Technical Specifications Revised 2.pdf

Chairs, Barrier Free Exam

An ADA-compliant exam chair, Chairs, Barrier Free Exam must have a patient weight capacity of at least 650 lbs and an adjustable height range from 15.5 to 37 inches. Key features must include powered back and height adjustments, retractable transport assist rollers system, Integrated Weight Measurement System for integrated digital weighing and seamless EMR data transfer to Cerner, powered drawer and upholstery heating options. It has hospital-grade power receptacles, a paper dispenser, and accessory attachment points for various equipment.

Barrier-Free Examination Chair Specifications

• Patient Weight Capacity: at least 650 lb (295 kg).

• Height:

o Uncompressed: 15.5" Low to 37" High (39 cm to 94 cm).

o Compressed: up to 14.6" Low (36 cm).

• Length with Footrest Extended: 70" - 76" (178 cm - 193 cm)

• Pelvic Tilt: Adjustable pelvic tilt of at least 5°.

• Heated Drawer: 24.6 Watt.

• Heated Drawer Temperature: 92 to 112 °F at 115 VAC input voltage, 70 °F ambient.

• Paper Roll Holder: Holds at least 24" x 3.56" diameter paper roll (61 cm x 9 cm).

• Electrical Receptacle: Electrical Draw 4 A; Hospital-Grade electrical receptacles on left and right sides.

• Electrical Ratings: 115 VAC, 50/60 Hz, 12 A.

• Safety Standards:

o ANSI/AAMI ES60601-1:2005+A2 (R2012)+A1.

o CAN/CSA-C22.2 No. 60601-1:14.

• Upholstery Top Dimensions (Standard Top): 28" (W) x 60" (L) (71 cm x 152 cm) OR 32" (W) x 60" (L) (81 cm x 152 cm).

Features and Functionality

• Accessibility: Low seat height for easier patient transfer and compliance with ADA guidelines.

• Movement & Positioning: Powered height and backrest movements, along with pelvic tilt, for precise patient positioning.

• Upholstery & Drawer: Optional heated upholstery and a heated drawer for patient comfort during lower-body examinations.

• Controls: Choice of wired or wireless hand and foot controllers.

• Safety: Obstruction Detection technology to pause table movement when a disruption is detected.

• Cleaning: Retractable Transport Assist Rollers allows the chair to be moved easily for cleaning.

• Integrated Technology: Integrated Weight Measurement System for integrated digital weighing and seamless EMR data transfer to Cerner.

• Power & Connectivity: Hospital-grade receptacles on both sides of the chair for connecting diagnostic equipment.

• Paper Roll Holder: Holds a 24-inch paper roll for various exam needs.

Procedure Light, Wall Mount Procedure Light

LED Procedure Light must deliver superior, quality illumination that is affordable. The combination of optics enhances one's ability to see color variations in tissue and is intended to aid in a more accurate diagnosis and treatment.

LED Wall Mount Procedure Light Specifications

• Illumination: at least 39" (1 m)

• Focal length: at least 7,500 fc (80,700 lux)

• Depth of Field: at least 29.8" (75.8 cm)

• Color temperature: at least 4,400 K

• Diameter of light head: at least 20" (50.8 cm)

• LED Light Module: at least 16 LEDs arranged in 4x4 array, 32-Watt rating.

Features

• at least 7,500 footcandles - significantly more light intensity of similar products

• An exceptional color rendering index of greater than 95 (out of 100)

• A color temperature of at least 4,400 K

• Integrated controls on both sides of the light head

• Counterbalanced design requiring less force to position and help eliminate drifting https://www.hospeq.com/v/vspfiles/photos/MR255006-2.jpg?v-cache=1754860325

• Ergonomic yoke design for an expanded range of motion

Chair, Bariatric Side (with Arms), Ultra Free Harbor

Bariatric Side Chair must have at least 650 lb (294.8 kg) weight capacity, at least 18-inch seat height, and at least 30-inch wide seat with at least 2.5-inch thick cushioning. It features a durable, powder-coated steel frame with a wall-saver design, adjustable leveling feet for stability, and contoured, upholstered cushioning.

Bariatric Side Chair with Arms

• Weight Capacity: at least 650 lb (294.8 kg)

• Seat Height: at least 18 inches (45.7 cm)

• Seat Width: at least 30 inches

• Seat Depth: at least 20 inches

• Seat Cushion Thickness: at least 2.5 inches (6.4 cm)

• Back Cushion Dimensions: at least 30 inches W x 13.5 inches H

Features, Construction & Design

• Frame: Sturdy, powder-coated black steel tube frame

• Legs: Wall-saver, kickback rear leg design

• Feet: Adjustable leveling feet

• Cushioning: Contoured, upholstered seat and back

• Arms: High-impact plastic chair arms

• Stability: Designed for stability with a strong frame and leveling feet.

• Accessibility: Features a generous at least 30-inch wide seat for comfort and a wall-saving design to protect walls.

