A1-01_PARTIAL DEMOLITION PLANS.pdf

A

0.8

A.2A.1 A.8

0.7

D03D04

D05

D05D05

D05D05

D09

D09

D06D06

D10

D09

D11

D12

D10

D15

AREA N.I.C.

AREA N.I.C.

D01D01

A8-01

EX-1B610.B

EX-1B650.A

1. CONTRACTOR SHALL COORDINATE DEMOLITION WITH OWNER; SALVAGE

AND TURN OVER TO OWNER DOORS, HARDWARE, TOILET ACCESSORIES,

CURTAIN TRACKS, LIGHT FIXTURES AND OTHER ITEMS DESIGNATED BY

OWNER. DELIVER TO OWNER ALL ITEMS AS NOTED.

2. DISPOSITION OF MECHANICAL, PLUMBING, GAS, AIR, VAC. PIPING, FIRE

PROTECTION AND ELECTRICAL ITEMS ENCOUNTERED IN AREAS TO BE

DEMOLISHED ARE DESCRIBED IN RESPECTIVE DRAWINGS AND

SPECIFICATIONS. CONTRACTOR SHALL COORDINATE WORK WITH ALL

TRADES.

3. WALLS, DOORS, FIXTURES, ETC. TO BE REMOVED ARE SHOWN DASHED.

SELECTED ITEMS ARE LABELED TO IDENTIFY THE ITEM TO BE REMOVED.

4. LOOSE EQUIPMENT OR FURNITURE NOT IDENTIFIED FOR REMOVAL, RE-USE

OR RELOCATION IS TO BE TURNED OVER TO OWNER.

5. INSTALL SECURE TEMPORARY DUST PARTITIONS TO SEPARATE

DEMOLITION & CONSTRUCTION AREAS FROM OCCUPIED SPACE.

6. REFER TO STRUCTURAL, MECHANICAL AND ELECTRICAL DRAWINGS FOR

ADDITIONAL DEMOLITION ITEMS AND REQUIREMENTS.

7. REMOVE EXISTING FLOOR AND BASE MATERIALS IN AREAS SCHEDULED TO

RECEIVE NEW FLOORING, PREP EXISTING FLOOR TO RECEIVE NEW FINISH.

8. REMOVE EXISTING CEILING MATERIALS AND SUPPORT SYSTEM IN AREAS

SCHEDULED TO RECEIVE NEW CEILING.

9. DEMOLITION CONTRACTOR TO VERIFY LOCATION OF ALL UNDERGROUND

UTILITIES. NOTIFY OWNER AND ARCHITECT OF ANY DISCREPANCIES.

10. REMOVE ALL DEBRIS, RUBBISH, AND OTHER MATERIALS RESULTING FROM

DEMOLITION OPERATIONS IN ACCORDANCE WITH LOCAL, STATE, AND

FEDERAL LAWS FROM THE PROJECT SITE. BURNING OF REMOVED

MATERIALS IS NOT PERMITTED ON PROJECT SITE.

11. COORDINATE WITH OWNER FOR SHUTOFF, CAPPING AND CONTINUATION

OF UTILITY SERVICES AS REQUIRED. DO NOT INTERRUPT EXISTING

UTILITIES SERVING OCCUPIED OR FACILITIES USED.

12. MAKE PORTABLE FIRE EXTINGUISHER AVAILABLE DURING DEMOLITION

PROCESS.

13. USE OF EXPLOSIVES IS NOT PERMITTED.

14. COMPLY WITH ALL GOVERNING REGULATIONS PERTAINING TO

ENVIRONMENTAL PROTECTION (FEDERAL, STATE AND LOCAL).

15. CONTRACTOR TO PATCH AND REPAIR ALL EXISTING FIREPROOFING DURING

INSTALLATION OF NEW WORK AS REQUIRED TO MAINTAIN REQUIRED FIRE

RATING. CONTRACTOR TO USE MATERIALS COMPATIBLE WITH EXISTING

FIREPROOFING FOR PATCH WORK.

16. FIRE CALKING NEEDS TO BE COMPLETED WITHIN 24 HOURS OF MAKING THE

PENETRATION.

A

0.8

A.2A.1 A.8

0.7

D02D02

D13D13

D14 AREA N.I.C.

AREA N.I.C.

