SF-30 Solicitaiton Modification 2.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Paul Carr, Contract Specialist

See below continuation of solicitation amendment.

Indian Health Service Nashville Area Office 711 Stewarts Ferry Pike Nashville, TN 37214

Indian Health Service Nashville Area Office 711 Stewarts Ferry Pike Nashville, TN 37214

IHS0505126

285-25-RFQ-0008

03/27/2025

12/19/2025

3/27/2025

SF-30 BLOCK 14. DESCRIPTION OF AMENDMENT/MODIFICATION CONTIUNATION PAGE

Summary of Changes:

1. Include all necessary construction efforts required for proper installation and functionality with delivery.

2. Include warranty on equipment, furniture, and construction.

3. Include salient physical, functional, or performance characteristics.

Changes:

The following shall be added to the Description of Requirement.

The Contractor shall be responsible all necessary construction efforts required for proper installation and functionality. These construction efforts shall include, but are not limited to, electrical, plumbing, mechanical, structural, and finish work necessary to integrate the supplied equipment and casework into the facility.

The contractor shall be responsible to install all supplied items to fully functional and operational status, completing all required connections to all building utilities without loss of existing functionality or quality. The contractor shall be responsible for returning rooms and building to fully functional condition at the completion of any necessary modifications performed.

Alterations required are based on the specific characteristics and requirements of supplied items as supplied by the contractor and are expected to include, but are not limited to:

Electrical Work: Install, modify or relocate power supplies, outlets, conduit, light switches, thermostats, telecommunication terminations or any other existing infrastructure in conflict with mounting locations and/or required by supplied items. Remove any redundant or unused conduit protruding from walls, make good with blank off plates. Make necessary connections to electrical panels as required to support the supplied equipment. Complete any and all electrical terminations required for proper installation and functionality of supplied items in accordance with all applicable specifications, codes and regulation.

Plumbing Work: Install, modify or relocate water supply lines, drains, vents, compressed air or vacuum lines. Install any required valves, traps or ancillary equipment not currently present but required to install. Complete any and all connections required for proper installation and functionality of supplied items in accordance with all applicable specifications, codes and regulation.

Structural Modifications: Reinforce or alter walls, floors, ceilings, or supports required for mounting, connecting or securing casework, cabinets, medical equipment.

Mounting and Anchorage: Properly secure and install all supplied equipment, casework, and cabinetry, ensuring compliance with facility design standards and load-bearing requirements as specified.

Sealing and Finishing: Apply trim, flooring, sealants, paint, or other finish work as required to achieve a completed and professional installation. Make good any alterations to surfaces in accordance with existing conditions using only materials specified in existing, base construction documents from recently completed clinic construction project.

The Contractor shall field verify all requirements. Any additional alterations, demolitions, replacements or like thereof will be approved by the COR or CO prior to action. Any deviation from the manufacturer installation requirements must be approved prior to construction.

The Contractors are encouraged to attend a site inspection/site visit as requested by the CO and COR. These meetings shall be at no additional cost to the Government. Contractors shall use the site inspection/site visit to evaluate general and specific site conditions and satisfy itself as to the general and local conditions that may affect the work or its cost, including verifying any conditions outlined in the Government’s Scope of Work (to include any associated attachments).

Contractors shall prepare and provide a comprehensive work plan, submittals and schedule. Submittals and work plan shall clearly identify the extent of any alterations required in order to install the submitted equipment, casework, cabinets etc. The comprehensive work schedule shall be submitted to the COR, who will submit it to the Engineer for approval. Any changes to the schedule are subject to approval by the Government. A copy of the approved schedule shall be maintained onsite at all times.

The contractor shall submit manufacturer’s literature, material samples, color samples, and applicable shop drawings as indicated for materials, components, and systems to be installed in reference to the solicitation.

All Manufacturer cut sheets/informational data shall be original manufacturer sheets.

The contractor shall provide a one (1) year warranty period on all installation/modification work he/she does on the job, unless otherwise noted, from the date of final acceptance of the work. If the Government takes possession of any part of the work before final acceptance, this warranty shall continue for a period of one (1) year from the date the Government takes possession. During the warranty period, the contractor shall remedy at the contractor’s expense any failure to conform, or any defect, damage, or failure of the work.

All equipment shall be accompanied by the Original Equipment Manufacturers (OEM’s) warranty.

The contractor must obtain, and maintain as current, all licenses required by State or local laws, codes, regulations, or rules. The contractor shall, upon request at any time during the term of this contract, submit to the Government evidence that it and its subcontractors hold the required licenses.

The contractor shall store all supplies and equipment on the project site so as to preclude theft or damage.

The contractor shall maintain each site in a neat and orderly manner. Protection and security for materials and equipment onsite is the sole responsibility of the contractor. The contractor may be required to install temporary fencing to protect the site.