• Cleanliness: The UltraFree upholstery has a look and feel of leather, is PVC-free, and is easier to clean and disinfect, with sewn-in seams for better infection prevention.

Light, Exam LED Extended Spline Mount System

The Light, Exam LED Extended Spline Mount System must include a single LED light source with a nominal illumination of 1,700 foot-candles (18,298 lux) at a 16-inch focal length and a color temperature of 4,250-4,750 K. The light has an adjustable spot size from 4 to 12 inches in diameter, a 2-inch diameter by 5.32-inch long head, and a 54.5-inch flex arm. The electrical requirements are 110-240 VAC, 0.05-0.10 A, 50/60 Hz.

Key Specifications

• Light Source: Single LED

• Illumination: 1,700 foot-candles (18,298 lux) nominal at a 16-inch focal length

• Color Temperature: 4,250 K to 4,750 K

• Adjustable Spot Size: 4 inches to 12 inches in diameter

• Light Head: 2-inch diameter, 5.32-inch long

• Flex Arm: 54.5 inches in length

• Electrical: 110-240 VAC, 0.05-0.10 A, 50/60 Hz

• Power Cord: 8-foot Hospital Grade Plug https://www.hospeq.com/v/vspfiles/photos/MR253013-2.jpg?v-cache=1754860325

• Control Box Dimensions: 4.75 inches high, 6.75 inches wide, 2.62 inches deep

• Weight (light head/flex arm/control box): 3 lbs (1.4 kg)

Features

• Ergonomic Controls: Located on the light head for easy access and adjustment of power and focal spot.

• Durability and Ease of Cleaning: Designed for use in a medical setting.

• Energy Efficiency: Consumes significantly less energy than older LED lights.

• Long Lifespan: The LED light source can last up to 50,000 hours.

Versatile Mounting: Available in various configurations to mount to exam tables, procedure chairs, or a mobile caster stand, depending on the specific kit.

Basic Stool, Pneumatically Adjustable, Ultra free Harbor

The Pneumatic Rolling Stools must include a seat height range of approximately 18 to 24.5 inches, at least 16.25-inch seat diameter, at least a 300 lb weight capacity, at least 14-inch by 7.5-inch back cushion, and at least 23-inch diameter caster base. The stool features pneumatic height adjustment via an air lift lever, a five-leg caster base, and an ergonomic backrest for support and posture, with options for different casters or glides.

Key Specifications

• Seat Height: Adjustable from 18" to 24.5"

• Seat Diameter: at least 16.25"

• Weight Capacity: at least 300 lb

• Backrest Dimensions: at least 14" W x 7.5" H

• Caster Base Diameter: at least 23"

Features

• Height Adjustment: Pneumatic air lift controlled by a single lever or hand ring.

• Base: A durable, black composite five-leg caster base with a hood.

• Backrest: An ergonomic backrest designed to promote good posture and increase comfort.

• Casters: Dual-hooded silent casters are standard, with options available for locking or soft rubber casters.

• Options: The stool can be fitted with alternative locking casters, soft rubber casters, or glides instead of standard casters.

Procedures Table Programmable w/Receptacle w/o Top

The power procedure table with at least a 650 lb patient weight capacity, adjustable height, power-controlled back, foot, and tilt functions for versatile patient positioning, and a standard patient support surface length of 72 to 76 inches. Key features include at least a low 18-inch minimum height for barrier-free access, built-in stirrups, and optional components such as a 350° rotating base and hospital-grade electrical outlets.

Key Specifications

• Patient Weight Capacity: at least 650 lbs (295 kg)

• Height Range:

o Standard Base: 18" to 40" (45.7 cm to 101.6 cm) o Rotational Base: 21.5" to 43.5" (54.6 cm to 110.5 cm)

• Patient Support Surface Length: 72" to 76" (182.9 cm to 193 cm) in the flat position

• Power Adjustments: Height, back, foot, and tilt

• Features: Built-in stirrups, paper roll holder

• Electrical Outlets: Duplex, hospital-grade outlets on each side (available on non-rotational models)

• Rotation: 350° rotation and adds 3.5" to the height range

• Programmability: Four customizable positions for quick adjustments

• Wireless Control: Hand and foot controls for greater flexibility

• Upholstery Options: at least 28" and 32" widths, including seamless Soft Touch and PVC-free UltraFree designs

• Heated Top: Available for some models

• Patient-Synchronized Motion System: Mimics human movement, maintaining patient head and back support during position changes

• Obstruction Detection Technology: Prevents harmful impact during movement by detecting objects under the table

Key Features

• Country of Origin: USA

• Warranty: at least 90 Days

• Power height, back, foot, and tilt

• Obstruction detection sensors enhance patient and provider protection by helping to avoid harmful impact during movement