VA FORM 08 - 6231

F

E

D

C

B

A

987654321 10

F

E

D

C

B

A

987654321 10

BID AND CONSTRUCTION

Project Number

Building Number

Drawing Number

VA Building

Project Title

Location

Issued Date Checked Drawn

Drawing Title

Approved: Project Director

Phase

FULLY SPRINKLERED

Office of Construction and Facilities Management

STAMPARCHITECT / ENGINEER OF RECORDCONSULTANT

NORTH

ARCHITECTURAL PROJECT

# 18910

KEY PLAN

FARID MEHR, PE

7850 Freeway Circle Cleveland, OH 44130

440.243.2000 cblhdesign.com

/8

/2

:0

:5

P

M C

R e v it L o c a l\

R

V

A C o lu m b u s C o n s tr u c te d B io m e d C e n tr a l_ ls m o lin s k i4

M

W H

. r v t

A1-01

757-20-206

JVV LS

CONSTRUCT BIOMED SPACE

03/26/2021

420 N. JAMES ROAD, COLUMBUS, OH 43219

PARTIAL DEMOLITION PLANS

SCALE: 1/8" = 1'-0"A1-01

1 FIRST FLOOR - DEMOLITION PLAN

DEMOLITION GENERAL NOTES

DEMOLITION KEYNOTES

TAG NOTE

D01 INSTALL TEMPORARY PARTITION AND DOOR(S) FOR EXISTING

CORRIDOR WORK. MAINTAIN MINIMUM WIDTH OF 6'-0" EGRESS PATH IN

CORRIDOR. REMOVE PARTITIONS AT COMPLETION OF WORK, PATCH

AND MATCH EXISTING AND NEW FINISHES AS REQUIRED.

D02 REMOVE EXISTING INTERIOR CEILING, INCLUDING CEILING

SUSPENSION SYSTEM, GYPSUM BOARD SOFFITS, AND ALL

ASSOCIATED ITEMS, CUBICLE CEILING TRACKS, LIGHT FIXTURES AND

DIFFUSERS, ETC. COORDINATE WITH MECHANICAL, ELECTRICAL AND

PLUMBING DRAWINGS.

D03 REMOVE EXISTING MASONRY WALL, REINFORCEMENT AND ALL

ATTACHMENTS.

D04 REMOVE EXISTING DOOR, FRAME, HARDWARE AND FRAME

PROTECTION.

D05 REMOVE EXISTING TEMPORARY BARRIERS, DOORS, HARDWARE, AND

ALL ASSOCIATED ITEMS.

D06 EXISTING FURNITURE, FREESTANDING EQUIPMENT, AND ENTOURAGE

REMOVED BY OWNER.

D07

D09 TRENCH SLAB AS NECESSARY FOR REROUTING EXISTING

UNDERGROUND ACCESS, PIPING, ELECT. CONDUIT, ETC. COORDINATE

W/ MEP DWGS.

D10 CONCRETE CUTTING AS NECESSARY TO PREP FOR NEW FOOTER

UNDER NEW MASONRY WALL. SEE STRUCTURAL DRAWINGS.

D11 DEMO EXISTING MASONRY JAMB AS REQUIRED FOR NEW 16" BOND

BEAM LINTEL OVER OPENING, W/ (2) #6 TOP AND BOTTOM.

D12 PREP EXISTING SLAB EDGES AT PIT FOR NEW INFILL. SEE

STRUCTURAL DRAWINGS FOR DETAILS. VERIFY DIMENSIONS IN FIELD.

D13 DEMO EXISTING WALLS AS REQUIRED THROUGHOUT FOR NEW MEP

PENETRATIONS. PATCH AND MATCH EXISTING AND NEW FINISHES.

COORDINATE WITH MEP DRAWINGS.

D14 REMOVE EXISTING HALLWAY CEILING SYSTEM AS REQUIRED TO PREP

FOR NEW WALL LOCATIONS. COORDINATE WITH ARCHITECTURAL AND

MEP DRAWINGS, REPLACE EXIST. CEILING OR REPLACE WITH NEW

CEILING SYSTEM TO A "LIKE NEW" CONDITION.

D15 DEMO EXISTING SLAB AS NECESSARY TO PREP FOR NEW PLUMBING

PIPING, FLOOR DRAINS, ETC. COORDINATE WITH MEP DRAWINGS.

SCALE: 1/8" = 1'-0"A1-01

2 FIRST FLOOR - DEMOLITION REFLECTED CEILING PLAN

Revisions Date

BID AND CONSTRUCTION 03/26/2021

ADDENDUM #1 09/09/2021