The contractor shall be responsible for all site surveys, feasibility studies, calculations work plans, equipment startup, commissioning and testing and/or repair, warranty, minor construction work actions, and controlling the quality of supplies or services. Responsibilities shall include, but are not limited to, furnishing equipment, materials, applicable engineering and engineering documentation, all data/information requested and other necessary services and/or products required to remediate, implement, and test the alterations and minor construction work actions.

The contractor shall be responsible for identifying, notifying appropriate authorities, and obtaining all permits necessary to perform work from Federal, State, Local, or IHS Agencies. The contractor is responsible for providing any updated drawings required to perform any required alterations to install the supplied equipment, casework, cabinetry etc as specified in this solicitation. Should any permit requirements change during contract performance, the contractor shall bear the burden of any extra costs. When approved by the CO and a receipt provided by the contractor, the Government treats permits as a reimbursable task paid without markup.

The contractor shall assure all Dental Furniture and Equipment meets specifications in the statement of work, to include all salient characteristics included below the supplied items and achieve full functionality.

The “Brand Name or Equal” Salient physical, functional, or performance characteristic are as follows:

A-DEC 511 CHAIR

SELECTIONS:

• Model 511 Patient Chair

• Product Version B

• 300 Pro / 500 Pro Compatible – Yes

• Voltage: 120 Volts

• Foundation Price 511 Chair

• Upholstery Color Type – Sewn

• Upholstery Style - S02 Style

• Upholstery Color: St. John

• Contoured Floor Box

SALIENT CHARACTERISTICS:

• UL rated to 500LB. (227 kg) or more maximum patient load.

• Ultra-thin flexible back rest, measuring 1.25” thick on the seamless upholstery.

• Headrest, standard dual articulating with gliding cushion and quick release adjustment lever.

• 2-position armrests, mounted mid-thigh position, design articulates forward for patient access with durable Santoprene surface for comfort and ease of asepsis.

• Lift range 13.5”-31.5” (Note: measurements are made from the floor to the bottom of the seat cushion.)

• Chair swivels 60° (30° each side of center) for patient and operator accessibility.

• Automatic Chair-Stop reduces risk of injury or damage to equipment when sensors detect obstruction.

Lock-out feature disables chair movement when handpiece is in use.

• Integrated 300-Watt power supply provides electrical requirements for chair-mounted dental light and ancillary products.

• Accumulators in the hydraulic lift system for a soft chair start and stop. Lift cylinders guaranteed for ten years.

• Self-diagnosing circuit board that is easily programmable, with “limp-along” lift activation.

• Bi-directional hydraulic motor pump is compact and requires fewer service parts. Cast iron base-plate, powder coat painted and sealed with an elastomeric polymer finish to prevent rust and scratch damage to the floor.

• Vacuum-formed seamless upholstery is constructed of 40 ounces per yard/67-gauge superior grade vinyl.

• Virtual-Pivot design aligns the natural spine rotation of the seated patient with the chair’s rotational axis.

This unique design feature maintains patient position and comfort throughout the chair’s entire range of motion.

A-DEC 521 DOCTOR'S STOOL

SELECTIONS:

• Model 521 Doctor’s Stool

• Foundation Price 521 Doctors Stool

• Cylinder Type – Tall

• Caster Type – Tile

• Armrest Options – Armrests

• Upholstery Color Type – Sewn

• Upholstery Color - St. John

• Dynamic seat armature has three layers of flexible seating; cushion foam, comfort-flex armature, and flex frame. The seat provides an extra 8 degrees of forward tilt in the thigh zone.

• Adjustable seat tilt feature for enhanced ergonomic positioning provides 4 degrees forward and 4 degrees backward tilt.

• Distributes weight from seat to feet allowing proper circulation.

• Contoured backrest with one-handed push button height control and adjustable backrest tilt.

• Four Points of Adjustability: Seat tilt, seat height, backrest tilt, and backrest height.

• Two seat height range available: Tall range 19.6" to 24.1" (498mm - 612mm) or standard range 16.4” to

21.7” (417mm – 551mm).

• Integral gas cylinder for height adjustment.

• Akulon base with five casters that provide movement on both carpet and hard flooring surfaces. Stool is rated for 350lb.

• Sewn upholstery with minimal seams, available in 30 standard color choices.

• Easy-to-clean adjustment paddles, numbered for easy identification and control.

• Durable Powder Coat finish.

• Pivoting, swing-out armrests that have height adjustment, width adjustment, fore/aft adjustment and a soft Santoprene top surface.

• Material is 100% Polyurethane Surface with 100% reinforced Rayon backing. Weight is 9.7 oz. per square yard.

A-DEC 522 ASSISTANT'S STOOL

• Model 522 Assistant’s Stool

• Foundation Price 522 Assistant’s Stool

• Foot Support – Foot Ring

• Backrest – No backrest

• Caster Type – Tile

• Upholstery Color Type – Sewn

• Upholstery Color – St. John

• Dynamic seat armature has three layers of flexible seating; cushion foam, comfort-flex armature, and flex frame. The seat provides an extra 8 degrees of forward tilt in the thigh zone.

