Additional Barracks Door and Lock Replacement Questions and Answers.pdf

PDF 264 KB Posted

Attached to
Barracks Door Replacement on Coast Guard Island Federal contract opportunity
Solicitation number
31090PR260000324
Issued by
Department of Homeland Security US Coast Guard

About this file

This document is a Questions and Answers section from a federal solicitation addressing door procurement and installation requirements.

The contractor is responsible for providing 47 doors in various configurations: Office Door 1 (1 unit, 79"x35.5"), Office Door 2 (1 unit, 79"x29.5"), Wing Doors (2 units, 79"x35.75"), Room Doors (42 units, 84"x35.5"), and Laundry Room Door (1 unit, 79"x35.5" with 27.5"x22" window). All measurements are approximate, and the contractor must verify exact dimensions after award and before ordering. Ceiling height throughout is 8 feet. Doors shall be provided as slabs only to fit existing frames, with an approximate thickness of 1-3/4". The contractor must finish doors to match existing conditions and outfit them with hardware including kickplates, handles, locking mechanisms, closures, windows, and peepholes as shown in reference photographs. The documents indicate that Wing Doors require handles, kick plates, and closers; Office Doors require kick plates, handles, and locking mechanisms; Room Doors require peeps, kick plates, handles, and locking mechanisms; and the Laundry Room Door requires a kick plate, handle, and window. The contractor is not responsible for painting doors, but must finish them to match existing standards. The Government plans to paint the facility and frames separately later in the year.

View the file

Other files for this federal contract opportunity

Other files attached to Barracks Door Replacement on Coast Guard Island, newest first.
File Type Posted
CGI-B024-026_Door Drawing_update.pdf PDF
Barracks Door and Lock Replacement Questions and Answers.pdf PDF
Barracks Door Replacement Solicitation.pdf PDF
BASE ACCESS FORM.xlsx XLSX spreadsheet
Statement of Work Barracks Doors.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

14. Can the Government provide the height and width of each of the 47 doors, along with the ceiling height(s) for the applicable areas?

Answer:

All measurements are approximate and contractor shall confirm exact measurements after award and before ordering the doors.

OƯice Door 1 (quantity 1): 79”x35.5” OƯice Door 2 (quantity 1): 79”x29.5” Wing Doors (quantity 2): 79”x35.75” Room Doors (quantity 42): 84”x35.5” Laundry Room (quantity 1) 79”x35.5” (w/ 27.5”x22” window)

Ceiling height 8’

15. Is the contractor responsible for providing the doors? If so, are the required doors paint-grade or finish-grade?

Answer: Yes, contractor is responsible for providing doors. Doors shall be finished to match existing as close as possible and shall be outfitted with hardware to match existing (kickplates, windows, peeps, hardware, closures etc) Pictures are attached below for reference for those who did not attend site visit.

16. Are the doors to be provided/installed as pre-hung assemblies or slab-only doors?

Answer: Contractor to provide doors. Project intent is to provide slabs to fit existing frames.

17. What thickness are the door slabs required to be — 1-3/4" or 2"?

Answer: approximate thickness 1-3/4”. Contractor to verify all dimensions prior to procurement.

18. Will a Government-provided painter/painting contractor be performing painting after the door installation, or is painting/finishing part of the contractor's scope?

Answer: Doors are not to be painted but shall be finished to match existing as part of contractor’s scope. Government has plans to paint the facility later this year and thus can paint the frames as required. See previous response for more details.

Wing Door: note handle, kick plate, closer

OƯice doors: note kick plate and handle and locking mechanism.

Room door: note peep, kick plate, handle and locking mechanism.

Interest to add door closures was noted on RFI responses.

Laundry room door: Note kickplate, handle, window.

File details come from the government source that posted it. Updated .