbs. Type 21

Gravity Door Coordinator No. 576 Material: Cast brass

Finishes: Available in standard architectural finishes (see page 9).

Fastener: Body: 2 ea. #10 x 1" FH SMS, 2 ea. #10 - 24 x 1" FH MS Strike: 5 ea. #8 x 1" FH SMS

Other: • For use on door sizes:

- with Astragal on active door – 18" to 48"

- with Astragal on inactive door – 18" to 34"

- with Astragal on both doors – 18" to 30"

• The overlap of the astragal is maximum 7/8" with door hung on standard hinges. Customer must contact the factory for all other astragal situations

Features: Non-handed reversible. Prevents the active door from closing until the inactive door is closed

No. Size Weight ANSI A156.16

570 Face plate: 13/8" x 27/8" Barrel: 7/8" dia. x 2" depth

0.4 lbs. L04021

Dust Proof Strike No. 570 Material: Brass

Finishes: Available in standard architectural finishes (see page 9)

Fastener: Adjustment nut Spanner wrench 2 ea. #8 x 1 OH SMS, 2 ea. plastic anchors 2 ea. #8 - 32 x 3/4" OH MS, 2 ea. lead anchors

Features: • Works with all Rockwood manual and automatic flush bolts

• Removable face plate for use with thresholds

• Adjustable height for carpeted areas

No. Size Weight

557 x 19BFB Top bolt: 1" x 63/4" Bottom bolt: 13/16" dia.

0.9 lbs.

Lever Extension Flush Bolt With Bottom Fire Bolt No. 557 x 19BFB Material: Flush bolt – brass

Bottom fire bolt – stainless steel

Finishes: Available in standard architectural finishes (see page 9)

Fastener: 7 ea. #8 x 3/4" FH combo screws 4 ea. #8 - 32 x 1/2" FH MS 4 ea. #8 counter sunk washer

Features: • For Fire Rated Plastic & Wood Covered Fire Doors measuring up to 4'w x 9'h rated up to 20 minutes

• 3/4" bolt throw, 3/4" backset; door strength maintained by corner reinforcing plate

• When door is subjected to 230˚F the plug and black plastic cover will melt allowing the bolt to project, locking the leaves together

• Bottom fire bolt eliminates need for floor prep

• Oversize fire bolt strike hole allows for slight door misalignment

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. E12

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog se ri es d o o r co o rd in at o rs

Door Coordinators No. 2600 Series Material: Steel

Finishes: Black prime coat, silver powder coat

Fastener: 7 ea. #12 - 24 x 11/4 TH type C tapping screws

Size: Standard device size 5/8" x 15/8" x 52"

Features: Non-handed. Override protection to prevent damage in case of abnormal force on door Mechanism and filler bar completely fill width of opening and when painted to match frame it becomes virtually invisible

Options: Specify make and model of exit device for vertical rod preparation

Ordering: Stock Sizes

No. Opening Weight ANSI A156.3

2660 60" 7.0 lbs. Type 21A

2672 72" 8.0 lbs. Type 21A

2696 96" 9.75 lbs. Type 21A

Custom Sizes — The 2600 Series coordinators are manufactured in different housing lengths to coordinate the full range of door sizes:

• NX2600 Series: For jamb opening widths (A + B dimension) from 48" - 54". E dimension, 42"

• 2600 Series: For jamb opening widths (A + B dimension) from 54" - 96". E dimension, 52" Determining Coordinator Item Number

• Active door widths A plus inactive door width B equals the last two or three digits of all 2600 Series coordinator item numbers (2680 is for 80" door opening)

• Less than 48" jamb widths = N2600 Series (N2644 = 44" opening).

• Larger sizes are available (XL, XXL). Contact the factory

No. Jamb Widths Coordinator Length ANSI A156.3

NX2648- NX2654 48"-54" 42" Type 21A

2655 - 2660 55" - 60" 52" Type 21A

2661 - 2672 61" - 72" 52" Type 21A

2673 - 2696 73" - 96" 52" Type 21A

Fillers are usually supplied precut from the factory (filler bars shown on page E14).