• Patient Weight Capacity: at least 650 lb https://www.google.com/search?q=Motion+Profiling&mstk=AUtExfDna9NrpOa72uS0lBLkjTwQrWE7YE_HWP19knsbcvpIPSgOl4_4XdYqf1nD_fmzROzGuJ9IcRxdAOh9H2js08xCE3-yNnNaiTVL0UZ60z1OwCmDSi8d-U8CYgXu3NK8he0NEODBNR3NUtyRxDdCfAJVQ2tLOY0JvmanESV9qBYGOUA0LykcP2kDCvk-Q8-P-1VL2I2v5P5Db2qTDGKl37edRfX8xA4VA2W9BFJuQp3TppOkDRP5Ut12etyNBkTCpFQocVLaDrQx6xDlYGhriCo3BpGLxUmj7iLRzYTy7uJnNQ&csui=3&ved=2ahUKEwjI0Lz5qZKPAxW_oq8BHQn_JgUQgK4QegQIABAg

• Patient-Synchronized Motion System moves the table with the patient during positioning to maintain head and back support, eliminating the need for patients to shift their position as the table back section raises or lowers

Mobile Cart for Digital Vital Signs Device

Mobile vital signs monitors must offer a range of technical specifications for patient monitoring. These devices typically include features for measuring blood pressure (NIBP), SpO2, temperature (using Temporal Temperature Scanner), and pulse rate. They are designed for portability with features like rechargeable batteries, wireless connectivity, and various mounting options.

Key Technical Specifications:

• Weight: around 4 lbs (1.8 kg) without the Temporal Temperature Scanner and 4.7 lbs (2.1 kg) with it.

• Dimensions: 12" L x 4" W x 8" H.

• Power: AC adapter input: 100-240V, 50-60Hz, 700mA, with a 15V/2A output. They also feature a rechargeable 10.8V lithium-ion battery.

• NIBP Method: Oscillo metric.

• Temperature: Temporal Temperature Scanner.

• SpO2: If included, uses spectrophotometric (dual wavelength) measurement.

• Display: Touchscreen, with a high-resolution color LCD display.

• Connectivity: USB (Client), and the Smart Vital Signs Module that offers wireless connectivity via Bluetooth Low Energy (BLE) for automatic connection to a computer.

• Software: Windows-based platform, with software compatible for integration with EMR systems.

• Mounting Options: Mobile cart, wall mount, countertop, and equipment pole.

• Additional Features: Integrated scale for weight capture, BMI calculation, and intuitive user interface.

• Features a touchscreen interface, Digital Pulse Oximeter Sensor, and connectivity framework for EMR integration.

• Offers wireless connectivity with automatic connection to computers via Bluetooth, eliminating the need for manual pairing.

Workstations, Standard Duty Wall Mount

• Monitor Height Adjustment: at least 9.5"

• Monitor Movement: at least 45° of tilt and 180° of rotation with the quick-connect VESA mount for portrait to landscape viewing

• Monitor Mount Weight Capacity: 5-20 lb

• Work Surface: Upper level for papers and small technology

• Compact Design: Compact wall-mount design with the tray flipped up, having a maximum folded depth of 11", perfect for high traffic areas, hallways or patient rooms

• Workstation Weight Capacity: up to 20 lb

• Workstation Tray Dimensions: at least 25" W x 10" D x 2.1" H

• Keyboard Height Adjustment: at least 22" of keyboard height adjustment

• Cable Management: Integrated wire management system in the mounting arm for neat and quick wire installation

• Wall Track: Available in at least 34" length for direct-to-drywall applications, optimizing locations with limited space

Wall Systems

The Wall System must include options for LED diagnostic instruments with CRI greater than 95 and non-invasive temporal thermometry – contributing to a more accurate diagnosis and better outcomes.

Digital Vital Signs Device w/Touchscreen BP, Temp and SpO2

• Product Type: Non-invasive, multi-parameter digital vital signs device

• Product Weight: at least 4.0 lb (1.8 kg) without Temporal Scanner, 4.7 lb (2.1 kg) with Scanner

• Product Dimensions: at least 12” L x 4” W x 7” H (0.30 x 0.10 x 0.18 m) without the Temporal Scanner, 12” L x 4” W x 8” H (0.30 x 0.10 x 0.20 m) with the

• Temporal Temperature Scanner

• Power Requirements: Input - 100 – 240 V / ~ 50 – 60 Hz / 700 mA Output: 15 V / 2 A

• Battery Requirements: Type: Rechargeable, 10.8 V lithium ion, Low Power Indicator, Automatic Shutdown on low power, Operating Time: Approximately 8 hours, Leakage current: Meets AAMI/IEC/CSA 606011 requirements, Battery charge time: 4 hours to fully charge, 3 hours for 95% charge

Patient Support Rails, receiver extension - pair (field install)

Patient Support Railes Plus (field install)

Both must be at least 15 ½” in length, 1 ¼” diameter gripping surface, 8” high and less than 1 ½” from transfer surface edge

Wall Mount for Digital Vital Signs Device