• Adjustable seat tilt feature for enhanced ergonomic positioning provides 4 degrees forward and 4 degrees backward tilt.

• Distributes weight from seat to feet allowing proper circulation.

• Four Points of Adjustability: Seat tilt, seat height, backrest tilt, and backrest height.

• Seat height range: 23.1" to 28.7" (578 mm-729 mm).

• Integral gas cylinder for height adjustment.

• Akulon base with five casters that provide movement on both carpet and hard flooring surfaces. Stool is rated for 350lb.

• Sewn upholstery with minimal seams.

• Easy-to-clean adjustment paddles, numbered for easy identification and control.

• Height-adjustable foot ring.

• Height-adjustable contoured torso support convertible for left- or right-hand operators.

• Durable Powder Coat finish.

• Sewn upholstery material is 100% Polyurethane Surface with 100% reinforced Rayon backing. Weight is 9.7

oz. per square yard.

A-DEC 532 TRAD DELIVERY SYSTEM x3

• Model 532 Radius Traditional Delivery System

• Product Version B

• Foundation Price 532B Radius Mount with Deluxe Plus Touchpad

• Tray Holder Standard Side Mount

• Foot Control Disc (with chip blower/accessory button)

• Umbilical 1.5’

• Handing – Right

• Doctor’s Touchpad Deluxe Plus Touchpad

• Handpiece Tubing Style Silicone Handpiece Tubing

• Position 1 Autoclavable QD Syringe

Position 2 No Tubing

• Position 3 Satalec Newtron Slim Ultrasonic Module

• Add Ultrasonic Instrument Handpiece Satalec Newtron Slim B.LED

• Ultrasonic Tip Starter Kit Satalec Ultrasonic Tip Kit

Position 4 – 6 pin Tubing

• Position 5 – Kavo Electric Motor

• Position 6 – Kavo Electric Motor

• Electric Motor Control Module EMC-703

• USB Hub A-Dec USB 2.0 powered hub (Control Head)

• Preventive Maintenance Kit – No Kit

A-DEC 532 TRAD DELIVERY SYSTEM x1

• zModel 532 Radius Traditional Delivery System

• Product Version B

• Foundation Price 532B Radius Mount with Deluxe Plus Touchpad

• Tray Holder Standard Side Mount

• Foot Control Disc (with chip blower/accessory button)

• Umbilical 1.5’

• Handing – Right

• Doctor’s Touchpad Deluxe Plus Touchpad

• Handpiece Tubing Style Silicone Handpiece Tubing

• Position 1 Autoclavable QD Syringe

• Position 2 No Tubing

• Position 3 Cavitron Steri-mate 360 Ultrasonic

• Add Ultrasonic Instrument Handpiece Satalec Newtron Slim B.LED

• Ultrasonic Tip Starter Kit Satalec Ultrasonic Tip Kit

• Position 4 – 6 pin Tubing

• Position 5 – Kavo Electric Motor

• Position 6 – Kavo Electric Motor

• Electric Motor Control Module EMC-703

• USB Hub A-Dec USB 2.0 powered hub (Control Head)

• Preventive Maintenance Kit – No Kit

SALIENT CHARACTERISTICS:

• Integrated four position handpiece control block is capable of operating up to four active handpiece positions and is constructed of plated leadfree brass (per section 14.17 of the Safe Drinking Water Act).

Each handpiece position has an individual drive air and water adjustment. Removable water cartridge valves allow for quick and easy servicing of block. A single sliding locking tab secures the handpiece tubing to the control block requiring no tools and allows easy access to connect or disconnect tubing. Unique water-flow system eliminates dead ends that can harbor stagnant water.

• Positive Positioning lets doctors smoothly place the delivery where they want—and keeps it in place.

• LED Coolant indicator lights up when a handpiece is lifted out of the holder, to minimize second-guessing which knob to use when making adjustments.

• Customizable placement with six positions on the control head, for integration of almost any device they choose.

• Removable tray holder is integrated stackable and customizable.

• Left/Right convertible without the use of tools.

• Data Control System (DCS) is used to control all of the electrical components (fiber optics, heated syringe, touch pad, camera, electric micro-motors, and dental light). The DCS allows plug and play add-ons.

• Chair lockout stop feature prevents the accidental movement of the chair when a handpiece or instrument is in use.

• Silicone handpiece tubing contains anti-microbial AlphaSan® and quick-disconnects secured to the control block. Lighter, more flexible and more durable than vinyl tubing.

• A 2.0 liter, quick-connect water bottle is designed with an interior pickup tube which reduces the chance of cross-contamination.