NOTE: If “S” dimension is other than 5/8" advise the factory.

NOTE: Some panic hardware requires the coordinator to be factory prepped. Contact factory.

Active door holding lever with adjustable tension

Filler piece

Preparation for head jamb latch bolts

Inactive door trigger

No. 2601AB mounting bracket

No. 2601C mounting bracket

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. E14

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog au to m at ic c o m bi n at io n fl u sh bo lt s

Automatic Flush Bolts No. 2840 (Automatic Top Bolt Only) No. 2842 (Set) (replaces the No. 1840 and No. 1842) Material: Brass, stainless steel

Finishes: US3, US4, US10, US10B, US26, US26D, US32D

Fastener: No. 2842: 20 ea. #8 x 3/4" FH combo screws, 2 ea. #6 - 8 plastic anchors No. 2840: 10 ea. #8 x 3/4" FH combo screws. NOTE: No plastic anchor required for top only

Features: • For Fire Rated Metal Doors labeled A, B, C, D & E up to 4'w x 8'h

• Non-handed

• Fully automatic– opening active door retracts top and bottom bolts

• Override feature prevents damage to doors or bolts if bolt heads are blocked from entering strikes

• Bolt head rods are adjustable up to 11/2"

• Thermal lock automatically locks the inactive door under high heat conditions due to fire

Options: No. 2842 can be used with the No. 570 Dust Proof Strike (shown on page E4).

No. Size Weight ANSI A156.3

2840 1" x 63/4" 1.2 lbs. Type 25

2842 1" x 63/4" 2.4 lbs. Type 25

Combination Flush Bolts No. 2805 (Self Latching Top Bolt Only) No. 2845 (Set) (replaces No. 1805 and No. 1845) Material: Brass, stainless steel

Finishes: US3, US4, US10, US10B, US26, US26D, US32D

Fastener: Top: 8 ea. #8 x 3/4" FH combo screws. NOTE: No plastic anchor required for top only.

Bottom (No. 2845 only) 18 ea. #8 x 3/4" FH combo screws, 2 ea. #6 - 8 plastic anchors.

Features: • For Fire Rated Metal Doors labeled A, B, C, D & E up to 4'w x 8'h Top Bolt

• Automatically engages when the inactive door closes. When the active door is opened, the inactive door stays latched at the top until the top bolt is released by pressing the plunger button on the bolt face

Bottom Bolt (No. 2845 only)

• Non-handed

• Fully automatic — opening active door retracts bottom bolt

• Override feature prevents damage to door or bolt if bolt head is blocked from entering strike

• Bolt head rod is adjustable up to 11/2"

• Thermal lock automatically locks the inactive door under high heat conditions due to fire

Options: No. 2845 can be used with the No. 570 Dust Proof Strike (shown on page E4)

No. Size Weight ANSI A156.3

2805 1" x 63/4" 1.2 lbs. Type 27

2845 1" x 63/4" 2.4 lbs. Type 27

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. E13

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog d o o r co o rd in at o rs

Filler Bar for No. 1600 /2600 Series Coordinator No. FB-1, FB-2 Material: Steel

Finishes: Black prime coat, silver powder coat

Features: Filler bar is supplied at no charge with the No. 1600 and 2600 Series coordinator (shown on pages E12 & E13)

No. Size

FB-1 Specify length from 15/8" to 185/8"

FB-2 Specify length from 195/8" to 425/8"

Contact factory for larger sizes.

Mounting Brackets (for Soffit Applied Hardware) No. 2601AB, 2601C Material: Aluminum

Finishes: Black prime coat, silver powder coat

Fastener: 4 ea. 1/4 - 20 x 1/2" FH MS, 4 ea. #12 - 24 x 2" FH MS.

Features: Used for stop applied hardware. Prevents the inaverdent disabling of the coordinator by fasteners passing through the housing

No. Soffit Size Length Weight

2601AB 7/8" - 21/4" 5" 0.9 lbs.

2601C Over 21/4" 5" 0.8 lbs.

