36C25020B0064 0002 - Attachment.pdf

LEVIN PORTER ASSOCIATES, INC.

3011 NEWMARK DRIVE MIAMISBURG, OHIO 45342

O: 937.224.1931 F:937.224.3091 www.levin-porter.com

ADDENDUM NO. 02

August 24, 2020

VA PROJECT # 539-19-101

RECONFIGURE PRIMARY CARE TO PACT

CINCINNATI VA MEDICAL CENTER

3200 VINE ST.

CINCINNATI, OHIO 45220

LEVIN PORTER ASSOCIATES, INC

3011 NEWMARK DRIVE

DAYTON, OHIO 45342

LPA PROJECT NO. 205612.00

TO ALL BIDDERS:

This addendum including all items listed hereinafter, shall become a part of the documents, shall be taken into account in preparing the Proposal, and shall become a part of the Contract. The work under each branch shall be in accordance with the original specifications unless excepted in this Addendum.

This Addendum consists of 2 pages:

ITEM NO. 1: THE SPECIFICATIONS SHALL BE REVISED AS FOLLOWS:

1.1 Reference Section 08 71 00 DOOR HARDWARE

A. Section 1.9B revised to read

“B. Keying: All cylinders shall be keyed into existing Great Grand Master Key System. Provide removable core cylinders that are removable only with a special key or tool without disassembly of knob or lockset. Cylinders shall be 7 pin type large format interchangeable cores (LFIC).

Keying information shall be furnished at a later date by the COR.”

B. Section 2.7 revised to read

“lock cylinders shall have not less than seven pins”

C. Section 2.7 B1 revise to read :

LEVIN PORTER ASSOCIATES, INC.

3011 NEWMARK DRIVE MIAMISBURG, OHIO 45342

O: 937.224.1931 F:937.224.3091 www.levin-porter.com

Mortise Lock and Latch Sets: Conform to ANSI/BHMA A156.13. Mortise locksets shall be series 1000, minimum Grade 2. All locksets and latchsets, except on designated doors in Psychiatric (Mental Health) areas, shall have lever handles fabricated from cast stainless steel. Provide sectional (lever x rose) lever design matching Corbin Russwin. Handle to be “Newport” style. No substitute lever material shall be accepted. All locks and latchsets shall be furnished with 122.55 mm (4-7/8-inch) curved lip strike and wrought box. At outswing pairs with overlapping astragals, provide flat lip strip with 21mm (7/8-inch) lip-to-center dimension. Lock function F02 shall be furnished with emergency tools/keys for emergency entrance. All lock cases installed on lead lined doors shall be lead lined before applying final hardware finish. Furnish armored fronts for all mortise locks. Where mortise locks are installed in high-humidity locations or where exposed to the exterior on both sides of the opening, provide non-ferrous mortise lock case.

2.1 Reference SECTION 09 06 00 SCHEDULE OF FINISHES

A. Section 2.9 B SECTION 09 51 00, ACOUSTICAL CEILINGS REVISED TO READ

Finish Code

Component Color Pattern Manufacturer Mfg Name/No.

Exposed Suspension System

ACT-1 WHITE 2X2 ARMSTRONG ULTIMA PART 1910

NRC 75, CAC 35

ACT-2 WHITE 2X2 ARMSTRONG ULTIMA HEALTHZONE

PART 1445

NRC 80, CAC 35

ACT-3 GASKETED GRID WHITE 2X2 ARMSTRONG ULTIMA HEALTHZONE

PART 1445

NRC 80, CAC 35

ACT-4 WHITE 2X2 ARMSTRONG LYRA HIGH CAC

PART 8731-PB

NRC 95, CAC 42

ACT-5 9/16 GRID SUPRA

FINE

WHITE 2X2 ARMSTRONG ULTIMA HEALTHZONE

PART 1446

NRC 80 CAC 35

END OF ADDENDUM NO. 02