• The system flush toggle has a flow-through design that eliminates stagnant water and flushes all tubings simultaneously.

• All interior water lines used throughout delivery system contain antimicrobial AlphaSan® which protects against microbial colonization on interior and exterior surfaces.

• The control head provides ample space to integrate up to six clinical devices.

• The flex arm enables easy routing of cables and tubings.

• USB extension cable is provided in delivery system umbilical.

• Handpiece holders are independently adjustable a full 45 degrees to allow precise positioning of instruments.

A-DEC 572L LED DENTAL LIGHT, RADIUS MT

SELECTIONS:

• Model 572L LED Dental Lt, Radius Mt

• Mounting Style Dual Mount – 500 Delivery System

• Chair Style – 511B Dental Chair

• Foundation Price 572 LED Light, Radius Mount

• Three axis barycentric positioning. Full 540 degrees of horizontal rotation. The Entire Light Head rotates

500-600°, the Optics Head rotates 105° ±5 total (0° up, 105° down), the Optics Head rotates 80° ±5° (±40° from vertical).

• Three intensity settings (15000/25000/30000lux) (1394/2323/2787fc)

• Cure-safe composite setting (25000lux(2323fc)/yellow): provides a “yellow” light providing ample illumination in the oral cavity without the premature curing of photo-initiated dental materials.

• Color Temperature: High fidelity ~90 CRI/5000K for accurate color rendering and tissue analysis.

• Ability/ease of positioning: Rotation axis about the rigid arm to flex arm interface: There is 315±5° of travel. The vertical travel shall be achieved via the parallel link system in the flex arm. This travel is to be

27.9 inches (71.1cm).

• Flexible, fracture resistant handles stay cool to touch, provide positive tactile feel, and protect head from potential impact damage.

• Thermal energy output: 24 BTU/hr nominal at High intensity. No radiant heat. No bulb replacement. 15- Watt power consumption.

• Orbital LED array on magnesium chassis dissipates heat passively, no hot surfaces or handles and does not require a cooling system or fan.

• Full touchpad control of light modes with auto on/off capabilities on A-dec’s DCS touch pads.

• Pattern and shadowing characteristics exceed ISO 9680 requirements. “Stadium” style LED array minimizes shadowing due to blockage from instruments and the dental team. When properly focused, the light pattern at 700 mm is 100±25mm x 150±25mm. Pattern size is defined at 10% of the maximum intensity.

The illumination shall decrease in intensity progressively and smoothly toward the pattern edge.

• Smooth surface exterior parts are able to be cleaned and disinfected without damage to the light’s surfaces or markings.

482 CHAIR MOUNTED MONITOR MOUNT

• Model 482 Light Post Monitor Mount

• Handle

• Dental Light Monitor Mount for Chair Mounted Light

• Mounting Style Monitor – Mount with Light

• Chair Style – Other Dental Chair

• Foundation Price 482 Monitor Mount – Light Post Mount

• No Post Required

545, 12 O'CLOCK ASST INSTRUMENTATION

SELECTIONS:

• Model 545 Assistant’s Instrumentation

• Foundation Price 545 12 O’Clock Assistant’s Instrumentation

• Voltage 120 Volts

• Mounting Style A-dec Inspire 591

• Work Surface Material Solid Surface

• Work Surface Solid Surface – Frosty White Mirage

• Countertop Price – Gibraltar Price

• Tray Holder – Standard

• Air and self-contained water QDs

• Power Supply Connector Kit – 545 to 511

• Assistants Instrumentation Holders

• Assistant’s Touchpad – Standard Touchpad

• Autoclavable QD syringe

• No curing light

• Assistants Curing Light Holder – None

• Dual Turret

• HVE Standard 11mm HVE

• Additional HVE 11mm HVE

• Vacuum Tubing Style – EasyFlex Tubing

• Height adjustable round work surface is 22 ½” diameter, constructed of ½” thick Wilsonart Gibraltar

(laminate). The adjustable height range is 33.5” to 36”. The work surface and support pivots 320° on a height adjustable post to allow for variable positioning in the treatment zone.

• Supports dual (2) HVE’s, Saliva ejector and air water syringe. Capable of holding ancillary devices (such as curing light, warm water syringe, Isolite, etc.).

• The internal water lines contain an anti-microbial AlphaSan™ to provide added protection against microbial contamination.

• Left/Right Hand Conversion without tools. All instrument delivery positions may be fully duplicated on either side of the work surface to allow both the right- and left-handed operator complete uncompromised utilization of the equipment.

• Multiple holder configurations including 3-position, 4-position, or dual 2-position.

• Individually articulating holders for maximum flexibility in instrument positioning.

• Modular, push-on connections on both ends of vacuum tubing for reliable seal and easy maintenance.

• Integral solids collector with fine mesh screen to trap materials from entering vacuum system.

• Standard multi-function touchpad provides secondary control of the chair and dental light.