Universal Door Coordinator No. 1700 Material: Steel

Finishes: Black prime coat, silver powder coat

Fastener: 4 ea. 10-24 x 2" flat head machine screws and #10 x 2" sheet metal screws

Features: For pairs of doors up to 8' wide. Non-handed. Stop mounted – no mounting brackets required for stop mounted hardware

No. Overall Size Weight ANSI A156.3

1700 11/2" x 259/16 " x 3/4" 2.65 lbs. Type 21B

Carry Bar for No. 1600 /2600 Series Coordinator No. 1100 Material: Brass, steel

Finishes: US3, US4, US10, US10B, US26, US26D, and black prime coat

Fastener: 2 ea. 1/4 - 20 x 1 RH MS, 2 ea. 1/4 - 20 x 111/16 sex bolts

Other: A carry bar is used when it is possible to open the inactive door before opening the active door

No. Size Weight

1100 13/4" x 21/4" 0.3 lbs.

2601C

2601AB

NOTE: Not for use with surface vertical panic devices.

Copyright © 2012-2015, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. E10

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog d o o r g u ar d s & si le n ce rs

Door Silencers No. 608, 609 Material: DuraFlex gray rubber

Other: Sold in packages of 100

No. Size Frame Type Weight ANSI A156.16

608 1/2" dia. x5/8" Metal 1.3 lbs./500 L03011

609 3/8" x 3/4" Wood 1.3 lbs./500 L03021

Door Silencer No. 608CA Material: Clear rubber

Other: Sold in packages of 300

Features: Self-adhesive mounting

No. Fastener Size Weight

608CA 3/8" dia. x 1/8" Metal or wood 0.2 lbs./300

Wall Guard No. 606 Material: Clear rubber

Other: Sold in sheets of 55

Features: Self-adhesive mounting

No. Fastener Size Weight

606 Self-adhesive back 1" x 1" 0.4 lbs./55

Privacy Door Latch No. PDL (formerly 607) Material: Zinc die cast

Finishes: BRS, DBRS, STNN, CRM, DCRM, ORB

Features: • ADA compliant

• Enhanced in room privacy

• Easy to install

• For use with UL Classified fire doors for use with hollow metal steel composite type fire doors rated up to and including 3 hrs Wood composite type fire doors rated up to and including 11/2 hrs and 20 minutes without hose stream

No. Fastener Size Weight

PDL #12 x 11/4" FH SMS 11/2 " x 213/16" 0.75 lbs.

Metal Door Plate – Economy Duty No. K1038 Material: .038" aluminum, stainless steel Finishes: US32D Fastener: #6 x 5/8" OH SMS Ordering: Specify height x width x finish code. Add any options Weight: 8" x 34" = 3.2 lbs Options: • SA – self-adhesive mounting

• TORX – security Torx screws

• TEK – self-drilling screws

• Cutouts for locks, louvers, or windows (see worksheets on pages C14-C15 for details on how to order)

Windstorm Plate – K1050WS Material: 050" Aluminium, Brass, Bronze, Stainless Steel Finishes: Standard Architectural Finishes Fastener: #10x5/8" Pan Head Tek Screws Ordering: Part # when ordering is K1050WS

All plates are UL and Windstorm rated Options: • Cutouts for locks, louvers or windows

• Rounded Corners

• Heavy Bevel

• Screw Mount only

Certified to the below standards:

- ICC-500 (2014)

- FEMA Guideline 320 (2014)

- FEMA Guideline 361 (2015)

Part of windstorm assembly cards: ZHLA.45, ZHLA.46, ZHLA.47, ZHLA.51, ZHLA.53, ZHLA.54

Armor Plate Up to 48" h x 48" w and available in most finishes

Kick Plate 6" to 12" h x 48" w

Mop Plate Up to 6" h x 48" w

Stretcher Plate 6" to 12" h and up to 48" w

Metal Door Plate – Standard Duty No. K1050, K1050F Material: .050" aluminum, brass, bronze, stainless steel Finishes: US10BE, US32D,…