• A self-contained water system is supplied to allow mounting remotely or to the 12 o’clock cabinet. The water system is pressurized with unit air and provides water to the syringe and water quick-disconnect.

The water bottle is a quick-disconnect design with an internal pickup tube to help reduce the opportunity for cross-contamination.

• Individual air and water pressure regulators.

• ON/OFF control of regulators provided by pneumatic master switch.

• Individual air pressure gauge.

591 INSPIRE REAR TREATMENT CONSOLE

SELECTIONS:

• Model 591 Inspire 12 O’Clock Console

• Product Version A

• Starting Point 42”

• Hall Side Back Panel Finished Back

• X-ray Attenuation – No X-ray Attenuation

• Delivery System Cabinet Mounted – 545

• Base Module Width 42”

• Base Module Name SB1003 – 42” Base with a cabinet mounted 545 Delivery System

• Lower Position 1 Module Width 14”

• Lower Position 1 Module Option 2 Swing out shelves

• Lower Position 1 Module Name DR1002 – Bi-fold, Side-open, 2x swing out shelf

• Lower Position 2 Module Width 14”

• Lower Position 2 Module Option Computer Storage with 5” Top Drawer

• Lower Position 2 Module Option D1204 – CPU Storage with 5” Drawer

• Lower Position 2 Hinge Location Left Hinge

• Lower Position 3 Module Width 14”

• Lower Position 3 Module Option 2 Swing out shelves

• Lower Position 3 Module Name DR1002 – Bi-fold, Side-open, 2x swing out shelf

• Power Panel Module Width 42”

• Power Panel Option None

• Midsection Module Width 42”

• Midsection Module Name WA1001- Wall, two floating shelves

• ICV Configuration Option – No ICV

• Upper Module Width 42”

• Monitor Mount – Yes

• Control Center – Yes

• Upper Module Name UP1010 – Non-pass thru, Wood Front, Control Center

• Upper Hinge Location – Left Hinge

• Top Extension Module Width 42”

• Top Extension Module Option Utility Extension

• Top Extension Module Name EX1002 – 16” Utility (42”)

• Countertop Module Width 42”

• Countertop Material Solid Surface

• Countertop Thickness ½” Thickness

• Countertop Module Name CS1101 – 42” Solid Surface Countertop ½”

• Countertop Color Solid Surface – Frosty White Mirage

• Cabinet Laminate Color – Landmark Wood

• Interior Wall Laminate Color – Landmark Wood

• Exterior Wall Laminate Color – Landmark Wood

• Air/Water Quick Disconnects – None

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

Curved end panels are Medium Density Fiberboard.

• Countertop is a 2 cm composite buildup of 0.236” thick plywood with phenolic backer (resistant to environmental effects of high humidity and moisture) and 12 mm thick acrylic resin, Wilsonart Gibraltaror DuPont Corian.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are CARB compliant. (Title 17, California Code of Regulation 93120).

• Cabinet columns are constructed of e-coated 12-gauge cold rolled steel for strength and rigidity.

• Door and drawer fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Exposed edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding.

• Drawers constructed with Blum Tandem box drawer system with integrated soft-close. The slides are tested to a 75-150 lb. dynamic load.

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments

• Sub-base structure is made from 10-gauge roll-formed steel with 16-gauge cold-rolled steel powder coated covers that are attached by rare earth neodymium magnets. Cabinet designed for seamless integration of A-dec 545 Assistant’s Instrumentation, inclusive of mechanical reinforcement and provisions for discrete utilities connectivity.

• Leveling feet are built into sub base structure for leveling cabinet prior to anchoring to the floor with seismic cleats designed to ASCE-05 standards.

• All internal wiring uses health care facility (HCF) grade armored cable with separate redundant ground wires and connections. Hospital grade, tamper resistant, 20 amp protected ground fault circuit interrupt (GFCI) duplex receptacles are provided at countertop level. All wiring is 12 gauge for 20-amp service.

• Base modules include cutouts to allow for the routing of wires and cables internal to the consoles.

593 INSPIRE SIDE CONSOLE (RIGHT SIDE LOWER)

• Model 593 – Inspire Side Support

• Product Version A

• Starting Point 70” Lower Only

• Cabinet Depth 19”

• Countertop Height 34”

• Sink Module Location Left

• Delivery System – No delivery

• Left Endcap – Flat Left Endcap

• Soap and Sanitizer Option – Soap and sanitizer dispensers

• Base Module width 70”

• Base Module Name SB3000 – Base

• Lower Position 1 Module Width 28”

• Plumbing Location – Wall

• Lower Position 1 Module Name SK3001 – Sink Module

• Lower Position 2 Module Width 14”

• Lower Position 2 Module Option Sharps and Wipes Storage

• Lower Position 2 Module Name DR3202 – Door Storage, Sharps, Wipes

• ICV Configuration Option – NO ICV

• Lower Position 2 Hinge Location Left Hinge

• Lower Position 3 Module width 14”

• Lower Position 3 Module Option 7.5”-10”-10” Drawer module

• Lower Position 3 Module Name DB3005 – 7.5”-10”-10” Drawers

• Lower Position 4 Module Width 14”

• Lower Position 4 Module Option 5”-5”-5”-5”-7.5” Drawers

• Countertop Module Width 70”

• Countertop Material Solid Surface

• Sink Package Undermount Stainless Steel

• Countertop thickness ½” thickness

• Countertop Module Name CS3116 – 70” Solid Surface Countertop, Under Mount SS, ½”

• Countertop Color Solid Surface – Frosty White Mirage

• Cabinate Laminate Color – Landmark Wood

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

Curved end panels are Medium Density Fiberboard.

• Countertop is a 2 cm composite buildup of 0.236” thick plywood with phenolic backer (resistant to environmental effects of high humidity and moisture) and 12 mm thick acrylic resin, Wilsonart Gibraltar or DuPont Corian.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are CARB compliant. (Title 17, California Code of Regulation 93120). Cabinet columns are constructed of e-coated 12-gauge cold rolled steel for strength and rigidity.

• Door and drawer fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Drawers constructed with Blum Tandem box drawer system with integrated soft close. The slides are tested to a 75-150 lb. dynamic load.

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments.

• Door and drawer edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding.

• Sub base structure is made from 10-gauge roll-formed steel with 16-gauge cold-rolled steel powder coated covers that are attached by rare earth neodymium magnets.

• Leveling feet are built into sub base structure for leveling cabinet prior to anchoring to the floor with seismic cleats designed to ASCE-05 standards.

• Base modules include a cutout to allow for the routing of wires and cables internal to the consoles.

595 INSPIRE WALL MOUNTED CABINET (UPPER RIGHT DOCTOR SIDE)

• Model 595 – Inspire Storage and Dispensing

• Product Version A

• Starting Point 56” Wall Hung Upper

• Dispenser Location Left

• X-ray Attenuation – No X-ray Attenuation

• Left Endcap – Flat Left Endcap

• Right Endcap – Flat Right Endcap

• Upper Position 1 Module Width 28”

• UP1 Dispenser Door Style Wood Doors

• Upper Position 1 Module Name DS5002 – Upper Dispensing, Wood doors, Gloves (2), Mask, Cup, Towel

• Light/Monitor Mount Location – None

• Upper Position 2 Module Width 28”

• Upper Position 2 Doors Style Wood Doors

• Upper Position 2 Module Name UP5002 – Upper Storage, Wood Doors

• Cabinet Laminate Color – Landmark Wood

SALIENT CHARACTERISTICS:

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

Curved end panels are Medium Density Fiberboard.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are CARB compliant. (Title 17, California Code of Regulation 93120).

• Door fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Exposed edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments.

• Mask dispenser fits masks boxes with maximum dimensions up of: 4”W x 7.25”L

• Cup Dispenser fits: 4 to 5 oz. cups.

• Towel Dispenser fits: C-fold or Z-fold towels

• Glove Dispenser fits: 6.25”- 6.5”W x 10.5”-10.75”L box dimensions.

593 INSPIRE SIDE CONSOLE (LEFT ASSISTANT SIDE LOWER)

• Model 593 – Inspire Side Support

• Product Version A

• Starting Point 70” Lower Only

• Cabinet Depth 19”

• Countertop Height 34”

• Sink Module Location Right

• Delivery System – No delivery

• Left Endcap – Flat Left Endcap

• Right Endcap – Flat Right Endcap

• Soap and Sanitizer Option – Soap and sanitizer dispensers

• Base Module width 70”

• Base Module Name SB3000 – Base

• Lower Position 1 Module Width 28”

• Plumbing Location – Wall

• Lower Position 1 Module Name SK3001 – Sink Module

• Lower Position 2 Module Width 14”

• Lower Position 2 Module Option Sharps and Wipes Storage

• Lower Position 2 Module Name DR3202 – Door Storage, Sharps, Wipes

• ICV Configuration Option – NO ICV

• Lower Position 2 Hinge Location Right Hinge

• Lower Position 3 Module width 14”

• Lower Position 3 Module Option 7.5”-10”-10” Drawer module

• Lower Position 3 Module Name DB3005 – 7.5”-10”-10” Drawers

• Lower Position 4 Module Width 14”

• Lower Position 4 Module Option 5”-5”-5”-5”-7.5” Drawers

• Countertop Module Width 70”

• Countertop Material Solid Surface

• Sink Package Undermount Stainless Steel

• Countertop thickness ½” thickness

• Countertop Module Name CS3116 – 70” Solid Surface Countertop, Under Mount SS, ½”

• Countertop Color Solid Surface – Frosty White Mirage

• Cabinate Laminate Color – Landmark Wood

• SALIENT CHARACTERISTICS:

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

Curved end panels are Medium Density Fiberboard.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are

CARB compliant. (Title 17, California Code of Regulation 93120).

• Door fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Exposed edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments.

• Mask dispenser fits masks boxes with maximum dimensions up of: 4”W x 7.25”L

• Cup Dispenser fits: 4 to 5 oz. cups.

595 INSPIRE WALL MOUNTED CABINET (LEFT ASSISTANT SIDE UPPER)

• Model 595 – Inspire Storage and Dispensing

• Product Version A

• Starting Point 56” Wall Hung Upper

• Dispenser Location Right

• X-ray Attenuation – No X-ray Attenuation

• Left Endcap – Flat Left Endcap

• Right Endcap – Flat Right Endcap

• Upper Position 1 Module Width 28”

• UP1 Dispenser Door Style Wood Doors

• Upper Position 1 Module Name DS5002 – Upper Dispensing, Wood doors, Gloves (2), Mask, Cup, Towel

• Light/Monitor Mount Location – None

• Upper Position 2 Module Width 28”

• Upper Position 2 Doors Style Wood Doors

• Upper Position 2 Module Name UP5002 – Upper Storage, Wood Doors

• Cabinet Laminate Color – Landmark Wood

SALIENT CHARACTERISTICS:

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

Curved end panels are Medium Density Fiberboard.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are CARB compliant. (Title 17, California Code of Regulation 93120).

• Door fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Exposed edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments.

• Mask dispenser fits masks boxes with maximum dimensions up of: 4”W x 7.25”L

• Cup Dispenser fits: 4 to 5 oz. cups.

QUATTROCARE PLUS, KAVO

• 120V, 50/60Hz, 20 amps electrical connection

• Air consumption: 50 mL/min or 1.765 cfm

• Easily connects to ¼" airline

• 58 to 87 psi air pressure recommended (max 145 psi)

• Built-in, automatic pressure regulator controls flow

• Height: 15", Width: 13 9/16", Depth: 11 1/2"

• Weight: 22 lbs.

LEXA PLUS CLASS B STERILIZER

SALIENT CHARACTERISTICS:

• WiFi connectivity, remote cell phone monitoring, and cycle report and label printers.

• Rack

• 5 Aluminum Trays

• Drain Hose

• Tray Holder

• 8 GB USB Stick

• Door Opening Tool

• Factory Test

• Universal rack offers flexibility for easy vertical or horizontal placement of pouches and cassettes – even providing capability for mixed loads.

• Single-use water system provides two tanks (one for clean water and the other for dirty water) so water is never reused.

• Six pre-programmed and three custom cycles provide choice for the fastest cycles of any size load.

• Intuitive LCD display and simple prompts, such as alerts when the reservoir’s water is low, for ease of operation.

• User authentication system helps manage and document each sterilization cycle initiation and release.

IMAGING ECOSYSTEM

PLANMECA ProSensor W/ Sensor Size 2 PLANMECA ProSensor W/ Sensor Size 1 PLANMECA ProSensor W/ Sensor Size 0

Sensor size Size 0 - 33.6 x 23.4 mm (1.33 x 0.92 in.)

Size 1 - 39.7 x 25.1 mm (1.56 x 0.99 in.)

Size 2 - 44.1 x 30.4 mm (1.76 x 1.2 in.)

Active area Size 0 - 25.5 x 18.9 mm (1.0 x 0.74 in.)

Size 1 - 30.6 x 20.7 mm (1.20 x 0.81 in.)

Size 2 - 36 x 26.1 mm (1.42 x 1.03 in.)

Number of pixels, normal Size 0 - 850 x 629 px Size 1 - 1020 x 690 px Size 2 - 1200 x 870 px Number of pixels, high Size 1 - 2040 x 1380 px Size 2 - 2400 x 1740 px Pixel size, normal 30 μm x 30 μm Pixel size, high 15 μm x 15 μm Theoretical resolution 33 lp/mm Resolution, normal 17 lp/mm Resolution, high >20 lp/mm Interface USB or Ethernet View delay <5 sec.

VATECH EZ Ray Air Portable X-Ray

• EzRay Air P: VEX-P300

• Focal Spot – 0.4mm (IEC 60336)

• Tube Voltage – 65 kV

• Tube Current – 2.5 mA

• Exposure Time Range – 0.05~1.0 sec

• Total Filtration – Min. 1.5mm Al

• Source to Skin Distance – 200mm

• X-ray Field – Default: 60 mm Round, 30 x 40 mm Rectangular, Optional 20 x 30 mm Rectangular

• Maximum Duty Cycle – 1:60

• Power Input – 21.6 V

• Weight – 4.7 lbs. (2.1 kg)

PLANMECA ProX w/Sgl Stud Mt & 88 IN

594 INSPIRE STERILIZATION CENTER

• Model 594 – Inspire Sterilization Center

• Product Version B

• Starting Point Straight

• Process Direction Left to Right

• Air/Water Quick Disconnects – None

• Upper Storage Door/s Style Wood Doors

• Soap and Sanitizer Option – Soap and Sanitizer Dispensers

• Receiving Endcap Module Name EC4005 – Full Flat Endcap

• R & C Position 1 Module Width 14”

• R & C Position 1 Module Name DR4003 – Trash Drop

• R & C Position 2 Module Width 28”

• R & C Position 2 Module Name EQ4205 – Ultrasonic Cleaning with Reduced Countertop Height

• R & C Position 3 Module Width 10”

• R & C Position 3 Module Name DR4001 – Door Storage with 1 Shelf

• R & C Position 4 Module Width 18”

• R & C Position 4 Module Name SK4007 – Sink with Trash, HVE and syringe

• R & C Position 5 Module Width 28”

• R & C Position 5 Module Name DB4006 – 5”-5”-5”-12.5” Drawers

• ST and SS Towers Position 1 Module Width 28”

• ST and SS Towers Position 1 Doors Style Wood Doors

• ST and SS Towers Position 1 Module Name TW4008 – Sterilization, Dual Chamber, 21”-23” Opening Wood

Doors

• ST and SS Towers Position 2 Module width 14”

• Infill Option – Blue Infill

• ST and SS Towers Position 2 Doors Style Aluminum Doors

• ST and SS Towers Position 2 Module Name TW4104 Door Storage Lower with Manually Activated Slide out

Storage Above

• Sterile Endcap Module Name EC4005 – Full Flat Endcap

• Countertop Module Width 98”

• Countertop Material Solid Surface

• Countertop Module Name CS4003 – 98” Solid Surface Countertop

• Color Wall Module Width 98”

• Color Wall Module Name WA4003 – 98” Color Wall

• Accessory Shelf 14” Accessory Shelf

• Packaging Prep Shelf Leg 1 None

• Packaging Prep Shelf Leg 2 None

• Upper Position 1 Module Width 28”

• Infill Option Red Infill

• Upper Position 1 Doors Style Aluminum Doors

• Upper Position 1 Module Name UP4004 – 28” Manually Activated Upper Storage, Aluminum Doors

• Upper Position 2 Module Width 28”

• Upper Position 2 Doors Style Wood Doors

• Upper Position 2 Module Name UP4003 – 28” Upper Storage, Wood Doors

• Upper Position 3 Module Width 28”

• Upper Position 3 Doors Style Wood Doors

• Upper Position 3 Module Name UP4007 – 28” Upper Dispenser with 2 Gloves, Wood Doors

• Upper Position 4 Module Width 14”

• Upper Position 4 Doors Style Wood Doors

• Upper Position 4 Module Name UP4009 – 14” Upper Storage, Wood Door

• Subbase Module Name SB4000 – Base

• Countertop Color Solid Surface – Frosty White Mirage

• Cabinet Laminate Color – Landmark Wood

• Interior Wall Laminate Color – Landmark Wood

• Length Price 140”

• Cabinet shell and related component parts are 5/8" or 3/4” thick, 45# industrial grade particleboard.

• Curved end panels are Medium Density Fiberboard.

• Countertop is a 2 cm composite buildup of 0.236” thick plywood with phenolic backer (resistant to environmental effects of high humidity and moisture) and 12

• mm thick acrylic resin, Wilsonart Gibraltar or DuPont Corian.

• All particleboard is 100% post-industrial recycled/recovered fiber. All particleboard and plywood are CARB compliant. (Title 17, California Code of Regulation 93120).

• Cabinet columns are constructed of e-coated 12-gauge cold rolled steel for strength and rigidity.

• Door and drawer fronts covered with vertical grade high pressure V32 laminate (HPDL). Locks are available.

• Exposed edges are finished with color matched 2 mm thick rigid PVC (polyvinyl chloride) edge banding.

• Drawers constructed with Blum Tandem box drawer system with integrated soft-close. The slides are tested to a 75-150 lb. dynamic load.

• Door hinges are Blum CLIP top Blumotion hinges constructed of nickel-plated steel with integrated soft-close and three-way adjustments

• Sub-base structure is made from 10-gauge roll-formed steel with 16-gauge cold-rolled steel powder coated covers that are attached by rare earth neodymium magnets. Leveling feet are built into sub base structure for leveling cabinet prior to anchoring to the floor with seismic cleats designed to ASCE-05 standards.

• All internal wiring uses health care facility (HCF) grade armored cable with separate redundant ground wires and connections. Hospital grade, tamper resistant, 20 amp protected ground fault circuit interrupt (GFCI) duplex receptacles are provided at countertop level. All wiring is 12 gauge for 20 amp service.